Recent ASDEX Upgrade research in support of ITER and DEMO

Recent experiments on the ASDEX Upgrade tokamak aim at improving the physics base for ITER and DEMO to aid the machine design and prepare efficient operation. Type I edge localized mode (ELM) mitigation using resonant magnetic perturbations (RMPs) has been shown at low pedestal collisionality ( ν ∗ ped < 0 . 4 ) . In contrast to the previous high ν ∗ regime, suppression only occurs in a narrow RMP spectral window, indicating a resonant process, and a concomitant confinement drop is observed due to a reduction of pedestal top density and electron temperature. Strong evidence is found for the ion heat flux to be the decisive element for the L–H power threshold. A physics based scaling of the density at which the minimum P LH occurs indicates that ITER could take advantage of it to initiate H-mode at lower density than that of the final Q = 10 operational point. Core density fluctuation measurements resolved in radius and wave number show that an increase of R/L T e introduced by off-axis electron cyclotron resonance heating (ECRH) mainly increases the large scale fluctuations. The radial variation of the fluctuation level is in agreement with simulations using the GENE code. Fast particles are shown to undergo classical slowing down in the absence of large scale magnetohydrodynamic (MHD) events and for low heating power, but show signs of anomalous radial redistribution at large heating power, consistent with a broadened off-axis neutral beam current drive current profile under these conditions. Neoclassical tearing mode (NTM) suppression experiments using electron cyclotron current drive (ECCD) with feedback controlled deposition have allowed to test several control strategies for ITER, including automated control of (3,2) and (2,1) NTMs during a single discharge. Disruption mitigation studies using massive gas injection (MGI) can show an increased fuelling efficiency with high field side injection, but a saturation of the fuelling efficiency is observed at high injected mass as needed for runaway electron suppression. Large locked modes can significantly decrease the fuelling efficiency and increase the asymmetry of radiated power during MGI mitigation. Concerning power exhaust, the partially detached ITER divertor scenario has been demonstrated at P sep /R = 10 MW m − 1 in ASDEX Upgrade, with a peak time averaged target load around 5MWm − 2 , well consistent with the component limits for ITER. Developing this towards DEMO, full detachment was achieved at P sep /R = 7MWm − 1 and stationary discharges with core radiation fraction of the order of DEMO requirements (70% instead of the 30% needed for ITER) were demonstrated. Finally, it remains difficult to establish the standard ITER Q = 10 scenario at low q 95 = 3 in the all-tungsten (all-W) ASDEX Upgrade due to the observed poor confinement at low β N . This is mainly due to a degraded pedestal performance and hence investigations at shifting the operational point to higher β N by lowering the current have been started. At higher q 95 , pedestal performance can be recovered by seeding N 2 as well as CD 4 , which is interpreted as improved pedestal stability due to the decrease of bootstrap current with increasing Z eff . Concerning advanced scenarios, the upgrade of ECRH power has allowed experiments with central ctr-ECCD to modify the q -profile in improved H-mode scenarios, showing an increase in confinement at still good MHD stability with flat elevated q -profiles at values between 1.5 and 2.European Commission (EUROfusion 633053

Deep into the Water Fountains: The case of IRAS 18043-2116

(Abridged) The formation of large-scale (hundreds to few thousands of AU) bipolar structures in the circumstellar envelopes (CSEs) of post-Asymptotic Giant Branch (post-AGB) stars is poorly understood. The shape of these structures, traced by emission from fast molecular outflows, suggests that the dynamics at the innermost regions of these CSEs does not depend only on the energy of the radiation field of the central star. Deep into the Water Fountains is an observational project based on the results of programs carried out with three telescope facilities: The Karl G. Jansky Very Large Array (JVLA), The Australia Telescope Compact Array (ATCA), and the Very Large Telescope (SINFONI-VLT). Here we report the results of the observations towards the WF nebula IRAS 18043$-$2116: Detection of radio continuum emission in the frequency range 1.5GHz - 8.0GHz; H$_{2}$O maser spectral features and radio continuum emission detected at 22GHz, and H$_{2}$ ro-vibrational emission lines detected at the near infrared. The high-velocity H$_{2}$O maser spectral features, and the shock-excited H$_{2}$ emission detected could be produced in molecular layers which are swept up as a consequence of the propagation of a jet-driven wind. Using the derived H$_{2}$ column density, we estimated a molecular mass-loss rate of the order of $10^{-9}$M$_{\odot}$yr$^{-1}$. On the other hand, if the radio continuum flux detected is generated as a consequence of the propagation of a thermal radio jet, the mass-loss rate associated to the outflowing ionized material is of the order of 10$^{-5}$M$_{\odot}$yr$^{-1}$. The presence of a rotating disk could be a plausible explanation for the mass-loss rates estimated.Comment: 10 pages, 5 figures. Accepted for publication in A&

