Hot water in the inner 100 AU of the Class 0 protostar NGC1333 IRAS2A

Evaporation of water ice above 100 K in the inner few 100 AU of low-mass embedded protostars (the so-called hot core) should produce quiescent water vapor abundances of ~10^-4 relative to H2. Observational evidence so far points at abundances of only a few 10^-6. However, these values are based on spherical models, which are known from interferometric studies to be inaccurate on the relevant spatial scales. Are hot cores really that much drier than expected, or are the low abundances an artifact of the inaccurate physical models? We present deep velocity-resolved Herschel-HIFI spectra of the 3(12)-3(03) lines of H2-16O and H2-18O (1097 GHz, Eup/k = 249 K) in the low-mass Class 0 protostar NGC1333 IRAS2A. A spherical radiative transfer model with a power-law density profile is unable to reproduce both the HIFI data and existing interferometric data on the H2-18O 3(13)-2(20) line (203 GHz, Eup/k = 204 K). Instead, the HIFI spectra likely show optically thick emission from a hot core with a radius of about 100 AU. The mass of the hot core is estimated from the C18O J=9-8 and 10-9 lines. We derive a lower limit to the hot water abundance of 2x10^-5, consistent with the theoretical predictions of ~10^-4. The revised HDO/H2O abundance ratio is 1x10^-3, an order of magnitude lower than previously estimated.Comment: Accepted by ApJ; 12 pages in emulateapj format; 7 figure

Steady Wind-blown Cavities within Infalling Rotating Envelopes:Application to the Broad Velocity Component in Young Protostars

Wind-driven outflows are observed around a broad range of accreting objects throughout the Universe, ranging from forming low-mass stars to super-massive black holes. We study the interaction between a central isotropic wind and an infalling, rotating, envelope, determining the steady-state cavity shape formed at their interface under the assumption of weak mixing. The shape of the resulting wind-blown cavity is elongated and self-similar, with a physical size determined by the ratio between wind ram pressure and envelope thermal pressure. We compute the growth of a warm turbulent mixing-layer between the shocked wind and the deflected envelope, and calculate the resultant broad line profile, under the assumption of a linear (Couette-type) velocity profile across the layer. We then test our model against the warm broad velocity component observed in CO $J$=16--15 by Herschel/HIFI in the protostar Serpens-Main SMM1. Given independent observational constraints on the temperature and density of the dust envelope around SMM1, we find an excellent match to all its observed properties (line profile, momentum, temperature) and to the SMM1 outflow cavity width for a physically reasonable set of parameters: a ratio of wind to infall mass-flux $\simeq 4\%$, a wind speed $v_{\rm w} \simeq 30$ km/s, an interstellar abundance of CO and H$_2$, and a turbulent entrainment efficiency consistent with laboratory experiments. The inferred ratio of ejection to disk accretion rate, $\simeq 6-20\%$, is in agreement with current disk wind theories. Thus, the model provides a new framework to reconcile the modest outflow cavity widths in protostars with the large observed flow velocities. Being self-similar, it is applicable over a broader range of astrophysical contexts as well.Comment: 31 pages, 21 figures, accepted to ApJ for publication (comments are welcome

Outflow forces of low mass embedded objects in Ophiuchus: a quantitative comparison of analysis methods

The outflow force of molecular bipolar outflows is a key parameter in theories of young stellar feedback on their surroundings. The focus of many outflow studies is the correlation between the outflow force, bolometric luminosity and envelope mass. However, it is difficult to combine the results of different studies in large evolutionary plots over many orders of magnitude due to the range of data quality, analysis methods and corrections for observational effects such as opacity and inclination. We aim to determine the outflow force for a sample of low luminosity embedded sources. We will quantify the influence of the analysis method and the assumptions entering the calculation of the outflow force. We use the James Clerk Maxwell Telescope to map 12CO J=3-2 over 2'x2' regions around 16 Class I sources of a well-defined sample in Ophiuchus at 15" resolution. The outflow force is then calculated using seven different methods differing e.g. in the use of intensity-weighted emission and correction factors for inclination. The results from the analysis methods differ from each other by up to a factor of 6, whereas observational properties and choices in the analysis procedure affect the outflow force by up to a factor of 4. For the sample of Class I objects, bipolar outflows are detected around 13 sources including 5 new detections, where the three non-detections are confused by nearby outflows from other sources. When combining outflow forces from different studies, a scatter by up to a factor of 5 can be expected. Although the true outflow force remains unknown, the separation method (separate calculation of dynamical time and momentum) is least affected by the uncertain observational parameters. The correlations between outflow force, bolometric luminosity and envelope mass are further confirmed down to low luminosity sources.Comment: 24 pages, 13 figures, Accepted by A&

