Prey Capturing Dynamics and Nanomechanically Graded Cutting Apparatus of Dragonfly Nymph

Aquatic predatory insects, like the nymphs of a dragonfly, use rapid movements to catch their prey and it presents challenges in terms of movements due to drag forces. Dragonfly nymphs are known to be voracious predators with structures and movements that are yet to be fully understood. Thus, we examine two main mouthparts of the dragonfly nymph (Libellulidae: Insecta: Odonata) that are used in prey capturing and cutting the prey. To observe and analyze the preying mechanism under water, we used high-speed photography and, electron microscopy. The morphological details suggest that the prey-capturing labium is a complex grasping mechanism with additional sensory organs that serve some functionality. The time taken for the protraction and retraction of labium during prey capture was estimated to be 187 ± 54 ms, suggesting that these nymphs have a rapid prey mechanism. The Young’s modulus and hardness of the mandibles were estimated to be 9.1 ± 1.9 GPa and 0.85 ± 0.13 GPa, respectively. Such mechanical properties of the mandibles make them hard tools that can cut into the exoskeleton of the prey and also resistant to wear. Thus, studying such mechanisms with their sensory capabilities provides a unique opportunity to design and develop bioinspired underwater deployable mechanisms

Mechanics of snake biting: Experiments and modelling.

Among all the vertebrates, snakes possess the most sophisticated venom delivering system using their fangs. Fangs of many animals are well adapted to the mechanical loads experienced during the functions such as breaking the diet and puncturing the skin of the prey. Thus, investigation and modelling of puncturing mechanics of snakes is of importance to understand the form-function relationship of the fangs and tissue-fang interactions in detail. We have thus chosen fangs of two snake species, i.e., viper (Bitis arietans) and burrowing snake (Atractaspis aterrima), with different shape and size, and performed insertion experiments using tissue phantoms. Our results showed that the fangs of both species have similar mechanical properties but there was a difference in the insertion forces owing to the difference in shape of the fang. Also, we developed an analytical model of the fang-tissue interaction and obtained a good agreement with the experimental results. Thus, our study can help in the development of bioinspired needles that can potentially have reduced insertion forces and optimised tissue penetration

Multilayer stag beetle elytra perform better under external loading via non-symmetric bending properties

FEM images showing the von-Mises stress distribution (unit of measure GPa) in the wing and the beetle body under a concentrated load of 0.5 N .A) real structure with void, B) elytra with no void

Stag Beetle Elytra: Localized Shape Retention and Puncture/Wear Resistance

Beetles are by far one of the most successful groups of insects, with large diversity in terms of number of species. A part of this success is attributed to their elytra, which provide various functions such as protection to their bodies from mechanical forces. In this study, stag beetle (Lucanus cervus) elytra were first examined for their overall flexural properties and were observed to have a localized shape-retaining snap-through mechanism, which may play a possible role in partly absorbing impact energy, e.g., during battles and falls from heights. The snap-through mechanism was validated using theoretical calculations and also finite element simulations. Elytra were also characterized to examine their puncture and wear resistance. Our results show that elytra have a puncture resistance that is much higher than that of mandible bites. The measured values of modulus and hardness of elytra exocuticle were 10.3 +/- 0.8 GPa and 0.7 +/- 0.1 GPa, respectively. Using the hardness-to-modulus ratio as an indicator of wear resistance, the estimated value was observed to be in the range of wear-resistant biological material such as blood worms (Glyrcera dibranchiata). Thus, our study demonstrates different mechanical properties of the stag beetle elytra, which can be explored to design shape-retaining bio-inspired composites with enhanced puncture and wear resistance

Fabrication and Mechanical Characterization of Hydrogel Infused Network Silk Scaffolds

Namrata Gundiah is grateful for the Ramanujan fellowship and grant awarded through the Department of Science and Technology (DST), India that funded part of this project. Tejas G. Murthy acknowledges DST for project support. BBM gratefully acknowledges funding from DST (SB/FT/LS-213/2012) and the Department of Biotechnology (BT/PR6889/GBD/27/490/2012, BT/548/NE/U-Excel/2014), India. Nicola M. Pugno is supported by the European Research Council (ERC StG Ideas 2011 BIHSNAM n. 279985, ERC PoC 2015 SILKENE nr. 693670) and by the European Commission under the Graphene Flagship (WP14 ‘Polymer Composites’, no. 696656

