La reflexividad etnográfica como soporte investigativo en las acciones publicitarias

Este artículo busca exponer la importancia de la reflexividad etnográfica como una herramienta investigativa que puede posicionarse como una de las mejores estrategias para el abordaje del consumidor, en tanto el sujeto es atravesado por eldevenir de su realidad social. La etnografía proporciona una visión holística de ese sujeto que consume, en relación consigo mismo, con el entorno y con los objetos y/o bienes disponibles para la satisfacción de sus necesidades, en tanto que permite un análisis de los procesos mercantiles o no, de los que disponen los miembros de una sociedad, que a su vez se convierten en configuradores de representaciones sociales e imaginarios en relación con las adquisiciones, usos y adhesiones, entre otras cosasde lo que en este texto se ha denominado como mercancías. Estas posibilidades investigativas le proponen al ejercicio publicitario hallar, dentro del cúmulo de datos cotidianos, los elementos comunes que subyacen en las configuraciones sociales, buscando que la retórica en este tipo de comunicación sea acorde con estas, a finde cumplir su fin último: la persuasión

Dimensión integral e interdisciplinaria del concepto de comportamiento del consumidor

Este artículo busca analizar el aporte teórico que la economía, la antropología,la psicología, la sociología y la estética hacen al estudio del concepto decomportamiento del consumidor.El estudio del comportamiento del consumidor debe buscar una miradaintegral, que permita, desde diferentes saberes y disciplinas, comprender alsujeto, su entorno y sus prácticas de consumo.El estudio del consumidor no debe supeditarse exclusivamente a los momentosdel consumo; su comprensión implica un análisis interdisciplinar, en tanto losconsumidores están inmersos en entornos sociales, económicos y culturales,que sin duda influyen en sus decisiones

Cartografía social de la experiencia religiosa en el ambiente virtual de aprendizaje de la Lic. en Ciencias Religiosas de la Pontificia Universidad Javeriana

Licenciado (a) en Ciencias ReligiosasPregrad

Simultaneous determination of traces of PT, PD, OS, IR, RH, AG and AU by using magnetic nanoparticles solid phase extraction coupled with ICP OES

The direct analysis of these target analytes is very limited being essential sample pre-treatment techniques and the use of very sensitive instrumental techniques to carry out determinations. The inductively coupled plasma optical emission spectrometry shows a poor sensitivity because the concentration of some elements in environmental samples is below the detection limit of ICP OES. To solve this problem, preconcentration separation procedures have been proposed, minimizing the spectral and matrix interferences. Thus, enrichment is a very important issue for achievement of low detection limits [1-4]. In this study, a chelating resin 1,5 bis (di 2 pyridil) methylene thiocarbonohydrazide bonded to iron oxide magnetic nanoparticles (DPTH-MNPs) were synthesized. These magnetic nanoparticles were employed as a solid phase extraction (SPE) adsorbent for the separation and concentration of trace amounts of 7 elements (Au, Ag, Pd, Pt, Ir, Rh and Os) from environmental water samples. The main aim of this work was to develop a precise and accurate method for the simultaneous determination of the maximum possible number of elements by using this new absorbent and a multimode sample introduction system (MSIS). The MSIS acts as a system for the generation, separation and introduction of chemical vapours (CVG) and also as an introduction system for sample aerosols, in a simultaneous form, into an inductively coupled plasma-optical emission spectrometer. The on-line SPE-CVG-ICP-OES system developed was applied in the determination of the aforementioned metals in natural water samples (sea water, estuarine, lake and river water), with the least demanding and simple sample preparation procedure. The developed method was validated by analysing natural water certified reference materials (TMDA 54.4 fortified lake waters and SRM 1643e, trace elements in water; and National Institute of Standards and Technology (NIST), NIST-2557 autocatalyst). Sea water, tap water and well water samples collected from Malaga (Spain) were also analysed. The procedure has been demonstrated to be fast, easy, automatic, selective and economical, and the sensitivity was good. The main advantage of DPTH-MNPs is its very good stability and resistance because chemisorption of chelating molecules on the surface of solid supports provides immobility, mechanical stability and insolubility. The precision (RSD), accuracy (by standard addition or recovery) and limit of detection (LOD) were used to evaluate the characteristics of the procedure. Furthermore, the proposed method was applied in the simultaneous determination of the 7 elements mentioned above with a sample throughput of about 13 h-1, thereby, reducing the time of analysis and the volume of reagents and sample required. References [1] M. Tuzen, M. Soylak, D. Citak, H.S. Ferreira, M.G.A. Korn, M.A. Bezerra, A pre-concentration system for determination of copper and nickel in water and food samples employing flame atomic absorption spectrometry, Journal of Haz-ardous Materials 162 (2009) 1041–1045. [2] Y. Cui, X. Chang, Y. Zhai, X. Zhu, H. Zheng, N. Lian, ICP-AES determination of trace elements after preconcentrated with p-dimethylaminobenzaldehyde-modified nanometer SiO2 from sample solution, Microchem. J. 83 (2006) 35–41. [3] P. Liang, B. Hu, Z. Jiang, Y. Qin, T. Peng, Nanometer-sized titanium dioxide micro-column on-line preconcentration of La, Y, Yb, Eu, Dy and their determination by inductively coupled plasma atomic emission spectrometry, J. Anal. Atom. Spectrom. 16 (2001) 863–866. [4] B. Feist, B. Mikula, K. Pytlakowska, B. Puzio, F. Buhl, Determination of heavy metals by ICP-OES and F-AAS after preconcentration with 2,2-bipyridyl and erythrosine, J. Hazard. Mater. 152 (2008) 1122–1129.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech

Celiac Immunogenic Potential of α-Gliadin Epitope Variants from Triticum and Aegilops Species

The high global demand of wheat and its subsequent consumption arise from the physicochemical properties of bread dough and its contribution to the protein intake in the human diet. Gluten is the main structural complex of wheat proteins and subjects affected by celiac disease (CD) cannot tolerate gluten protein. Within gluten proteins, α-gliadins constitute the most immunogenic fraction since they contain the main T-cell stimulating epitopes (DQ2.5-glia-α1, DQ2.5-glia-α2, and DQ2.5-glia-α3). In this work, the celiac immunotoxic potential of α-gliadins was studied within Triticeae: diploid, tetraploid, and hexaploid species. The abundance and immunostimulatory capacity of CD canonical epitopes and variants (with one or two mismatches) in all α-gliadin sequences were determined. The results showed that the canonical epitopes DQ2.5-glia-α1 and DQ2.5-glia-α3 were more frequent than DQ2.5-glia-α2. A higher abundance of canonical DQ2.5-glia-α1 epitope was found to be associated with genomes of the BBAADD, AA, and DD types; however, the abundance of DQ2.5-glia-α3 epitope variants was very high in BBAADD and BBAA wheat despite their low abundance in the canonical epitope. The most abundant substitution was that of proline to serine, which was disposed mainly on the three canonical DQ2.5 domains on position 8. Interestingly, our results demonstrated that the natural introduction of Q to H at any position eliminates the toxicity of the three T-cell epitopes in the α-gliadins. The results provided a rational approach for the introduction of natural amino acid substitutions to eliminate the toxicity of three T-cell epitopes, while maintaining the technological properties of commercial wheats

Sequential determination of traces of As, Sb and hg by on-line magnetic solid phase extraction coupled with Hr-Cs-Cvg-Gfaas

A green and rapid method was developed for the simultaneous separation/preconcentration and sequential monitoring pf arsenic, antimony and mercury by flow injection magnetic solid phase extraction coupled with on-line chemical vapor generation and determination by high resolution continuum source graphite furnace atomic absorption spectrometry. The system is based on chelating/cationic retention of the analytes onto a magnet based reactor designed to contain functionalized magnetic nanoparticles (MNPs). The MNP score allows overcoming the back-pressure problems that usually happen in SPME methods with NPs thanks to the possibility of inmobilizing the MNPs by applying an external magnetic field. Several chemical and flow variables were considered as factors in the optimization process using central composite designs. With the optimized procedure the detection limits obtained were 0.2, 0.003 and 0.4 µg/L for As, Sb and Hg respectively. For the quality control of the analytical performance and the validation of the developed method the analysis of two certified samples TM 24.3 and TMDA 54.4 Fortified Lake Waters was addressed. The results showed good agreement with the certified values.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech

La reflexividad etnográfica como soporte investigativo en las acciones publicitarias

Este artículo busca exponer la importancia de la reflexividad etnográfica como una herramienta investigativa que puede posicionarse como una de las mejores estrategias para el abordaje del consumidor, en tanto el sujeto es atravesado por eldevenir de su realidad social. La etnografía proporciona una visión holística de ese sujeto que consume, en relación consigo mismo, con el entorno y con los objetos y/o bienes disponibles para la satisfacción de sus necesidades, en tanto que permite un análisis de los procesos mercantiles o no, de los que disponen los miembros de una sociedad, que a su vez se convierten en configuradores de representaciones sociales e imaginarios en relación con las adquisiciones, usos y adhesiones, entre otras cosasde lo que en este texto se ha denominado como mercancías. Estas posibilidades investigativas le proponen al ejercicio publicitario hallar, dentro del cúmulo de datos cotidianos, los elementos comunes que subyacen en las configuraciones sociales, buscando que la retórica en este tipo de comunicación sea acorde con estas, a finde cumplir su fin último: la persuasión