Feedback of molecular outflows from protostars in NGC 1333 revealed by Herschel and Spitzer spectro-imaging observations

Context. Far infrared cooling of excited gas around protostars has been predominantly studied in the context of pointed observations. Large-scale spectral maps of star forming regions enable the simultaneous, comparative study of the gas excitation around an ensemble of sources at a common frame of reference, therefore, providing direct insights in the multitude of physical processes involved.Aims. We employ extended spectral-line maps to decipher the excitation, the kinematical, and dynamical processes in NGC 1333 as revealed by a number of different molecular and atomic lines, aiming to set a reference for the applicability and limitations of different tracers in constraining particular physical processes.Methods. We reconstructed line maps for H-2, CO, H2O, and [CI] using data obtained with the Spitzer infrared spectrograph and the Herschel HIFI and SPIRE instruments. We compared the morphological features revealed in the maps and derive the gas excitation conditions for regions of interest employing local thermodynamic equilibrium (LTE) and non-LTE methods. We also calculated the kinematical and dynamical properties for each outflow tracer in a consistent manner for all observed outflows driven by protostars in NGC 1333. We finally measured the water abundance in outflows with respect to carbon monoxide and molecular hydrogen.Results. CO and H-2 are highly excited around B-stars and, at lower, levels trace protostellar outflows. H2O emission is dominated by a moderately fast component associated with outflows. H2O also displays a weak, narrow-line component in the vicinity of B-stars associated to their ultraviolet (UV) field. This narrow component is also present in a few of outflows, indicating UV radiation generated in shocks. Intermediate J CO lines appear brightest at the locations traced by the narrow H2O component, indicating that beyond the dominating collisional processes, a secondary, radiative excitation component can also be active. The morphology, kinematics, excitation, and abundance variations of water are consistent with its excitation and partial dissociation in shocks. Water abundance ranges between 5 x 10(-7) and similar to 10(-5), with the lower values being more representative. Water is brightest and most abundant around IRAS 4A, which is consistent with the latter hosting a hot corino source. [CI] traces dense and warm gas in the envelopes surrounding protostars. Outflow mass flux is highest for CO and decreases by one and two orders of magnitude for H-2 and H2O, respectively.Conclusions. Large-scale spectral line maps can provide unique insights into the excitation of gas in star-forming regions. A comparative analysis of line excitation and morphologies at different locations allows us to decipher the dominant excitation conditions in each region in addition to isolating exceptional cases

Complex molecules toward low-mass protostars: the Serpens core

Gas-phase complex organic molecules are commonly detected toward high-mass protostellar hot cores. Detections toward low-mass protostars and outflows are comparatively rare, and a larger sample is key to investigate how the chemistry responds to its environment. Guided by the prediction that complex organic molecules form in CH3OH-rich ices and thermally or non-thermally evaporate with CH3OH, we have identified three sight-lines in the Serpens core - SMM1, SMM4 and SMM4-W - which are likely to be rich in complex organics. Using the IRAM 30m telescope, narrow lines (FWHM of 1-2 km s-1) of CH3CHO and CH3OCH3 are detected toward all sources, HCOOCH3 toward SMM1 and SMM4-W, and C2H5OH not at all. Beam-averaged abundances of individual complex organics range between 0.6 and 10% with respect to CH3OH when the CH3OH rotational temperature is applied. The summed complex organic abundances also vary by an order of magnitude, with the richest chemistry toward the most luminous protostar SMM1. The range of abundances compare well with other beam-averaged observations of low-mass sources. Complex organic abundances are of the same order of magnitude toward low-mass protostars and high-mass hot cores, but HCOOCH3 is relatively more important toward low-mass protostars. This is consistent with a sequential ice photochemistry, dominated by CHO-containing products at low temperatures and early times.Comment: 20 pages, including 5 figures. Accepted for publication in Ap

APEX-CHAMP+ high-J CO observations of low-mass young stellar objects: III. NGC 1333 IRAS 4A/4B envelope, outflow and UV heating

