Facile Use of Silver Nanoparticles-Loaded Alumina/Silica in Nanofluid Formulations for Enhanced Catalytic Performance toward 4-Nitrophenol Reduction

The introduction of toxic chemicals into the environment can result in water pollution leading to the degradation of biodiversity as well as human health. This study presents a new approach of using metal oxides (Al2O3 and SiO2) modified with a plasmonic metal (silver, Ag) nanoparticles (NPs)-based nanofluid (NF) formulation for environmental remediation purposes. Firstly, we prepared the Al2O3 and SiO2 NFs of different concentrations (0.2 to 2.0 weight %) by ultrasonic-assisted dispersion of Al2O3 and SiO2 NPs with water as the base fluid. The thermo-physical (viscosity, activation energy, and thermal conductivity), electrical (AC conductivity and dielectric constant) and physical (ultrasonic velocity, density, refractive index) and stability characteristics were comparatively evaluated. The Al2O3 and SiO2 NPs were then catalytically activated by loading silver NPs to obtain Al2O3/SiO2@Ag composite NPs. The catalytic reduction of 4-nitrophenol (4-NP) with Al2O3/SiO2@Ag based NFs was followed. The catalytic efficiency of Al2O3@Ag NF and SiO2@Ag NF, for the 4-NP catalysis, is compared. Based on the catalytic rate constant evaluation, the catalytic reduction efficiency for 4-NP is found to be superior for 2% weight Al2O3@Ag NF (92.9 × 10−3 s−1) as compared to the SiO2@Ag NF (29.3 × 10−3 s−1). Importantly, the enhanced catalytic efficiency of 2% weight Al2O3@Ag NF for 4-NP removal is much higher than other metal NPs based catalysts reported in the literature, signifying the importance of NF formulation-based catalysis

Site-Specific Deposition of Au Nanoparticles in CNT Films by Chemical Bonding

There has been no attempt to date to specifically modify the nodes in carbon nanotube (CNT) networks. If the nodes can be modified in favorable ways, the electrical and/or thermal and/or mechanical properties of the CNT networks could be improved. In an attempt to influence the performance as a transparent conductive film, gold nanoparticles capped with the amino acid cysteine (Au-CysNP) have been selectively attached at the nodes of multiwalled carbon nanotubes (MWCNTs) networks. These nanoparticles have an average diameter of 5 nm as observed by TEM. FTIR and X,PS were used to characterize each step of the MWCNT chemical. functionalization process. The chemical process was designed to favor selective attachment at the nodes and not the segments in the CNT networks. The chemical processing was designed to direct formation of nodes where the gold nanoparticles are. The nanoparticles which were loosely held in the CNT network could be easily washed away by solvents, while those bound chemically remained. TEM results show that the Cys-AuNPs are preferentially located at the nodes of the CNT networks when compared to the segments. These nanoparticles at the nodes were also characterized by a novel technique called diffraction scanning transmission electron microscopy (D-STEM) confirming their identity. Four-probe measurements found that the sheet resistance of the modified CNT networks was half that of similarly transparent pristine multiwalled CNT networks