Obesity and nocturnal gastro-oesophageal reflux are related to onset of asthma and respiratory symptoms

Several studies have identified obesity as a risk factor for asthma in both children and adults. An increased prevalence of asthma in subjects with gastro-oesophageal reflux (GOR) and obstructive sleep apnoea syndrome has also been reported. The aim of this investigation was to study obesity, nocturnal GOR and snoring as independent risk factors for onset of asthma and respiratory symptoms in a Nordic population. In a 5-10 yr follow-up study of the European Community Respiratory Health Survey in Iceland, Norway, Denmark, Sweden and Estonia, a postal questionnaire was sent to previous respondents. A total of 16,191 participants responded to the questionnaire. Reported onset of asthma, wheeze and night-time symptoms as well as nocturnal GOR and habitual snoring increased in prevalence along with the increase in body mass index (BMI). After adjusting for nocturnal GOR, habitual snoring and other confounders, obesity (BMI >30) remained significantly related to the onset of asthma, wheeze and night-time symptoms. Nocturnal GOR was independently related to the onset of asthma and in addition, both nocturnal GOR and habitual snoring were independently related to onset of wheeze and night-time symptoms. This study adds evidence to an independent relationship between obesity, nocturnal gastro-oesophageal reflux and habitual snoring and the onset of asthma and respiratory symptoms in adults

Exposure of bakery and pastry apprentices to airborne flour dust using PM2.5 and PM10 personal samplers

<p>Abstract</p> <p>Background</p> <p>This study describes exposure levels of bakery and pastry apprentices to flour dust, a known risk factor of occupational asthma.</p> <p>Methods</p> <p>Questionnaires on work activity were completed by 286 students. Among them, 34 performed a series of two personal exposure measurements using a PM_2.5and PM₁₀personal sampler during a complete work shift, one during a cold ("winter") period, and the other during a hot ("summer") period.</p> <p>Results</p> <p>Bakery apprentices experience greater average PM_2.5and PM₁₀exposures than pastry apprentices (p < 0.006). Exposure values for both particulate fractions are greater in winter (average PM₁₀values among bakers = 1.10 mg.m^-3[standard deviation: 0.83]) than in summer (0.63 mg.m^-3[0.36]). While complying with current European occupational limit values, these exposures exceed the ACGIH recommendations set to prevent sensitization to flour dust (0.5 mg.m^-3). Over half the facilities had no ventilation system.</p> <p>Conclusion</p> <p>Young bakery apprentices incur substantial exposure to known airways allergens, a situation that might elicit early induction of airways inflammation.</p

Exposure-response relations for self reported asthma and rhinitis in bakers

OBJECTIVES—To explore relations between two estimates of exposure to inhalable flour dust, and the incidence rates (IRs) of asthma and rhinitis in bakers.
METHODS—This was a retrospective cohort study among 2923 bakers. A posted questionnaire registered the disease and work history. For every year, each baker was assigned an estimate of the exposure concentration to inhalable flour dust derived from reported job-tasks and dust measurements. Exposure at onset of disease was expressed as current dust exposure concentration, and as cumulative dose of exposure to dust. A multiple Poisson regression analysis assessed the impacts of the exposure estimates on the IRs of asthma and rhinitis.
RESULTS—IRs of asthma and rhinitis increased by dust concentration at onset of disease. The IR of asthma for the bakers with highest exposure (dough makers) was 7.3/1000 person-years in men and 6.5( )in women and for rhinitis 43.4 and 38.5, respectively. There was a significant association between the dust concentration at onset of disease and the risk for asthma or rhinitis, but not of the cumulative exposure.
CONCLUSION—The risk of asthma seemed to be increased at inhalable dust concentrations ⩾3 mg/m(3) (dough making or bread forming), whereas the risk of rhinitis was increased at all concentrations ⩾1 mg/m(3), indicating an increased risk in all bakery job-tasks. The risks seemed to be less dependent on the cumulative exposure dust than the inhalable dust concentrations.


