Efficiency enhancement of a cantilever-based vibration energy harvester

Extracting energy from ambient vibration to power wireless sensor nodes has been an attractive area of research, particularly in the automotive monitoring field. This article reports the design, analysis and testing of a vibration energy harvesting device based on a miniature asymmetric air-spaced cantilever. The developed design offers high power density, and delivers electric power that is sufficient to support most wireless sensor nodes for structural health monitoring (SHM) applications. The optimized design underwent three evolutionary steps, starting from a simple cantilever design, going through an air-spaced cantilever, and ending up with an optimized air-spaced geometry with boosted power density level. Finite Element Analysis (FEA) was used as an initial tool to compare the three geometries’ stiffness (K), output open-circuit voltage (Vave), and average normal strain in the piezoelectric transducer (εave) that directly affect its output voltage. Experimental tests were also carried out in order to examine the energy harvesting level in each of the three designs. The experimental results show how to boost the power output level in a thin air-spaced cantilever beam for energy within the same space envelope. The developed thin air-spaced cantilever (8.37 cm3), has a maximum power output of 2.05 mW (H = 29.29 μJ/cycle)

A micro-capacitive pressure sensor design and modelling

Abstract. Measuring air pressure using a capacitive pressure sensor is a robust and precise technique. In addition, a system that employs such transducers lies within the low power consumption applications such as wireless sensor nodes. In this article a high sensitivity with an elliptical diaphragm capacitive pressure sensor is proposed. This design was compared with a circular diaphragm in terms of thermal stresses and pressure and temperature sensitivity. The proposed sensor is targeted for tyre pressure monitoring system application. Altering the overlapping area between the capacitor plates by decreasing the effective capacitance area to improve the overall sensitivity of the sensor (ΔC ∕ C), temperature sensitivity, and built-up stresses is also examined in this article. Theoretical analysis and finite element analysis (FEA) were employed to study pressure and temperature effects on the behaviour of the proposed capacitive pressure sensor. A MEMS (micro electro-mechanical systems) manufacturing processing plan for the proposed capacitive sensor is presented. An extra-low power short-range wireless read-out circuit suited for energy harvesting purposes is presented in this article. The developed read-out circuitry was tested in terms of sensitivity and transmission range.</jats:p

Flexible Bond Wire Capacitive Strain Sensor for Vehicle Tyres

The safety of the driving experience and manoeuvrability of a vehicle can be improved by detecting the strain in tyres. To measure strain accurately in rubber, the strain sensor needs to be flexible so that it does not deform the medium that it is measuring. In this work, a novel flexible bond wire capacitive strain sensor for measuring the strain in tyres is developed, fabricated and calibrated. An array of 25 micron diameter wire bonds in an approximately 8 mm × 8 mm area is built to create an interdigitated structure, which consists of 50 wire loops resulting in 49 capacitor pairs in parallel. Laser machining was used to pattern copper on a flexible printed circuit board PCB to make the bond pads for the wire attachment. The wire array was finally packaged and embedded in polydimethylsiloxane (PDMS), which acts as the structural material that is strained. The capacitance of the device is in a linear like relationship with respect to the strain, which can measure the strain up to at least ±60,000 micro-strain (±6%) with a resolution of ~132 micro-strain (0.013%). In-tyre testing under static loading has shown the ability of the sensor to measure large tyre strains. The technology used for sensor fabrication lends itself to mass production and so the design is considered to be consistent with low cost commercialisable strain sensing technology

Thirty years of mirena : A story of innovation and change in women's healthcare

Since its introduction in 1990, the levonorgestrel-releasing intrauterine system (LNG-IUS) has played a key role in shaping the healthcare landscape of women. Here we explore the development of the first LNG-IUS (Mirena (R)) and the early clinical trials that demonstrated its potential. We highlight the contraceptive and therapeutic benefits of Mirena (R), and discuss how clinical practice has been changed since the introduction of LNG-IUS and other long-acting reversible contraceptive methods. The history of Mirena (R) is rich in innovation and has also paved the way to the development of smaller intrauterine systems with lower hormone doses. Along with Mirena (R), these newer LNG-IUS contribute to improving contraceptive choices for women, allowing them to select the option that is right for them and that meets their needs no matter their age, parity or circumstances.Non peer reviewe

