Microbiological testing of adults hospitalised with community-acquired pneumonia: An international study

This study aimed to describe real-life microbiological testing of adults hospitalised with community-acquired pneumonia (CAP) and to assess concordance with the 2007 Infectious Diseases Society of America (IDSA)/American Thoracic Society (ATS) and 2011 European Respiratory Society (ERS) CAP guidelines. This was a cohort study based on the Global Initiative for Methicillin-resistant Staphylococcus aureus Pneumonia (GLIMP) database, which contains point-prevalence data on adults hospitalised with CAP across 54 countries during 2015. In total, 3702 patients were included. Testing was performed in 3217 patients, and included blood culture (71.1%), sputum culture (61.8%), Legionella urinary antigen test (30.1%), pneumococcal urinary antigen test (30.0%), viral testing (14.9%), acute-phase serology (8.8%), bronchoalveolar lavage culture (8.4%) and pleural fluid culture (3.2%). A pathogen was detected in 1173 (36.5%) patients. Testing attitudes varied significantly according to geography and disease severity. Testing was concordant with IDSA/ATS and ERS guidelines in 16.7% and 23.9% of patients, respectively. IDSA/ATS concordance was higher in Europe than in North America (21.5% versus 9.8%; p<0.01), while ERS concordance was higher in North America than in Europe (33.5% versus 19.5%; p<0.01). Testing practices of adults hospitalised with CAP varied significantly by geography and disease severity. There was a wide discordance between real-life testing practices and IDSA/ATS/ERS guideline recommendations

Atypical pathogens in hospitalized patients with community-acquired pneumonia: A worldwide perspective

Background: Empirical antibiotic coverage for atypical pathogens in community-acquired pneumonia (CAP) has long been debated, mainly because of a lack of epidemiological data. We aimed to assess both testing for atypical pathogens and their prevalence in hospitalized patients with CAP worldwide, especially in relation with disease severity. Methods: A secondary analysis of the GLIMP database, an international, multicentre, point-prevalence study of adult patients admitted for CAP in 222 hospitals across 6 continents in 2015, was performed. The study evaluated frequency of testing for atypical pathogens, including L. pneumophila, M. pneumoniae, C. pneumoniae, and their prevalence. Risk factors for testing and prevalence for atypical pathogens were assessed through univariate analysis. Results: Among 3702 CAP patients 1250 (33.8%) underwent at least one test for atypical pathogens. Testing varies greatly among countries and its frequency was higher in Europe than elsewhere (46.0% vs. 12.7%, respectively, p < 0.0001). Detection of L. pneumophila urinary antigen was the most common test performed worldwide (32.0%). Patients with severe CAP were less likely to be tested for both atypical pathogens considered together (30.5% vs. 35.0%, p = 0.009) and specifically for legionellosis (28.3% vs. 33.5%, p = 0.003) than the rest of the population. Similarly, L. pneumophila testing was lower in ICU patients. At least one atypical pathogen was isolated in 62 patients (4.7%), including M. pneumoniae (26/251 patients, 10.3%), L. pneumophila (30/1186 patients, 2.5%), and C. pneumoniae (8/228 patients, 3.5%). Patients with CAP due to atypical pathogens were significantly younger, showed less cardiovascular, renal, and metabolic comorbidities in comparison to adult patients hospitalized due to non-atypical pathogen CAP. Conclusions: Testing for atypical pathogens in patients admitted for CAP in poorly standardized in real life and does not mirror atypical prevalence in different settings. Further evidence on the impact of atypical pathogens, expecially in the low-income countries, is needed to guidelines implementation

Prevalence and etiology of community-acquired pneumonia in immunocompromised patients

Background. The correct management of immunocompromised patients with pneumonia is debated. We evaluated the prevalence, risk factors, and characteristics of immunocompromised patients coming from the community with pneumonia. Methods. We conducted a secondary analysis of an international, multicenter study enrolling adult patients coming from the community with pneumonia and hospitalized in 222 hospitals in 54 countries worldwide. Risk factors for immunocompromise included AIDS, aplastic anemia, asplenia, hematological cancer, chemotherapy, neutropenia, biological drug use, lung transplantation, chronic steroid use, and solid tumor. Results. At least 1 risk factor for immunocompromise was recorded in 18% of the 3702 patients enrolled. The prevalences of risk factors significantly differed across continents and countries, with chronic steroid use (45%), hematological cancer (25%), and chemotherapy (22%) the most common. Among immunocompromised patients, community-acquired pneumonia (CAP) pathogens were the most frequently identified, and prevalences did not differ from those in immunocompetent patients. Risk factors for immunocompromise were independently associated with neither Pseudomonas aeruginosa nor non\u2013community-acquired bacteria. Specific risk factors were independently associated with fungal infections (odds ratio for AIDS and hematological cancer, 15.10 and 4.65, respectively; both P = .001), mycobacterial infections (AIDS; P = .006), and viral infections other than influenza (hematological cancer, 5.49; P < .001). Conclusions. Our findings could be considered by clinicians in prescribing empiric antibiotic therapy for CAP in immunocompromised patients. Patients with AIDS and hematological cancer admitted with CAP may have higher prevalences of fungi, mycobacteria, and noninfluenza viruses

