15 research outputs found

    Observation of a new D_sJ meson in B+->D0BD0K+ decays

    Full text link
    We report the observation of a new DsJD_{sJ} meson produced in B+Dˉ0DsJDˉ0D0K+B^{+} \to \bar{D}^{0} D_{sJ} \to \bar{D}^{0} D^{0} K^{+}. This state has a mass of M=2708±910+11MeV/c2M=2708 \pm 9 ^{+11}_{-10} \rm{MeV}/{\it c}^{2}, a width Γ=108±2331+36 MeV/c2\Gamma = 108 \pm 23 ^{+36}_{-31} ~\rm{MeV}/ {\it c}^{2} and a 11^{-} spin-parity. The results are based on an analysis of 449 million BBˉB\bar{B} events collected at the Υ(4S)\Upsilon(4S) resonance with the Belle detector at the KEKB asymmetric-energy e+ee^{+} e^{-} collider.Comment: submitted to Phys. Rev. Let

    Mineralogical-gemological and microthermometric studies of spodumenes from the Nilaw mine (Laghman Province, NE Afghanistan)

    No full text
    The aim of the study was mineralogical-gemological and microthermometric analysis of color types of spodumenes (green spodumenes, kunzite) from the Nilaw mine (Laghman Province, Afghanistan). These minerals contain numerous fluid inclusions, both primary and secondary, as well as mineral ones. The analyses of fluid inclusion assemblages (FIA) in green spodumenes showed of temperatures of homogenization (into vapor phase) of carbon dioxide (ThCO2) varing from 27.1 to 27.8°C and total homogenization temperatures (ThTOT) of 252–271°C. Temperature of crystallization after correction varies from 370 to 430°C and pressure - from 1.16 to 1.44 kbar. Composition of brines (in mol%): H2O = 0.93–0.94, CO2 = 0.027–0.038, NaCl = 0.029-0.032, with salinities from 4.33 to 6.59 wt.% NaCl eq. was also calculated. For FIAs in kunzite, temperatures of homogenization of carbon dioxide (ThCO2) range from 27.0 to27.3°C, whereas total temperatures of homogenization (ThTOT) is 238–250°C. Values of Tcr are 300–334°C and Pcr - 0.81–1.12 kbar. Composition of brines (in mol%) is: H2O = 0.57–0.75, CO2 = 0.22–0.40, NaCl ca 0.02; and salinity 4.5–5.7 wt. % NaCl eq. The obtained results show that the studied minerals precipitated from medium-temperature and low-pressure hydrothermal solutions varying in chemical composition. New Polish terminology for English equivalents regarding petrography of fluid inclusions was also proposed

    Mineralogical and petrographic characteristic of Brown Zuber deposits (Na3t) from the borehole M-34 of the Mogilno Salt Dome

    No full text
    W profilu ewaporatów cechsztyńskich na Niżu Polskim utwory zubrowe występują w stropowej partii cyklotemu PZ3 (zuber Na3t) i w środkowej partii cyklotemu PZ4 (zuber Na4t) (Czapowski i in. 2008), gdzie w naturalnej, nie zaburzonej sekwencji tworzą kompleks skał iłowo-solnych o łącznej miąższości około 320–400 m (Wagner, 1994). W wysadach solnych, wypiętrzonych w wyniku procesów halokinetycznych z głębokości około 6000 m, miąższość ta jest bardzo zmienna. W wysadzie kłodawskim miąższość skał zubrowych ogniwa zubru brunatnego waha się od 80 do 140 metrów (Charysz, 1973). W profilu otworu badawczego M-34, odwierconego w wysadzie solnym Mogilno, skały zubru brunatnego stwierdzono w dwóch interwałach głębokości: 1063-1100 m oraz 1457- 1468 m (Wachowiak, Pitera, 2013). Są to utwory iłowo-solne o zmiennej proporcji udziału halitu w stosunku do minerałów ilastych. W badanych próbkach zawartość halitu waha się od 78,6% wag. do 88,4% wag. Zawartość części trudno rozpuszczalnych w wodzie zmienia się od 21,4% wag. do 11,6% wag. Nierozpuszczalne w wodzie residuum jest zbudowane z takich minerałów jak: anhydryt, kwarc, magnezyt, dolomit, piryt oraz minerały ilaste (illit, chloryt), które zidentyfikowano na podstawie analizy rentgenograficznej. W składzie chemicznym skał zubru brunatnego dominują jony sodu i chloru, których sumaryczny udział wynosi 79% i 86% wag. Pozostałą masę skały stanowią jony siarczanowe, węglanowe, wapń, magnez, glin, potas, żelazo, krzemionka oraz w minimalnej ilości inne pierwiastki występujące śladowo.Brown Zuber rocks (Na3t) occur in the upper part of the PZ3 cyclothem, creating nearly 80-140 m complex of claysalt rocks in the normal deposit succession of the Zechstein (PZ) evaporite profile of the Polish Lowlands (Charysz, 1973; Czapowski et al., 2008). In the salt domes formed by the halokinetic processes, the thickness of this complex is variable. Brown Zuber rocks were found in two depth intervals: 1063-1100 m and 1457-1468 m (Wachowiak, Pitera, 2013) in the profile of exploratory borehole M-34, drilled in the Mogilno Salt Dome. Those were clay-salt formations with changeable proportions of halite and clay minerals. Halite is the main rock-forming mineral, and the samples analysis demonstrated that its content ranges from 78,6 to 88,4 wt.%. The proportion of poorly water soluble parts varies from 21,4 to 11,6 wt.%. The insoluble residuum is composed of such minerals as: anhydrite, quartz, magnesite, pyrite, and clay minerals (illite and chlorite), identified on the basis of X-ray analysis. Chemical composition of the Brown Zuber rocks is dominated by sodium (Na) and chlorine (Cl). The total proportion of these elements amounted 79 and 86 wt.% by weight. Sulfate ion (SO42-), calcium, magnesium, aluminum, potassium, iron and silica (SiO2) equal the remaining wt.%. as well as a small amount of bromine was detected