Overview of ASDEX Upgrade results

The ASDEX Upgrade (AUG) programme is directed towards physics input to critical elements of the ITER design and the preparation of ITER operation, as well as addressing physics issues for a future DEMO design. Since 2015, AUG is equipped with a new pair of 3-strap ICRF antennas, which were designed for a reduction of tungsten release during ICRF operation. As predicted, a factor two reduction on the ICRF-induced W plasma content could be achieved by the reduction of the sheath voltage at the antenna limiters via the compensation of the image currents of the central and side straps in the antenna frame. There are two main operational scenario lines in AUG. Experiments with low collisionality, which comprise current drive, ELM mitigation/suppression and fast ion physics, are mainly done with freshly boronized walls to reduce the tungsten influx at these high edge temperature conditions. Full ELM suppression and non-inductive operation up to a plasma current of Ip = 0.8 MA could be obtained at low plasma density. Plasma exhaust is studied under conditions of high neutral divertor pressure and separatrix electron density, where a fresh boronization is not required. Substantial progress could be achieved for the understanding of the confinement degradation by strong D puffing and the improvement with nitrogen or carbon seeding. Inward/outward shifts of the electron density profile relative to the temperature profile effect the edge stability via the pressure profile changes and lead to improved/decreased pedestal performance. Seeding and D gas puffing are found to effect the core fueling via changes in a region of high density on the high field side (HFSHD). The integration of all above mentioned operational scenarios will be feasible and naturally obtained in a large device where the edge is more opaque for neutrals and higher plasma temperatures provide a lower collisionality. The combination of exhaust control with pellet fueling has been successfully demonstrated. High divertor enrichment values of nitrogen EN 10 have been obtained during pellet injection, which is a prerequisite for the simultaneous achievement of good core plasma purity and high divertor radiation levels. Impurity accumulation observed in the all-metal AUG device caused by the strong neoclassical inward transport of tungsten in the pedestal is expected to be relieved by the higher neoclassical temperature screening in larger devices.European Commission (EUROfusion 633053

Evolution of the spherical cavity radius generated around a subsurface drip emitter

The emitter discharge in subsurface drip irrigation can be affected by soil properties. A positive pressure develops at the emitter outlet where a spherical cavity is assumed to form. In steady-state conditions, the pressure in the soil relates to soil hydraulic properties, the emitter discharge, and the cavity radius. This pressure in the soil is very sensitive to the cavity radius. In this paper, the development of the cavity around the emitter outlet was measured for various emitter discharges in laboratory tests carried out in containers with uniform loamy soils. A trend between soil pressure and emitter discharge was established that illustrates the performance of buried emitters in the field. Its application to the prediction of water distribution in subsurface drip irrigation units and its effect on the estimation of irrigation performance are also shown

Presentación

Emotions are a topic of growing philosophical interest. They are complex experiences with multiple effects in the human being. Such complexity demands a variety of balanced and adequate perspectives, and above all, a correct ordering of these perspectives. Phenomenology sheds light on this order via its description of emotional experiences

Horizontal target strength-size conversion equations for sea bass and gilt-head bream