The benefits of estetrol addition to drospirenone for contraception

Ethinylestradiol and drospirenone combined oral contraceptive formulations have been marketed for &gt;20 years. Drospirenone has antimineralocorticoid and anti-androgenic effects that may offer several health benefits. Recently, 2 new drospirenone-containing oral contraceptives entered the market, 1 as a progestin-only pill containing 4 mg drospirenone and the other as a combined oral contraceptive containing 15 mg estetrol and 3 mg drospirenone. Estetrol has a unique differential effect on nuclear and membrane estrogen α-receptors when compared with other estrogens, leading to low impact on the liver, breast, and hemostasis parameters and a beneficial effect on the endometrium, vagina, cardiovascular system, bone, and brain. Phase 3 clinical studies demonstrated that the Pearl Index (pregnancies per 100-woman-years) for drospirenone alone is 4.0 in the United States and 0.93 in the European Union and for the estetrol-drospirenone combination it is 2.65 and 0.44, respectively. Drospirenone alone demonstrates high rates of unscheduled bleeding and low rates of scheduled bleeding, whereas the estetrol-drospirenone combination demonstrates a predictable and regular bleeding profile for most users with a high stable rate of scheduled bleeding and a low rate of unscheduled bleeding, reported primarily as spotting only. The adverse event profiles and discontinuation rates owing to adverse events are comparable, and no clinically significant effects were observed on metabolic parameters with either product. Hemostatic assays for drospirenone do not fully evaluate all parameters although the testing that is available suggests negligible effects, whereas validated hemostatic assays demonstrate that the estetrol-drospirenone combination has limited impact on hemostasis. The introduction of 4 mg drospirenone and 15 mg estetrol with 3 mg drospirenone are valuable additions to the contraceptive market. Adding estetrol to 3 mg drospirenone provides advantages of contraceptive efficacy and a regular, predictable bleeding profile with minimal impact on hemostasis parameters

More than just contraception : the impact of the levonorgestrel-releasing intrauterine system on public health over 30 years

Universal access to sexual and reproductive health services is essential to facilitate the empowerment of women and achievement of gender equality. Increasing access to modern methods of contraception can reduce the incidence of unplanned pregnancy and decrease maternal mortality. Long-acting reversible contraceptives (LARCs) offer high contraceptive efficacy as well as cost-efficacy, providing benefits for both women and healthcare systems. The levonorgestrel-releasing intrauterine system (LNG-IUS) first became available in 1990 with the introduction of Mirena (LNG-IUS 20), a highly effective contraceptive which can reduce menstrual blood loss and provide other therapeutic benefits. The impact of the LNG-IUS on society has been wide ranging, including decreasing the need for abortion, reducing the number of surgical sterilisation procedures performed, as well as reducing the number of hysterectomies carried out for issues such as heavy menstrual bleeding (HMB). In the context of the COVID-19 pandemic, Mirena can provide a treatment option for women with gynaecological issues such as HMB without organic pathology, minimising exposure to the hospital environment and reducing waiting times for surgical appointments. Looking to the future, research and development in the field of the LNG-IUS continues to expand our understanding of these contraceptives in clinical practice and offers the potential to further expand the choices available to women, allowing them to select the option that best meets their needs.Non peer reviewe

Mechanical, thermal and durable performance of wastes sawdust as coarse aggregate replacement in conventional concrete

Wood yields a number of by-products and Sawdust is as useful as others. Sawdust is regarded as a waste material and is effectively utilised as sawdust concrete in the construction of buildings. It is capable to be utilised as light-weight concrete and holds the quality of long duration heat transfer. In this study, three different ratios (1:1, 1:2 and 1:3) volume mix proportions of cement to sawdust were adopted to make sawdust concrete. At varied intervals of 7, 28 and 56 days of air curing, thermal and mechanical properties like workability, density, elastic modulus, strength and heat transfer were probed of mentioned sawdust concrete proportions. The resistance to elevated temperatures was also evaluated after 28 days of age; weight loss, residual compressive strength, surface texture and ultrasonic pulse velocity were considered in evaluation process. The findings showed that increase in sawdust volume affected to decrease the workability, strength and elevated temperatures resistance. However, the concrete having higher proportion of sawdust performed competently and well in terms of thermal conductivity. Moreover, a decrease in the heat transfer of sawdust was also observed. Examining the all-embracing mechanical and physical properties, sawdust can be effectively utilised in the construction of buildings

Wireless tyre condition monitoring system self-powered by means of energy harvesting

A self-energized Tyre Condition Monitoring System (TCMS) based on direct strain energy harvester was modelled, designed and tested in this research. This research went through three main stages. A micro capacitive absolute pressure sensor suited for tyre inflation pressure measurement was modelled theoretically and numerically. A vibration based energy harvester and a direct strain energy harvester were modelled, designed, tested and compared. In the final stage, the energy harvester with the higher efficiency and energy density was employed to power the designed TCMS. The main feature that differentiates the designed TCMS from other TPMSs in the markets is its energy self-sufficiency -neither internal battery nor external power supply is needed. It has an operating lifespan which far exceeds that of Lithium batteries which have a lifespan of 5 to 7 years at best with fluctuating energy density due to environmental conditions, It can operate long enough to cover the lifespan of an average passenger vehicle pneumatic tyre (20k -80k miles). Such system also has the advantage of avoiding the environmental impact associated with using and disposing of Lithium batteries in terms of both health concerns and battery disposal costs