    Mineralogical and petrographic characteristics of clastic rocks of the Mts. (Sandomierz Upland) and their weathering cover

    No full text
    Clay shales and mudstones from the Pieprzowe Mts. Shale Formation and their weathering cover were investigated for mineralogy and petrography in order to reconstruct weathering processes that led to crystallization of secondary sulphates. White crusts occurring on Cambrian pyrite-bearing rocks are a product of hypergenic alteration in low pH conditions and Al-rich environment. They are composed of pickeringite [MgAl2(SO4)4*22 H2O] accompanied by alunogen [Al2(SO4)3*17 H2O] and small amounts of epsomite [MgSO4*7H2O]

    Mineralogical and petrologic characteristic of Red Zuber (Na4t) deposits from the borehole M-34 of the Mogilno Salt Dome

    No full text
    Ewaporaty solno-ilaste – zubry osadziły się w górnym permie wraz z innymi skałami solnymi, w osiowej części wschodnio-europejskiego basenu górnopermskiego i są osadami charakterystycznymi dla polskiej prowincji cechsztynu na obszarze środkowej Polski. Wskutek silnej subsydencji skały te zostały pogrzebane na głębokość kilku kilometrów i tam zostały poddane przeobrażeniom diagenetycznym i/ lub metamorficznym. W wyniku tych procesów powstało wiele nowych, towarzyszących halitowi, minerałów epigenetycznych. W badanych skałach zubrowych, oprócz halitu, stwierdzono minerały ilaste, naniesione do cechsztyńskiego zbiornika sedymentacyjnego z otaczającego lądu. Na podstawie analizy rentgenograficznej najdrobniejszej frakcji osadu nierozpuszczalnego w wodzie, stwierdzono występowanie illitu i chlorytu. Illit może być słabo przeobrażonym minerałem pierwotnym, natomiast chloryt jest produktem wtórnych, postsedymentacyjnych przeobrażeń geochemicznych. Wyraźny refleks od płaszczyzny dhkl = 1,54Å wskazuje, że jest to chloryt trioktaedryczny. Oprócz minerałów ilastych, stwierdzono występowanie kwarcu, anhydrytu, magnezytu i hematytu. Minerały te wykształcone są w formie idiomorficznych lub/i subidiomorficznych kryształów. Ich wielkość waha się od setnych części milimetra do 2 mm. W składzie chemicznym soli ilastej, wydzielonej z warstwy zubru czerwonego, wśród oznaczonych pierwiastków zdecydowanie przeważają sód i chlor (ponad 94% wag.). Pozostałe 6% wag. stanowią: siarczany (SO4 2-), wapń, magnez, glin, potas, żelazo oraz w bardzo małej ilości krzemionka (SiO2) i brom.Clayey-salt evaporites, called zubers, were deposited in the axial part of the Eastern European Zechstein (Upper Permian) basin . Zubers are the most characteristic rocks for the Polish province of Zechstein on the Polish Lowlands. As a result of strong subsidence, the rocks were buried down to the depth of several kilometers and afterwards subjected to diagenetic and metamorphic transformations. Consequently, many epigenetic minerals have developed in the presence of halite such as: anhydrite, quartz, magnezite and hematite. These minerals were developing mostly in the form of idiomorphic and/or sub-idiomorphic crystals from hundredths parts of millimeter up to 2 mm in size. In addition to halite, the main component found in zuber’s rock was a clay matter, delivered into the Zechstein basin from the surrounding land. Based on the X-ray analysis of the finest water insoluble fractions, two clay minerals were identified: illite and chlorite. Illite could be a poorly transformed primary mineral, while chlorite is a secondary one, produced during post-sedimentation geochemical transformations. A clear reflex dhkl = 1.54Å indicates that it is a trioctaedral chlorite. In addition to clay minerals, the finest fraction also includes quartz, anhydrite, magnezite and hematite. The chemical composition of clay salt, a component of the Red Zuber (Na4t) unit, is strongly dominated by sodium and chlorine among the identified elements (over 94 weight%). The remaining ca. 6 weight% includes: sulfates (SO4 2-), calcium, magnesium, aluminum, potassium, iron and a small amount of silica (SiO2) and bromo

