1,060 research outputs found
H2 reformation in post-shock regions
H2 formation is an important process in post-shock regions, since H2 is an
active participant in the cooling and shielding of the environment. The onset
of H2 formation therefore has a strong effect on the temperature and chemical
evolution in the post shock regions. We recently developed a model for H2
formation on a graphite surface in warm conditions. The graphite surface acts
as a model system for grains containing large areas of polycyclic aromatic
hydrocarbon structures. Here this model is used to obtain a new description of
the H2 formation rate as a function of gas temperature that can be implemented
in molecular shock models. The H2 formation rate is substantially higher at
high gas temperatures as compared to the original implementation of this rate
in shock models, because of the introduction of H atoms which are chemically
bonded to the grain (chemisorption). Since H2 plays such a key role in the
cooling, the increased rate is found to have a substantial effect on the
predicted line fluxes of an important coolant in dissociative shocks [O I] at
63.2 and 145.5 micron. With the new model a better agreement between model and
observations is obtained. Since one of the goals of Herschel/PACS will be to
observe these lines with higher spatial resolution and sensitivity than the
former observations by ISO-LWS, this more accurate model is very timely to help
with the interpretation of these future results.Comment: 12 pages, 3 figures, 1 table, accepted in MNRAS Letter
A kinetic Monte Carlo study of desorption of H2 from graphite (0001)
The formation of H2 in the interstellar medium proceeds on the surfaces of
silicate or carbonaceous particles. To get a deeper insight of its formation on
the latter substrate, this letter focuses on H2 desorption from graphite (0001)
in Temperature-Programmed-Desorption Monte-Carlo simulations. The results are
compared to experimental results which show two main peaks and an intermediate
shoulder for high initial coverage. The simulation program includes barriers
obtained by ab-initio methods and is further optimised to match two independent
experimental observations. The simulations reproduce the two experimental
observed desorption peaks. Additionally, a possible origin of the intermediate
peak is given.Comment: 9 pages, 5 figures, Chem. Phys. Lett. in pres
Measurement of the mass and lifetime of the baryon
A proton-proton collision data sample, corresponding to an integrated
luminosity of 3 fb collected by LHCb at and 8 TeV, is used
to reconstruct , decays. Using the , decay mode for calibration, the lifetime ratio and absolute
lifetime of the baryon are measured to be \begin{align*}
\frac{\tau_{\Omega_b^-}}{\tau_{\Xi_b^-}} &= 1.11\pm0.16\pm0.03, \\
\tau_{\Omega_b^-} &= 1.78\pm0.26\pm0.05\pm0.06~{\rm ps}, \end{align*} where the
uncertainties are statistical, systematic and from the calibration mode (for
only). A measurement is also made of the mass difference,
, and the corresponding mass, which
yields \begin{align*} m_{\Omega_b^-}-m_{\Xi_b^-} &= 247.4\pm3.2\pm0.5~{\rm
MeV}/c^2, \\ m_{\Omega_b^-} &= 6045.1\pm3.2\pm 0.5\pm0.6~{\rm MeV}/c^2.
\end{align*} These results are consistent with previous measurements.Comment: 11 pages, 5 figures, All figures and tables, along with any
supplementary material and additional information, are available at
https://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-PAPER-2016-008.htm
Observation of two new baryon resonances
Two structures are observed close to the kinematic threshold in the mass spectrum in a sample of proton-proton collision data, corresponding
to an integrated luminosity of 3.0 fb recorded by the LHCb experiment.
In the quark model, two baryonic resonances with quark content are
expected in this mass region: the spin-parity and
states, denoted and .
