Summary of Butler v. State, 120 Nev. Adv. Op. 93

Defendant appealed his conviction on two counts of first-degree murder with the use of a deadly weapon, for which he received a sentence of death

Simulating the sintering of powder particles during the preheating step of Electron Beam Melting process: Review, challenges and a proposal

The powder bed preheating before melting is a distinctive manufacturing step of the Electron Beam Melting (EBM) process. During preheating slight sintering occurs and small necks are formed between neighbouring particles. The necks improve the heat transfer and the powder bed strength allowing a reduction of supports structures and the neutralisation of the so-called smoke. However, preheating may represent over 50% of the total production time. This work investigates the major strategies in literature for preheating phase optimisation and proposes a numerical simulation approach to evaluate the neck growth and the corresponding sintering level

Isolamento e crescimento de Leishmania (Leishmania) infantum chagasi em meio de crescimento condicionado de cultura celular

Leishmanias can be produced by inoculation in conditioned McCoy cell culture growth medium (CGM). Leishmania (Leishmania) infantum chagasi (100 parasites) grown in NNN medium was inoculated in 2.5 mL CGM, kept in plates (24 wells) and its multiplication was observed for five days (120 hours). After day 5, the medium was saturated with the flagellate forms of the parasite (promastigotes). The reproduction of the leishmanias was observed every 24 hours and the number of parasites was calculated by counting the parasites in a drop of 10 µ L and photomicrographied. So the number of Leishmanias was adjusted to 1 mL volume. The advantage of the technique by isolation of Leishmania in CGM demonstrated in this study is its low cost and high efficacy even with a small quantity of parasites (10² promastigotes) used as inoculum. Additionally, isolation of the leishmania can be obtained together with an increase in their density (180 times) as observed by growth kinetics, within a shorter time. These results justify the use of this low-cost technique for the isolation and investigation of the behavior and multiplication of Leishmania both in vertebrates and invertebrates, besides offering means of obtaining antigens, whether whole antigens (leishmanias) or the soluble antigens produced by the parasites which may be useful for the production of new diagnostic kits.Leishmânias podem ser produzidas em meio de crescimento condicionado, após o cultivo de células McCoy (MCC). Promastigotas crescidas em meio semi-sólido NNN foram inoculadas em MCC, inicialmente, 100 parasitos por poço com 2,5 mL de McCoyMCC, em placas com 24 poços, sua multiplicação foi observada por uma cinética de 120 horas. Após este tempo, o meio estava saturado de promastigotas. A reprodução das leishmânias foi acompanhada a cada 24 horas, com contagem do número de parasitos por campo fotomicrografado. Como vantagem da técnica do crescimento da leishmânia em MCC tem-se o seu baixo custo, com pequena quantidade de parasitos pode-se obter o aumento da densidade de promastigotas em tempo reduzido. Com o emprego dessa técnica pode-se estudar o comportamento e a multiplicação das leishmânias nos vertebrados e invertebrados, assim como, obter antígenos, tanto brutos (leishmânia) como solúveis, produzidos pelos parasitos, que poderão ser úteis para se desenvolver kits de diagnósticos

Prognostic significance of primary-tumor extension, stage and grade of nuclear differentiation in patients with renal cell carcinoma

Surgery remains the preferred therapy for renal cell carcinoma. The various adjunctive or complementary therapies currently yield disappointing results. Identifying reliable prognostic factors could help in selecting patients most likely to benefit from postoperative adjuvant therapies. We reviewed the surgical records of 78 patients who had undergone radical nephrectomy with lymphadenectomy for renal cell carcinoma, matched for type of operation and histology. According to staging (TNM), 5.1% of the patients were classified as stage I, 51.3% as stage II, 29.5% as stage III and 14.5% as stage IV. Of the 78 patients 40 were T2N0 and 21 T3aN0. Tumor grading showed that 39.7% of the patients had well-differentiated tumors(G1), 41.1% moderately-differentiated (G2), and 19.2% poorly-differentiated tumors (G3). Overall actuarial survival at 5 and 10 years was 100% for stage 1; 91.3% at 5 years and 83.1% at 10 years for stage II; 45.5% and 34.1% for stage III; and 29.1% and nil for stage IV (stage II vs stage III p = 0.0001). Patients with tumors confined to the kidney (pT2N0) had better 5- and 10-year survival rates than patients with tumors infiltrating the perirenal fat (pT3aN0) (p = 0.000006). Survival differed according to nuclear grading (G1 vs G3 ; p = 0.000005; G2 vs G3; p = 0.0009). In conclusion our review identified tumor stage, primary-tumor extension, and the grade of nuclear differentiation as reliable prognostic factors in patients with renal cell carcinomas

The virtuous cycle of stakeholder engagement in developing a sustainability culture: Salcheto winery