    Miocene mineralized wood fragments in deposits of the Carpathian Foredeep between Tarnów and Dębica

    No full text
    Opisano efekty mineralizacji fragmentów mioceńskich drzew występujących w utworach zapadliska przedkarpackiego, wśród których dominują przedstawiciele drzew iglastych.The mineralized wood fragments from the Miocene deposits of the Carpathian Foredeep are described, which are dominated by conifer ones

    Rodingite from Nasławice (Jordanów-Gogołów massif) against the other occurrences of these rocks in Lower Silesia (SW Poland)

    No full text
    Rodingites from Nasławice of the Jordanów-Gogołów serpentinite massif in SW Poland are mainly made of augite/diopside, grossular and hornblende/tremolite. The accessory components are represented by vesuvianite, adularia, basaltic hornblende and picotite. Apatite, millerite?, sphalerite, galena, Fe-sulphides, Ni-sulphides and Ni-arsenates were also observed as a trace phases in these rocks. Generally rodingites from Nasławice are enriched in numerous polymetallic compounds of Cu, Ag, Fe, Ni, Co, Fe, Pb, Zn, As and Bi and show similar mineral association and texture as rodingites from the other occurrences in SW Poland, i.e. from Szklary and Braszowice-Brzeźnica massives. They were the most probably developed from mafic protholit (diabase gabbro) intruding into serpentinized ultramafic rocks under metasomatism conditions. The secondary pneumo-hydrothermal post-granitic activities also affected the final formation of these metasomatic rocks

    Preliminary mineralogical and petrographical studies of veins within the country rocks of the Neogene volcanites of the Pieniny Klippen Belt as indicators of potential geothermal processes

    No full text
    Field and as mineralogical and petrographical examinations of sedimentary rocks present in the area surrounding the Pieniny Klippen Belt were performed. The aim of these investigations was to identify the symptoms of hydrothermal processes within the studied rocks. Moreover, the areas prospective for the occur- rences of geothermal waters, alternative source of thermal energy instead of traditional power production using fossil fuels, were indicated. Analytical investigations were focused mainly on mineralogical composition of rocks as well as on the frequency of occurrences of various veins (mainly built of carbonate minerals) intersecting the rocks from the neighbourhood of Neogene andesitic rocks from the Pieniny Klippen Belt. The highest quantity and thickness of the veins was observed in the rocks from the area of Piekiełko stream near Krościenko. The clastic rocks (sandstones) from this area contain many fractures which are crucial for potential geothermal water circulation

    Mineralogical and petrographical characteristics of hornfels from Kowary (the Lower Silesia)