Keywords: bakers; exposure-response relations; flour dus

Exposure to Metalworking Fluid Aerosols and Determinants of Exposure

Metalworking fluid (MWF) aerosols are associated with respiratory disorders including asthma and hypersensitivity pneumonitis. The aims of this study were to describe exposure to inhalable MWF aerosols and volatile compounds in machine shops, to estimate the influence of important determinants of exposure and to compare different sampling techniques for MWF aerosols. Personal full-shift air samples of inhalable aerosol (PAS-6 sampler) and total aerosol (open-faced sampler) were collected on operators in five medium to big-sized machine shops in three companies. The filters were analysed gravimetrically and extracted by supercritical fluid extraction for MWF aerosol and triethanolamine content. In addition, personal measurements were taken for formaldehyde and volatile compounds on adsorbent samplers. Continuous dust measurements were performed with a real-time instrument (DataRAM) during 2 h periods, using 1-min average values. In total, 95 measurements of inhalable aerosol and extracted MWF aerosols on 51 operators were conducted. Within the companies, the average exposure to inhalable aerosol ranged from 0.19 to 0.25 mg m(-3) with geometric standard deviations from 1.56 to 1.79. On average, the extracted fraction of MWF aerosol was 67% of the inhalable aerosol concentration. The exposure levels of triethanolamine, formaldehyde and volatile compounds were generally low. About 45% of the between-worker variance could be explained by use of compressed air, lack of complete enclosure of machines or grinding as cutting task. In 21 workers with continuous aerosol measurements, short-term peak exposures during 6% of the work time contributed to similar to 25% of the average concentration of inhalable MWF aerosol. Inhalable MWF aerosol concentration measured with the PAS-6 sampler was a factor 2 higher than the concentrations derived from the open-faced sampler. These findings suggest that control measures, such as full enclosure of machines and the elimination of the use of compressed air as cleaning technique, are required to reduce the exposure to MWF aerosols to levels below the expected threshold for adverse respiratory health effects

Exposure to Metalworking Fluid Aerosols and Determinants of Exposure

Metalworking fluid (MWF) aerosols are associated with respiratory disorders including asthma and hypersensitivity pneumonitis. The aims of this study were to describe exposure to inhalable MWF aerosols and volatile compounds in machine shops, to estimate the influence of important determinants of exposure and to compare different sampling techniques for MWF aerosols. Personal full-shift air samples of inhalable aerosol (PAS-6 sampler) and total aerosol (open-faced sampler) were collected on operators in five medium to big-sized machine shops in three companies. The filters were analysed gravimetrically and extracted by supercritical fluid extraction for MWF aerosol and triethanolamine content. In addition, personal measurements were taken for formaldehyde and volatile compounds on adsorbent samplers. Continuous dust measurements were performed with a real-time instrument (DataRAM) during 2 h periods, using 1-min average values. In total, 95 measurements of inhalable aerosol and extracted MWF aerosols on 51 operators were conducted. Within the companies, the average exposure to inhalable aerosol ranged from 0.19 to 0.25 mg m(-3) with geometric standard deviations from 1.56 to 1.79. On average, the extracted fraction of MWF aerosol was 67% of the inhalable aerosol concentration. The exposure levels of triethanolamine, formaldehyde and volatile compounds were generally low. About 45% of the between-worker variance could be explained by use of compressed air, lack of complete enclosure of machines or grinding as cutting task. In 21 workers with continuous aerosol measurements, short-term peak exposures during 6% of the work time contributed to similar to 25% of the average concentration of inhalable MWF aerosol. Inhalable MWF aerosol concentration measured with the PAS-6 sampler was a factor 2 higher than the concentrations derived from the open-faced sampler. These findings suggest that control measures, such as full enclosure of machines and the elimination of the use of compressed air as cleaning technique, are required to reduce the exposure to MWF aerosols to levels below the expected threshold for adverse respiratory health effects

Time to pregnancy among partners of men exposed to di(2-ethylhexyl)phthalate

Objectives This study assessed paternal occupational exposure to di(2-ethylhexyl)phthalate (DEHP) in association with reduced fertility. Methods Men working in three plants with DEHP exposure were studied retrospectively. Male and female employees and their partners were invited to participate if they had reported a pregnancy or an attempt to achieve a pregnancy. Postal questionnaires and telephone interviews were used to collect additional data from the men and women, respectively. Information on time to pregnancy was eligible for 326 pregnancies fathered by 193 men. Male exposure to DEHP during every month of their time to pregnancy was classified into one of three exposure categories. The exposure ranged from 0.5 mg/m(3) during the time to pregnancy. The pregnancies of employed women with unexposed partners or pregnancies of employed men unexposed during the time to pregnancy formed the reference group. Results The fecundability ratio for time to pregnancy was 1.07 [95% confidence interval (95% Cl) 0.84-1.351 for those with low exposure and 0.97 (95% CI 0.70-1.33) for the highly exposed after adjustment for the father's age, mother's age, and length of recall. When the analyses were restricted to first pregnancy, the fecundability ratio was 1.13 (95% Cl 0.83-1.56) for low exposure and 1.02 (95% Cl 0.66-1.59) for high exposure. Conclusions Time to pregnancy is not prolonged among couples with paternal exposure to DEHP at a mean exposure level of <0.5 mg/ml