Stakeholder engagement in sustainability represents a powerful driver for value creation. Drawing from stakeholder theory, this paper explores how a firm with a proactive sustainable behaviour engages stakeholders in developing innovation and creating value. A longitudinal, single case study of the Salcheto winery was carried out. Since the late 1990s, Salcheto has been at the forefront of wine eco-innovation and it has played a key role in the development of Montepulciano (Tuscany, Italy) as one of the first sustainable wine clusters worldwide. The development of a sustainable wine culture is one of the firm's various innovations. In doing so, the firm has had to face three challenges - identity creation, legitimization and enhancement - and has engaged its stakeholders through three specific mechanisms (adoption and development; co-creation and diffusion; exploitation and contamination). This virtuous cycle of stakeholder engagement has resulted in value creation at a firm, stakeholder and local level

A bird's eye view on the role of dendritic cells in SARS-CoV-2 infection: Perspectives for immune-based vaccines

Coronavirus disease-19 (COVID-19) is a complex disorder caused by the pandemic diffusion of a novel coronavirus named SARS-CoV-2. Clinical manifestations vary from silent infection to severe pneumonia, disseminated thrombosis, multi-organ failure, and death. COVID-19 pathogenesis is still not fully elucidated, while increasing evidence suggests that disease phenotypes are strongly related to the virus-induced immune system's dysregulation. Indeed, when the virus-host cross talk is out of control, the occurrence of an aberrant systemic inflammatory reaction, named “cytokine storm,” leads to a detrimental impairment of the adaptive immune response. Dendritic cells (DCs) are the most potent antigen-presenting cells able to support innate immune and promote adaptive responses. Besides, DCs play a key role in the anti-viral defense. The aim of this review is to focus on DC involvement in SARS-CoV-2 infection to better understand pathogenesis and clinical behavior of COVID-19 and explore potential implications for immune-based therapy strategies

Effect of the Sintering Conditions on the Neck Growth during the Powder Bed Fusion with Electron Beam (PBF-EB) Process

A distinctive characteristic of the powder bed fusion with electron beam (PBF-EB) process is the sintering of the powder particles. For certain metallic materials, this is crucial for the success of the subsequent step, the melting, and, generally, the whole process. Despite the sintering mechanisms that occur during the PBF-EB process being similar to well-known powder metallurgy, the neck growth rates are significantly different. Therefore, specific analyses are needed to understand the influence of the PBF-EB process conditions on neck growth and neck growth rate. Additionally, some aspects, such as the rigid body motion of the particles during the sintering process, are still challenging to analyze. This work systematically investigated the effects of different particle diameters and particle diameter ratios. Additionally, the impact of the rigid body motion of the particles in the sintering was analyzed. This work demonstrated that the sintering results significantly depended on the EB-PBF process conditions

Dendritic Cells Are the Intriguing Players in the Puzzle of Idiopathic Pulmonary Fibrosis Pathogenesis

Idiopathic pulmonary fibrosis (IPF) is the most devastating progressive interstitial lung disease that remains refractory to treatment. Pathogenesis of IPF relies on the aberrant cross-talk between injured alveolar cells and myofibroblasts, which ultimately leads to an aberrant fibrous reaction. The contribution of the immune system to IPF remains not fully explored. Recent evidence suggests that both innate and adaptive immune responses may participate in the fibrotic process. Dendritic cells (DCs) are the most potent professional antigen-presenting cells that bridge innate and adaptive immunity. Also, they exert a crucial role in the immune surveillance of the lung, where they are strategically placed in the airway epithelium and interstitium. Immature DCs accumulate in the IPF lung close to areas of epithelial hyperplasia and fibrosis. Conversely, mature DCs are concentrated in well-organized lymphoid follicles along with T and B cells and bronchoalveolar lavage of IPF patients. We have recently shown that all sub-types of peripheral blood DCs (including conventional and plasmacytoid DCs) are severely depleted in therapy naïve IPF patients. Also, the low frequency of conventional CD1c+ DCs is predictive of a worse prognosis. The purpose of this mini-review is to focus on the main evidence on DC involvement in IPF pathogenesis. Unanswered questions and opportunities for future research ranging from a better understanding of their contribution to diagnosis and prognosis to personalized DC-based therapies will be explored

Photopolymerization of Ceramic Resins by Stereolithography Process: A Review

Stereolithography is known as one of the best Additive Manufacturing technologies in terms of geometrical and dimensional precision for polymeric materials. In recent years, a lot of studies have shown that the creation of ceramic resins, through a particular combination of monomeric components and ceramic powders, allows to obtain complex shape geometries thanks to the photopolymerization process. This review highlights the characteristics and properties of ceramic resins, peculiarities of the ceramic stereolithography processes, up to the relationship between the composition of the ceramic resin and the complexity of the post-processing phases. The comparison of different studies allows outlining the most common steps for the production of ceramic resins, as well as the physical and chemical compatibility of the different compounds that must be studied for the good feasibility of the process

Adição de metionina protegida da degrabilidade ruminal em rações para cordeiros alimentados com dois níveis de ptoteína não degradável no rúmen: degrabilidade ruminal da matéria seca1.

bitstream/CPATC/19776/1/f_14_2007.pd