AcMYB1 Interacts With AcbHLH1 to Regulate Anthocyanin Biosynthesis in Aglaonema commutatum

Aglaonema commutatum is one of the most popular foliage plants with abundant leaf phenotypes; therefore, anthocyanin coloration is a vital economic trait in A. commutatum. However, the molecular mechanisms underlying anthocyanin biosynthesis and its regulation remain unclear. In this study, AcMYB1 and AcbHLH1, transcription factor genes related to an R2R3-myeloblast (MYB) and a basic helix–loop–helix (bHLH), respectively, were isolated from A. commutatum “Red Valentine” and functionally characterized. AcMYB1 and AcbHLH1 were found to interact by Y2H and BiFC assay. AcMYB1 was grouped into the AN2 subgroup and shared high homology with the known regulators of anthocyanin biosynthesis. Gene expression analysis showed that both AcMYB1 and AcbHLH1 have similar expression patterns to anthocyanin structural genes and correlate with anthocyanin distribution in different tissues of A. commutatum. Light strongly promoted anthocyanin accumulation by upregulating the expression of anthocyanin-related genes in A. commutatum leaves. Ectopic expression of AcMYB1 in tobacco remarkably increased anthocyanin accumulation in both vegetative and reproductive tissues at various developmental stages. These results provide insights into the regulation of anthocyanin biosynthesis in A. commutatum and are useful for breeding new A. commutatum cultivars with enhanced ornamental value

Bayesian Integration and Non-Linear Feedback Control in a Full-Body Motor Task

A large number of experiments have asked to what degree human reaching movements can be understood as being close to optimal in a statistical sense. However, little is known about whether these principles are relevant for other classes of movements. Here we analyzed movement in a task that is similar to surfing or snowboarding. Human subjects stand on a force plate that measures their center of pressure. This center of pressure affects the acceleration of a cursor that is displayed in a noisy fashion (as a cloud of dots) on a projection screen while the subject is incentivized to keep the cursor close to a fixed position. We find that salient aspects of observed behavior are well-described by optimal control models where a Bayesian estimation model (Kalman filter) is combined with an optimal controller (either a Linear-Quadratic-Regulator or Bang-bang controller). We find evidence that subjects integrate information over time taking into account uncertainty. However, behavior in this continuous steering task appears to be a highly non-linear function of the visual feedback. While the nervous system appears to implement Bayes-like mechanisms for a full-body, dynamic task, it may additionally take into account the specific costs and constraints of the task

Tree height inversion combining light detection and ranging and optical remote sensing data

Tree barriers in transmission line corridors are an important safety hazard.Scientific prediction of tree height and monitoring tree height changes are essential to solve this hidden danger. In this paper, the advantages of airborne lidar and optical remote sensing data are combined to research the method of tree height inversion. Based on glas data of lidar,waveform parameters such as waveform length, waveform leading edge length and waveform trailing edge length were extracted from waveform data by gaussian decomposition method.Terrain feature parameters were extracted from aster gdem data.The tree crown information was extracted from the optical remote sensing image by means of the mean shift algorithm. Then extract the vegetation index with high correlation with tree height.Finally, the extracted waveform feature parameters, topographic feature parameters, and crown index and vegetation index with high correlation are used as model input variables. The tree height inversion model was established using four regression methods, including multiple linear regression (mlr), support vector machine (svm), random forest (rf), and bp neural network (bpnn). The accuracy evaluation was conducted, and it was concluded that the tree height inversion model based on random forest obtained the best accuracy effect

A real case of steam-cured concrete track slab premature deterioration due to ASR and DEF

Deterioration mechanisms of some premature damaged steam-cured concrete track slabs (CTS) in Chinese railway less than 4 years were investigated. Field investigation, raw materials test and suspicious products analysis were carried out. Results show that steam-cured heat damage (SCHD) of concrete takes place in steam-cured process. Expansion products are ettringite in hydrated products and alkali-silica gels between the interface of hydrated products and coarse aggregate. SCHD makes CTS surface layer loose, porous and more micro-cracks. Long-term fatigue load from high-speed train acting on CTS enlarges concrete microcracks, leading to water penetrating into concrete easily in moist and rainy environment. In the process of water ingression, alkali-silica reaction (ASR) and delayed ettringite formation (DEF) take place, hence resulting in CTS cracking and premature deterioration

Influence of Nano-SiO2, Nano-CaCO3 and Nano-Al2O3 on Rheological Properties of Cement–Fly Ash Paste