Burden and risk factors for Pseudomonas aeruginosa community-acquired pneumonia:a Multinational Point Prevalence Study of Hospitalised Patients

Pseudornonas aeruginosa is a challenging bacterium to treat due to its intrinsic resistance to the antibiotics used most frequently in patients with community-acquired pneumonia (CAP). Data about the global burden and risk factors associated with P. aeruginosa-CAP are limited. We assessed the multinational burden and specific risk factors associated with P. aeruginosa-CAP. We enrolled 3193 patients in 54 countries with confirmed diagnosis of CAP who underwent microbiological testing at admission. Prevalence was calculated according to the identification of P. aeruginosa. Logistic regression analysis was used to identify risk factors for antibiotic-susceptible and antibiotic-resistant P. aeruginosa-CAP. The prevalence of P. aeruginosa and antibiotic-resistant P. aeruginosa-CAP was 4.2% and 2.0%, respectively. The rate of P. aeruginosa CAP in patients with prior infection/colonisation due to P. aeruginosa and at least one of the three independently associated chronic lung diseases (i.e. tracheostomy, bronchiectasis and/or very severe chronic obstructive pulmonary disease) was 67%. In contrast, the rate of P. aeruginosa-CAP was 2% in patients without prior P. aeruginosa infection/colonisation and none of the selected chronic lung diseases. The multinational prevalence of P. aeruginosa-CAP is low. The risk factors identified in this study may guide healthcare professionals in deciding empirical antibiotic coverage for CAP patients

Wpływ parametrów procesu wtryskiwania na właściwości fizyczne, chemiczne i mechaniczne polilaktydu (PLA)

Purpose: The aim of this paper was to assess the influence of parameters of the injection moulding process on changes in selected physiochemical properties and performance of parts made from PLA. Materials/Methods: 6201D trade polylactide by NatureWorks was used for the tests. Before the tests, the plastic was dried according to the manufacturer’s recommendations, and then injected by means of a Borche BS60 injection moulding machine. The process of injection was carried out at excessively high or excessively low process parameters. The obtained samples were subjected to tensile testing; then, their physiochemical properties were assessed by means of DSC, TGA and GPC. Results: The obtained test results indicate that parameters of the injection moulding process have an impact on the characteristics of parts made from PTA, such as: tensile strength, molecular mass, the degree of crystallinity, and time of degradation. Conclusions: The influence of the parameters of the injection moulding process on the changes of, among others, molecular mass, the degree of crystallinity and mechanical properties of PLA were observed. The obtained research results show that there exists a relationship between the parameters of the injection moulding process and molecular mass, the degree of crystallinity, and mechanical properties of parts made from polylactide. Considering that a change in molecular mass has an impact on the rate of PLA degradation, it is possible to control time of degradation, through the control of parameters of the injection moulding process.W pracy przedstawiono wyniki badań wpływu parametrów procesu wtryskiwania na właściwości fizyczne, chemiczne i mechaniczne wyrobów z PLA. W badaniach stosowano handlowy polilaktyd 6201D firmy NatureWorks. Materiał był suszony zgodnie z zaleceniami producenta. Proces wtryskiwania wykonano za pomocą wtryskarki Borche BS60. Zrealizowany był dla jego dopuszczalnych maksymalnych i minimalnych parametrów. Dla wytworzonego materiału określono właściwości mechaniczne w próbie statycznej rozciągania oraz właściwości fizyczne i chemiczne metodami DSC, TGA i GPC. Analiza uzyskanych wyników badań wskazuje na wpływ parametrów procesu wtryskiwania na: wytrzymałość na rozciąganie, masę cząsteczkową, stopień krystaliczności, temperaturę rozpadu. Ustalono stopień korelacji pomiędzy parametrami procesu wtryskiwania a masą cząsteczkową, stopniem krystalizacji oraz właściwościami mechanicznymi wyrobów. Stwierdzono, że zmiana masy cząsteczkowej ma wpływ na kinetykę rozpadu polilaktydu PLA. Istnieje więc możliwość kontrolowanego sterowania czasem rozpadu PLA, poprzez sterowanie parametrami procesu wtryskiwania