87,034 research outputs found
Cutout reinforcements for shear loaded laminate and sandwich composite panels
This paper presents the numerical and experimental studies of shear loaded
laminated and sandwich carbon/epoxy composite panels with cutouts and
reinforcements aiming at reducing the cutout stress concentration and increasing
the buckling stability of the panels. The effect of different cutout sizes and
the design and materials of cutout reinforcements on the stress and buckling
behaviour of the panels are evaluated. For the sandwich panels with a range of
cutout size and a constant weight, an optimal ratio of the core to the face
thickness has been studied for the maximum buckling stability. The finite
element method and an analytical method are employed to perform parametric
studies. In both constant stress and constant displacement shear loading
conditions, the results are in very good agreement with those obtained from
experiment for selected cutout reinforcement cases. Conclusions are drawn on the
cutout reinforcement design and improvement of stress concentration and buckling
behaviour of shear loaded laminated and sandwich composite panels with cutouts
Modeling of residual spheres for subduction zone earthquakes: 1. Apparent slab penetration signatures in the NW Pacific caused by deep diffuse mantle anomalies
We have computed focal residual spheres for 145 subduction zone earthquakes along the northwest edge of the Pacific using regional and global mantle velocity models from tomographic inversions. The mantle models explain much of the observed residual sphere data and, to a certain extent, suggest the location of mantle velocity heterogeneities which are responsible for various residual sphere patterns. For most deep events considered, the fast slablike residual sphere anomalies are caused by diffuse heterogeneities, mainly of deep lower mantle and receiver mantle origin rather than by an extension of the slab. The region immediately below the deepest earthquakes, depths of 650–1500 km, has an effect usually smaller than or comparable to the effect of other regions of the mantle. Without a proper account of the teleseismic effect, attributing the long-wavelength anomalies of the residual sphere to near-source slab effects alone, or even primarily, is not valid. The fast bands in many observed residual spheres agree with seismicity trends. Once the deep mantle and receiver mantle effects are removed, these may give the approximate orientation, but not the depth extent, of near-source fast velocities. For most deep earthquakes under Japan the predominant fast band is subhorizontal rather than near vertical. This type feature would be overlooked in conventional residual sphere studies using only steeply diving rays and cosine weighting of the data
Overheating threshold and its effect on time–temperature-transformation diagrams of zirconium based bulk metallic glasses
A pronounced effect of overheating is observed on the crystallization behavior for the three zirconium-based bulk metallic glasses: Zr41.2Ti13.8Cu12.5Ni10Be22.5, Zr57Cu15.4Ni12.6Al10Nb5, and Zr52.5Cu17.9Ni14.6Al10Ti5. A threshold overheating temperature is found for each of the three alloys, above which there is a drastic increase in the undercooling level and the crystallization times. Time–temperature-transformation (TTT) diagrams were measured for the three alloys by overheating above their respective threshold temperatures. The TTT curves for Zr41.2Ti13.8Cu12.5Ni10Be22.5 and Zr57Cu15.4Ni12.6Al10Nb5 are very similar in shape and scale with their respective glass transition temperatures, suggesting that system-specific properties do not play a crucial role in defining crystallization kinetics in these alloys. The critical cooling rates to vitrify the alloys as determined from the TTT curves are about 2 K/s for Zr41.2Ti13.8Cu12.5Ni10Be22.5 and 10 K/s for Zr57Cu15.4Ni12.6Al10Nb5. The measurements were conducted in a high-vacuum electrostatic levitator
Optimal transfer of an unknown state via a bipartite operation
A fundamental task in quantum information science is to transfer an unknown
state from particle to particle (often in remote space locations) by
using a bipartite quantum operation . We suggest the power of
for quantum state transfer (QST) to be the maximal average
probability of QST over the initial states of particle and the
identifications of the state vectors between and . We find the QST power
of a bipartite quantum operations satisfies four desired properties between two
-dimensional Hilbert spaces. When and are qubits, the analytical
expressions of the QST power is given. In particular, we obtain the exact
results of the QST power for a general two-qubit unitary transformation.Comment: 6 pages, 1 figur
- …