Rheological curves of cement–fly ash (C–FA) paste incorporating nanomaterials including nano-SiO2 (NS), nano-CaCO3 (NC) and nano-Al2O3 (NA) at different resting times (hydration time of 5 min, 60 min, and 120 min) were tested with a rheometer. The rheological behaviors were described by the Herschel–Bulkley (H–B) model, and the influences of these nanomaterials on rheological properties of C–FA paste were compared. Results show that the types, content of nanomaterials and resting time have great influences on the rheological properties of C–FA paste. Incorporating NS and NA increases yield stress and plastic viscosity, and decreases the rheological index of C–FA paste. When the content of NS and NA were 2 wt%, the rheological index of C–FA paste was less than 1, indicating rheological behavior changes from shear thickening to shear thinning. Meanwhile, with rising resting time, yield stress and plastic viscosity increased significantly, but the rheological index decreased evidently, showing paste takes on shear thinning due to the rise of resting time. However, incorporating 3 wt% NC and the rising of resting time did not change the rheological properties of C–FA paste. These differences are mainly that the specific surface area (SSA) of NS (150 m2/g) and NA (120 m2/g) are much larger than that of NC (40 m2/g). The huge SSA of NS and NA consume lots of free water and these tiny particles accelerate the hydration process during resting time

Research on the Positioning Accuracy of the Cutting Head of a Tunneling Machine Based on Ultra-Wideband Positioning Technology

Directed at the problems of low positioning accuracy and irregular section forming of cutting heads of road header in coal mine production sites, a new cutting head positioning system based on ultra-wideband positioning technology is proposed based on the cutting head motion model and the working principle of ultra-wideband positioning technology, which verifies the anti-interference and the accuracy of its positioning. Combined with the simulation experiment under on-site working conditions, the influence degree of three typical influencing factors on positioning accuracy was obtained, and the accuracy optimization of the ultra-wideband positioning system was guided. Through the dynamic solution experiment, the positioning accuracy of the system is measured, and the results are verified based on the positioning system solution accuracy evaluation standard

Improvement of Mechanical Properties and Microstructure of Cementitious Materials in a Hot-Dry Environment

The hot-dry environment in high geothermal tunnels negatively affects the development of properties of cementitious materials. In order to improve the mechanical properties of cementitious materials in such environments, a proper curing system was developed, the material compositions were taken into account, and the related mechanism was analyzed by microscopic tests. The results showed that the mechanical properties and microstructure of cementitious materials can be improved effectively by adopting film curing and an adequate dosage of fly ash in a hot-dry environment. Compared with standard curing, a hot-dry environment accelerates the evaporation of water in fresh cementitious materials and the early hydration rate of cementitious materials, resulting in lots of unhydrated cement particles and an uneven distribution of hydration products, seriously decreasing the properties of the cementitious materials. Film curing keeps the water from evaporating and ensures enough water is available for hydration at an early age. The addition of FA reduces the amount of cement clinker and decreases hydration reaction rate in high temperature environments at an early stage, avoiding the unevenness of hydration products. High temperatures stimulate the pozzolanic activity of fly ash and promote the degree of secondary hydration reaction, producing more hydration products, as well as contributing to the improvement of the mechanical properties and microstructure of cementitious materials. In this study, in a hot-dry environment, the mechanical properties of mortar with 25% fly ash and 2–3 d film curing are better than those of other experimental groups, including those of standard curing

Preparation of Green Low Strength Mixture for Foundation Reinforcement Treatment by Using Fly Ash and Waste Coal Gangue

Effective foundation reinforcement treatment is essential for modern large and complex infrastructure, while it is significant for developing new green high-performance materials for foundation reinforcement. This study investigates a new green concrete by using high volume fly-ash and coal gangue aggregates, which is expected to apply for foundation treatment of modern infrastructure with high loading-bear ability. In this experiment, 12 mix proportions of fly ash coal gangue mixture (the material name, abbreviated FGM) were designed, and its mechanical properties and durability performance were investigated. The mechanical properties of FGM include compressive strength, dynamic elastic modulus, dynamic shear modulus, Poisson’s ratio, and the stress–strain behaviors. The durability performance was evaluated by the parameters of acid resistance, which simulated an acid circumstance. After that, the environmental effects about carbon emission of this material were also investigated. Results show that the FGM with 84.6% wastes utilizing rate is a cost-effective material for foundation reinforcing treatment. Its compressive strength at 28 days and 60 days can reach more than 8 MPa and 10 MPa, respectively. After being immersed in the acid environment for 140 days, the mass loss (%) of the material could be under 3.5%. The greenness shows that the e-CO2 indices of FGM are lower than 20 kg/MPa·m3, and the e-energy indices are at below 150 MJ/MPa·m3. FGM has the advantages of acid resistance, waste recycling, and lower carbon emissions than the previous methods for foundation improvement