Coherently aligned nanoparticles within a biogenic single crystal: A biological prestressing strategy

In contrast to synthetic materials, materials produced by organisms are formed in ambient conditions and with a limited selection of elements. Nevertheless, living organisms reveal elegant strategies for achieving specific functions, ranging from skeletal support to mastication, from sensors and defensive tools to optical function. Using state-of-the-art characterization techniques, we present a biostrategy for strengthening and toughening the otherwise brittle calcite optical lenses found in the brittlestar Ophiocoma wendtii This intriguing process uses coherent nanoprecipitates to induce compressive stresses on the host matrix, functionally resembling the Guinier-Preston zones known in classical metallurgy. We believe that these calcitic nanoparticles, being rich in magnesium, segregate during or just after transformation from amorphous to crystalline phase, similarly to segregation behavior from a supersaturated quenched alloy

Nature's Swiss Army Knives: Ovipositor Structure Mirrors Ecology in a Multitrophic Fig Wasp Community

Resource partitioning is facilitated by adaptations along niche dimensions that range from morphology to behaviour. The exploitation of hidden resources may require specially adapted morphological or sensory tools for resource location and utilisation. Differences in tool diversity and complexity can determine not only how many species can utilize these hidden resources but also how they do so.The sclerotisation, gross morphology and ultrastructure of the ovipositors of a seven-member community of parasitic wasps comprising of gallers and parasitoids developing within the globular syconia (closed inflorescences) of Ficus racemosa (Moraceae) was investigated. These wasps also differ in their parasitism mode (external versus internal oviposition) and their timing of oviposition into the expanding syconium during its development. The number and diversity of sensilla, as well as ovipositor teeth, increased from internally ovipositing to externally ovipositing species and from gallers to parasitoids. The extent of sclerotisation of the ovipositor tip matched the force required to penetrate the syconium at the time of oviposition of each species. The internally ovipositing pollinator had only one type of sensillum and a single notch on the ovipositor tip. Externally ovipositing species had multiple sensilla types and teeth on their ovipositors. Chemosensilla were most concentrated at ovipositor tips while mechanoreceptors were more widely distributed, facilitating the precise location of hidden hosts in these wasps which lack larval host-seeking behaviour. Ovipositor traits of one parasitoid differed from those of its syntopic galler congeners and clustered with those of parasitoids within a different wasp subfamily. Thus ovipositor tools can show lability based on adaptive necessity, and are not constrained by phylogeny.Ovipositor structure mirrored the increasingly complex trophic ecology and requirements for host accessibility in this parasite community. Ovipositor structure could be a useful surrogate for predicting the biology of parasites in other communities

Stag Beetle Elytra: Localized Shape Retention and Puncture/Wear Resistance

Beetles are by far one of the most successful groups of insects, with large diversity in terms of number of species. A part of this success is attributed to their elytra, which provide various functions such as protection to their bodies from mechanical forces. In this study, stag beetle (Lucanus cervus) elytra were first examined for their overall flexural properties and were observed to have a localized shape-retaining snap-through mechanism, which may play a possible role in partly absorbing impact energy, e.g., during battles and falls from heights. The snap-through mechanism was validated using theoretical calculations and also finite element simulations. Elytra were also characterized to examine their puncture and wear resistance. Our results show that elytra have a puncture resistance that is much higher than that of mandible bites. The measured values of modulus and hardness of elytra exocuticle were 10.3 ± 0.8 GPa and 0.7 ± 0.1 GPa, respectively. Using the hardness-to-modulus ratio as an indicator of wear resistance, the estimated value was observed to be in the range of wear-resistant biological material such as blood worms (Glyrcera dibranchiata). Thus, our study demonstrates different mechanical properties of the stag beetle elytra, which can be explored to design shape-retaining bio-inspired composites with enhanced puncture and wear resistance