Cold vapour generation electrothermal atomic absorption spectrometry and solid phase extraction based on a new nanosorbent for sensitive HG determination in environmental samples (sea water and river water)

Reunión bianual del Grupo Regional Andaluz de la Sociedad Española de Química AnalíticaMercury is not an essential element for plant or animal life and it is a potential environmental toxic because of its tendency to form covalent bonds with organic molecules and the high stability of the Hg-C bond. Reports estimate a total mercury concentration in natural waters ranging from 0.2 to 100 ng L-1. Due to this fact, highly sensitive methods are required for direct determination of such extremely low levels. In this work, a rapid and simple method was developed for separation and preconcentration of mercury by flow injection solid phase extraction coupled with on-line chemical vapour generation electrothermal atomic absorption spectrometry. The system is based on chelating retention of the analyte onto the mini column filled with a mesoporous silica functionalized with 1,5 bis (di-2-pyridyl) methylene thiocarbohydrazide. The main aim of this work was to develop a precise and accurate method for the determination of the Hg. Under the optima conditions and 120 s preconcentration time, the detection limit obtained was 0.009 μg L-1, with RSDs 3.7 % for 0.2 μg L-1, 4.8 % for 1 μg L-1 and enrichment factor 4, Furthermore, the method proposed has permitted the determination of Hg with a reduction in the analysis time, the sample throughput was about 18 h-1, low consumption of reagents and sample volume. The method was applied to the determination of Hg in sea water and river water. For the quality control of the analytical performance and the validation of the newly developed method, the analysis of two certified samples, TMDA 54.4 Fortified Lake, and LGC6187 River sediment was addressed. The results showed good agreement with the certified values.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech

Determination of Pb using F3eO4 GO join to DPTH for ferrofluid based dispersive solid phase extraction

In this work has been described a green and rapid method the synthesis of Fe3O4@GO nanospheres via chemical covalent bonding method. The Fe3O4@GO DPTH was applied to ferrofluid based dispersive solid phase extraction of lead as a model analyte using an ionic liquid carrier. The ferro fluid allows the rapid extraction of lead ions using a low amount of sorbent material. Besides, the magnetic separation greatly improved the separation rate. The presented method is highly time saving due to the high dispersion of the sorbent in the aqueous phase and also there is no need to shake the sample solution. The other benefits of the proposed methods are simplicity of operation, low cost, high sorption capacity, high recovery and high preconcentration. In order to optimize the method the following parameters were studied: sample solution pH, concentration of DPTH, extraction time, amount of sorbent, desorption conditions, influence of ionic strength, and tolerance of potentially interfering ions. The sample or standard solution containing Pb(II), DPTH (0.05% ethanol w/v), NaCl (0.5 %, w/v) and buffer (pH = 5.6) was poured into high volume. Then 240 µL of ferrofluid was injected rapidly into the sample solution through a syringe. Thereupon, a dark cloudy suspension was formed, ferrofluid was dispersed thoroughly in solution and the complex of Pb-DPTH was extracted in a few seconds. Subsequently, a strong magnet was placed at the bottom of the tube to let the extractant settle. After about 3 min, the solution became clear and the supernatant was discarded simply by decanting it. Afterwards, the magnet was removed and 1 mL of nitric acid (2.0 mol L−1) was introduced to the vial to desorb the Pb by sonication. Finally, the sorbent was separated by positioning the magnet to the outside of the tube and the concentration of Pb in acidic aqueous phase was determined by ETAAS.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech

Systematic review of the oral manifestations produced by the SARS-CoV-2 vaccine

To combat the coronavirus pandemic different vaccines have been developed. However, diverse adverse effects have been reported due to their use, including oral manifestations. Our objective is to review the existing bibliography to analyze what complications these vaccines have caused in the oral cavity.A bibliographic search was conducted by two independent reviewers (TS and CL), in parallel in 6 electronic databases (PubMed, Scopus, Cochrane, Google Scholar, LILACS, BioMed Central). A total of 22 articles were analyzed.The most frequent adverse effect was oral lichen planus, with a higher prevalence in women and after the Pfizer mRNA BNT162b2 vaccine.These complications are minor and resolve with treatment, so the benefit of the use of vaccines outweigh the potential risks associated with these