Interpreting the structures as these resonances, we measure the mass
differences and the width of the heavier state to be
MeV,
MeV,
MeV, where the first and second
uncertainties are statistical and systematic, respectively. The width of the
lighter state is consistent with zero, and we place an upper limit of
MeV at 95% confidence level. Relative
production rates of these states are also reported.Comment: 17 pages, 2 figure
Bose-Einstein correlations of same-sign charged pions in the forward region in pp collisions at √s=7 TeV
Bose-Einstein correlations of same-sign charged pions, produced in protonproton collisions at a 7 TeV centre-of-mass energy, are studied using a data sample collected
by the LHCb experiment. The signature for Bose-Einstein correlations is observed in the
form of an enhancement of pairs of like-sign charged pions with small four-momentum
difference squared. The charged-particle multiplicity dependence of the Bose-Einstein correlation parameters describing the correlation strength and the size of the emitting source
is investigated, determining both the correlation radius and the chaoticity parameter. The
measured correlation radius is found to increase as a function of increasing charged-particle
multiplicity, while the chaoticity parameter is seen to decreas
Constraints on the unitarity triangle angle from Dalitz plot analysis of decays
The first study is presented of CP violation with an amplitude analysis of
the Dalitz plot of decays, with , and . The analysis is based on a data sample corresponding to
of collisions collected with the LHCb detector. No
significant CP violation effect is seen, and constraints are placed on the
angle of the unitarity triangle formed from elements of the
Cabibbo-Kobayashi-Maskawa quark mixing matrix. Hadronic parameters associated
with the decay are determined for the first time. These
measurements can be used to improve the sensitivity to of existing and
future studies of the decay.Comment: All figures and tables, along with any supplementary material and
additional information, are available at
https://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-PAPER-2015-059.html;
updated to correct figure 9 (numerical results unchanged
Observation of the decay
The decay is observed in collision
data corresponding to an integrated luminosity of 3 fb recorded by the
LHCb detector at centre-of-mass energies of 7 TeV and 8 TeV. This is the first
observation of this decay channel, with a statistical significance of 15
standard deviations. The mass of the meson is measured to be
MeV/c. The branching fraction ratio
is measured to be 0.0115\,\pm\, 0.0012\, ^{+0.0005}_{-0.0009}.
In both cases, the first uncertainty is statistical and the second is
systematic. No evidence for non-resonant or decays is found.Comment: All figures and tables, along with any supplementary material and
additional information, are available at
https://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-PAPER-2015-033.htm
Search for hidden-sector bosons in decays
A search is presented for hidden-sector bosons, , produced in the decay
, with and
. The search is performed using -collision data
corresponding to 3.0 fb collected with the LHCb detector. No significant
signal is observed in the accessible mass range
MeV, and upper limits are placed on the branching fraction product
as
a function of the mass and lifetime of the boson. These limits are of
the order of for lifetimes less than 100 ps over most of the
range, and place the most stringent constraints to date on many
theories that predict the existence of additional low-mass bosons.Comment: All figures and tables, along with supplementary material, are
available at
https://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-PAPER-2015-036.htm
Measurement of the mass and lifetime of the baryon
A proton-proton collision data sample, corresponding to an integrated
luminosity of 3 fb collected by LHCb at and 8 TeV, is used
to reconstruct , decays. Using the , decay mode for calibration, the lifetime ratio and absolute
lifetime of the baryon are measured to be \begin{align*}
\frac{\tau_{\Omega_b^-}}{\tau_{\Xi_b^-}} &= 1.11\pm0.16\pm0.03, \\
\tau_{\Omega_b^-} &= 1.78\pm0.26\pm0.05\pm0.06~{\rm ps}, \end{align*} where the
uncertainties are statistical, systematic and from the calibration mode (for
only). A measurement is also made of the mass difference,
, and the corresponding mass, which
yields \begin{align*} m_{\Omega_b^-}-m_{\Xi_b^-} &= 247.4\pm3.2\pm0.5~{\rm
MeV}/c^2, \\ m_{\Omega_b^-} &= 6045.1\pm3.2\pm 0.5\pm0.6~{\rm MeV}/c^2.
\end{align*} These results are consistent with previous measurements.Comment: 11 pages, 5 figures, All figures and tables, along with any
supplementary material and additional information, are available at
https://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-PAPER-2016-008.htm
A new algorithm for identifying the flavour of mesons at LHCb
A new algorithm for the determination of the initial flavour of
mesons is presented. The algorithm is based on two neural networks and exploits
the hadron production mechanism at a hadron collider. The first network is
trained to select charged kaons produced in association with the meson.
The second network combines the kaon charges to assign the flavour and
estimates the probability of a wrong assignment. The algorithm is calibrated
using data corresponding to an integrated luminosity of 3 fb collected
by the LHCb experiment in proton-proton collisions at 7 and 8 TeV
centre-of-mass energies. The calibration is performed in two ways: by resolving
the - flavour oscillations in
decays, and by analysing flavour-specific
decays. The tagging power measured in decays is found
to be \%, which is an
improvement of about 50\% compared to a similar algorithm previously used in
the LHCb experiment.Comment: All figures and tables, along with any supplementary material and
additional information, are available at
https://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-PAPER-2015-056.htm
- …