NGC 1333 IRAS 4A and IRAS 4B sources are among the best studied Stage 0 low-mass protostars which are driving prominent bipolar outflows. Most studies have so far concentrated on the colder parts (T<30K) of these regions. The aim is to characterize the warmer parts of the protostellar envelope in order to quantify the feedback of the protostars on their surroundings in terms of shocks, UV heating, photodissociation and outflow dispersal. Fully sampled large scale maps of the region were obtained; APEX-CHAMP+ was used for 12CO 6-5, 13CO 6-5 and [CI] 2-1, and JCMT-HARP-B for 12CO 3-2 emissions. Complementary Herschel-HIFI and ground-based lines of CO and its isotopologs, from 1-0 upto 10-9 (Eu/k 300K), are collected at the source positions. Radiative-transfer models of the dust and lines are used to determine temperatures and masses of the outflowing and UV-heated gas and infer the CO abundance structure. Broad CO emission line profiles trace entrained shocked gas along the outflow walls, with typical temperatures of ~100K. At other positions surrounding the outflow and the protostar, the 6-5 line profiles are narrow indicating UV excitation. The narrow 13CO 6-5 data directly reveal the UV heated gas distribution for the first time. The amount of UV-heated and outflowing gas are found to be comparable from the 12CO and 13CO 6-5 maps, implying that UV photons can affect the gas as much as the outflows. Weak [CI] emission throughout the region indicates a lack of CO dissociating photons. Modeling of the C18O lines indicates the necessity of a "drop" abundance profile throughout the envelope where the CO freezes out and is reloaded back into the gas phase, thus providing quantitative evidence for the CO ice evaporation zone around the protostars. The inner abundances are less than the canonical value of CO/H_2=2.7x10^-4, indicating some processing of CO into other species on the grains.Comment: 20 pages, 22 figures, Accepted by A&

An extremely high velocity molecular jet surrounded by an ionized cavity in the protostellar source Serpens SMM1

We report ALMA observations of a one-sided, high-velocity ($\sim$80 km s$^{-1}$) CO($J = 2 \rightarrow 1$) jet powered by the intermediate-mass protostellar source Serpens SMM1-a. The highly collimated molecular jet is flanked at the base by a wide-angle cavity; the walls of the cavity can be seen in both 4 cm free-free emission detected by the VLA and 1.3 mm thermal dust emission detected by ALMA. This is the first time that ionization of an outflow cavity has been directly detected via free-free emission in a very young, embedded Class 0 protostellar source that is still powering a molecular jet. The cavity walls are ionized either by UV photons escaping from the accreting protostellar source, or by the precessing molecular jet impacting the walls. These observations suggest that ionized outflow cavities may be common in Class 0 protostellar sources, shedding further light on the radiation, outflow, and jet environments in the youngest, most embedded forming stars.Comment: 6 pages, 4 figures, accepted for publication in the Astrophysical Journal Letter

Protostellar accretion traced with chemistry. High resolution C18O and continuum observations towards deeply embedded protostars in Perseus

Context: Understanding how accretion proceeds is a key question of star formation, with important implications for both the physical and chemical evolution of young stellar objects. In particular, very little is known about the accretion variability in the earliest stages of star formation. Aims: To characterise protostellar accretion histories towards individual sources by utilising sublimation and freeze-out chemistry of CO. Methods: A sample of 24 embedded protostars are observed with the Submillimeter Array (SMA) in context of the large program "Mass Assembly of Stellar Systems and their Evolution with the SMA" (MASSES). The size of the C$^{18}$O emitting region, where CO has sublimated into the gas-phase, is measured towards each source and compared to the expected size of the region given the current luminosity. The SMA observations also include 1.3 mm continuum data, which are used to investigate whether a link can be established between accretion bursts and massive circumstellar disks. Results: Depending on the adopted sublimation temperature of the CO ice, between 20% and 50% of the sources in the sample show extended C$^{18}$O emission indicating that the gas was warm enough in the past that CO sublimated and is currently in the process of refreezing; something which we attribute to a recent accretion burst. Given the fraction of sources with extended C$^{18}$O emission, we estimate an average interval between bursts of 20000-50000 yr, which is consistent with previous estimates. No clear link can be established between the presence of circumstellar disks and accretion bursts, however the three closest known binaries in the sample (projected separations <20 AU) all show evidence of a past accretion burst, indicating that close binary interactions may also play a role in inducing accretion variability.Comment: Accepted for publication in A&A, 21 pages, 13 figure