[EN] Horizontal hydroacoustics is a technique of remote fish detection that has proved to efficiently determine fish density and biomass in shallow or superficial waters. This non-intrusive technique could render better results than those obtained by conventional sampling when monitoring shallow waters. To apply this technique, we need equations that relate the amount of sound returned by fish, known as target strength (TS in dB), with their length (mm) or weight (g). This study presents horizontal conversion equations for the species gilt-head bream (Sparus aurata) and sea bass (Dicentrarchus labrax), two of the most important species bred in aquaculture. Moreover, this study presents a new formula to calculate a mixed equation adjusted to the percentage of distribution of those species in case of mixed populations. The results in this research have been obtained by applying a simple setup that allows for high-quality acoustic data. These new equations will enable the application of this technique in order to estimate these species' density and biomass in shallow aquatic systems such as aquaculture ponds with semi-intensive production densities.This study's authors would like to thank the Superintendent of Economy and Knowledge (Andalusian Government) for the funding provided as part of the project (PI_57052) developed in collaboration with CTAQUA. We would like to thank the researchers Carlos Orduna Marin and Juan Ramon Cid Quintero for their selfless work to obtain the field data and to the company PIMSA for generously allowing us to use their facilities and fish. We would also like to thank the veterinarian JR Rodriguez for being kind enough to perform X-rays on the studied fish and Cristina Ocana for her careful proofreading of the English text.Rodríguez-Sánchez, V.; Rodríguez-Ruiz, A.; Pérez Arjona, I.; Encina-Encina, L. (2018). Horizontal target strength-size conversion equations for sea bass and gilt-head bream. Aquaculture. 490:178-184. https://doi.org/10.1016/j.aquaculture.2018.02.034S17818449

Use of Diethanolamine to Obain Cellulosics Pulps from Solid Fraction of Hydrothermal Treatment of Rice Straw

We assessed the potential of the solid residue from ahydrothermal treatment of rice straw as an alternative raw material for obtaining cellulose pulp. To this end, we examined the influence of operational variables in the diethanolamine pulping of this material on the properties of the cellulose pulp obtained and of paper sheets made from it.Using a central composite factor design and fitting the results to a polynomial model allowed us to establish equations relating the dependent variables to the independent ones with errors less than 8% in all cases except for burst index (27%).The optimum conditions with a view to saving reagents, heating energy and immobilized capital were found to be a diethanolamine concentration of 70%, a temperature of 162.5 ºC, a cooking time of 60 min and a liquid/solid ratio of 8. These conditions provide paper sheets with physical properties that depart by less than 8% from their optimum values, and a pulp yield and Kappa number differing by less than 14% from their best levels.We compared the results obtained in the diethanolaminepulping of the solid fraction from the hydrothermal treatmentof rice straw with those for kraft and diethanolaminepulp from eucalyptus and pine wood, and found the propertiesof the former to fall in between those for the latter two

Fission program at n_TOF

Since its start in 2001 the n_TOF collaboration developed a measurement program on fission, in view of advanced fuels in new generation reactors. A special effort was made on measurement of cross sections of actinides, exploiting the peculiarity of the n_TOF neutron beam which spans a huge energy domain, from the thermal region up to GeV. Moreover fission fragment angular distributions have also been measured. An overview of the cross section results achieved with different detectors is presented, including a discussion of the 237Np case where discrepancies showed up between different detector systems. The results on the anisotropy of the fission fragments and its implication on the mechanism of neutron absorption, and in applications, are also shown

Integrated spectra extraction based on signal-to-noise optimization using Integral Field Spectroscopy

We propose and explore the potential of a method to extract high signal-to-noise (S/N) integrated spectra related to physical and/or morphological regions on a 2-dimensional field using Integral Field Spectroscopy (IFS) observations by employing an optimization procedure based on either continuum (stellar) or line (nebular) emission features. The optimization method is applied to a set of IFS VLT-VIMOS observations of (U)LIRG galaxies, describing the advantages of the optimization by comparing the results with a fixed-aperture, single spectrum case, and by implementing some statistical tests. We demonstrate that the S/N of the IFS optimized integrated spectra is significantly enhanced when compared with the single aperture unprocessed case. We provide an iterative user-friendly and versatile IDL algorithm that allows the user to spatially integrate spectra following more standard procedures. This is made available to the community as part of the PINGSoft IFS software package.Comment: Accepted for publication in Astronomy & Astrophysics, 12 pages, 7 figure