    No full text
    Hornfelsy pochodzące z wyrobisk dawnej kopalni „Wolność” w Kowarach na Dolnym Śląsku są to skały wchodzące w skład formacji rudonośnej z Podgórza. Struktura ta znajduje się na styku granitoidowego masywu Karkonoszy oraz jego wschodniej osłony metamorficznej. Zmienność składu mineralnego badanych hornfelsów, a także ich cech strukturalno-teksturalnych były podstawą wydzielenia odmian barwnych tych skał, tj. czarnej, szarej i zielonej. Każda z nich występuje niezależnie, bądź też wzajemnie się przeławicają, dając odmiany mieszane o teksturach laminowanych lub smużystych. Na podstawie składu mineralnego stwierdzono, że hornfelsy z Kowar należą do facji piroksenowo-hornfelsowej metamorfizmu kontaktowego, dla której charakterystyczny jest następujący zespół mineralny: pirokseny, plagioklazy i kwarc; muskowit jest zastępowany ortoklazem, a biotyt pozostaje stabilny. Typowym minerałem tej facji jest andaluzyt, choć niekiedy może występować również sillimanit. W skałach tych wyróżniono przynajmniej trzy generacje faz mineralnych: I – allogeniczną, II – metamorficzną i III – hydrotermalną. [...]Hornfels from the closed “Wolność” mine (Kowary, the Lower Silesia) are recognized as thermally metamorphosed rocks belonging to hornblende-hornfels facies or locally a facies of pyroxene hornfels. Their texture reveal the traces of some deformations such as folding or fractures. Their protholit is described as a pelitic deposit enriched with clay minerals. The sediment was altered into meta-pelities-aleurites after the diagenesis, and later the rock was intensely thermally metamorphosed at the contact with the intrusion of the Karkonosze granitoid. Three varieties are distinguished based on their colour: green, grey and black. Green and black colours result from the predominance of hornblende and biotite over other rock components, respectively. Whereas grey hornfels are composed of similar amounts of both mafic minerals: biotite and hornblende. Quartz, mica minerals (biotite and muscovite), amphibole, (hornblende), acid plagioclase and andalusite, epidote group (clinozoisite), orthoclase and pyroxene make up hornfels components. Locally, andalusite is accompanied by sillimianite, which indicates a higher degree of contact metamorphism alterations. Three generations of minerals are distinguished in the rocks: allogenic (I), metamorphic (II ) and hydrothermal (III ). The allogenic phases are represented by heavy minerals such as zircon, apatite and monazite, which are characteristic of the protholit. The main components of the rocks (e.g. quartz, hornblende, feldspars, andalusite, sillimanite, mica minerals) belong to metamorphic minerals. Chalcopyrite, pyrite and fluorite are surely hydrothermally originated phases. Granitoides found at the contact zone with hornfels indicate traces of metasomatic alteration as a result of endomorphism in this region

    Mineralogical and Petrographical Characteristics of Hornfels from Kowary (The Lower Silesia)

    No full text
    Hornfelsy pochodzące z wyrobisk dawnej kopalni „Wolność” w Kowarach na Dolnym Śląsku są to skały wchodzące w skład formacji rudonośnej z Podgórza. Struktura ta znajduje się na styku granitoidowego masywu Karkonoszy oraz jego wschodniej osłony metamorficznej. Zmienność składu mineralnego badanych hornfelsów, a także ich cech strukturalno-teksturalnych były podstawą wydzielenia odmian barwnych tych skał, tj. czarnej, szarej i zielonej. Każda z nich występuje niezależnie, bądź też wzajemnie się przeławicają, dając odmiany mieszane o teksturach laminowanych lub smużystych. Na podstawie składu mineralnego stwierdzono, że hornfelsy z Kowar należą do facji piroksenowo-hornfelsowej metamorfizmu kontaktowego, dla której charakterystyczny jest następujący zespół mineralny: pirokseny, plagioklazy i kwarc; muskowit jest zastępowany ortoklazem, a biotyt pozostaje stabilny. Typowym minerałem tej facji jest andaluzyt, choć niekiedy może występować również sillimanit. W skałach tych wyróżniono przynajmniej trzy generacje faz mineralnych: I – allogeniczną, II – metamorficzną i III – hydrotermalną. [...]Hornfels from the closed “Wolność” mine (Kowary, the Lower Silesia) are recognized as thermally metamorphosed rocks belonging to hornblende-hornfels facies or locally a facies of pyroxene hornfels. Their texture reveal the traces of some deformations such as folding or fractures. Their protholit is described as a pelitic deposit enriched with clay minerals. The sediment was altered into meta-pelities-aleurites after the diagenesis, and later the rock was intensely thermally metamorphosed at the contact with the intrusion of the Karkonosze granitoid. Three varieties are distinguished based on their colour: green, grey and black. Green and black colours result from the predominance of hornblende and biotite over other rock components, respectively. Whereas grey hornfels are composed of similar amounts of both mafic minerals: biotite and hornblende. Quartz, mica minerals (biotite and muscovite), amphibole, (hornblende), acid plagioclase and andalusite, epidote group (clinozoisite), orthoclase and pyroxene make up hornfels components. Locally, andalusite is accompanied by sillimianite, which indicates a higher degree of contact metamorphism alterations. Three generations of minerals are distinguished in the rocks: allogenic (I), metamorphic (II ) and hydrothermal (III ). The allogenic phases are represented by heavy minerals such as zircon, apatite and monazite, which are characteristic of the protholit. The main components of the rocks (e.g. quartz, hornblende, feldspars, andalusite, sillimanite, mica minerals) belong to metamorphic minerals. Chalcopyrite, pyrite and fluorite are surely hydrothermally originated phases. Granitoides found at the contact zone with hornfels indicate traces of metasomatic alteration as a result of endomorphism in this region
    corecore