21 research outputs found
Common or independent? The debate over regulations and standards for water reuse in Europe
Although unplanned water reuse has been practised across Europe for decades, multiple stresses on water supply and demand over recent years have led to the development of many planned reuse schemes. Despite this development, the legislative and regulatory regimes required to underpin a growing water reuse sector have arguably failed to emerge. The reasons for this and the cases for and against pan-European water reuse regulations are explored and debated. The conclusions highlight several challenges for politicians and policy makers if appropriate regulatory systems and water quality standards are to be provided which support the embryonic European water reuse sector
Understanding struvite crystallisation and recovery
Struvite crystallisation from wastewater effluents is seen as an alternative to traditional biological and chemical phosphorus removal processes used widely in the wastewater treatment industry. It presents the advantage of not only removing phosphorus but also generating a compound that could be reused as a fertiliser. However the application of struvite crystallisation processes at full scale is not widespread due to the unknown economical value of the process and the product, the need of pH control, the necessity of long operational times to ensure quality of the product and the formation of crystal fines. Preliminary crystallisation experiments were carried out at laboratory scale to provide a better understanding of nucleation and growth processes, and identify how basic parameters such as pH, mixing energy, water chemistry or presence of foreign ions affected struvite crystallisation. Particular attention was paid to the quality (i.e. size, shape and purity) of the crystal formed. The results revealed that the presence of calcium ions in solution could alter struvite purity and even inhibit its formation. pH was also identified as a parameter of major impact on struvite crystal quality. Indeed, pH could either influence struvite purity or affect size of crystals formed. Further investigations in a purposely built reactor also revealed that if struvite crystallisation is relatively simple to achieve, the control of struvite quality and more particularly crystal size is complex. Results at pilot scale showed that reactor operation and struvite surface charge could be a limitation to its agglomerative properties, hence to the formation of larger crystals. To optimise struvite crystallisation and limit the problem of fines formation the present study has investigated two possible solutions: struvite fines recovery by coagulation or struvite crystallisation on seed materials. Struvite coagulation proved to be an efficient solution to remove and recover struvite fines rapidly through floc formation. Of the coagulant tested, polyDADMAC was the most effective resulting in the formation of flocs 10 times bigger than the initial size of crystals. With regards to crystallisation on seed materials, the results revealed that success of struvite attachment onto seeds in short contact times was only efficient when mixing energy in the reactor was limited. In that sense, the submersion of a metallic system in the reactor allowed excellent phosphorus removal and rapid struvite recovery in only 2 hours of operation.EThOS - Electronic Theses Online ServiceGBUnited Kingdo
Impact of pre-treatment technologies on soil aquifer treatment
This study investigates the impact of pre-treatment options on the performances of soil columns simulating soil aquifer treatment (SAT). For this purpose a conventional activated sludge (CAS) process, a membrane bioreactor (MBR) and vertical flow reed beds were used as single units or in combination before SAT. The influent and effluent from each treatment train were monitored over three successive 6-month periods, corresponding to changes in the operational conditions of the MBR and CAS units from 6 days' sludge retention time (SRT) to 12 and 20 days. All the columns acted as efficient polishing steps for solids and bacteria. The column receiving effluent from the CAS system running at 6 days' SRT also presented high total nitrogen and total phosphorus removals, but this column was also associated with the lowest infiltration rates over that period. While the quality of the effluent from the column following the CAS process increased over 18 months of operation, the effluent quality of the columns receiving MBR effluent degraded. No correlations were found between variations in SRT of the MBR and CAS processes and the columns' performances. Overall, all columns, except the one receiving CAS effluent, underwent a reduction in infiltration rate over 18 months
What is the impact of personal care products selection on greywater characteristics and reuse?
Accounting for up to three quarters of the wastewater volume resulting from domestic activities but containing only a third of its organic content, greywater is seen as an alternative water source for non-potable reuse. This unique study explores the question whether consumers' product selection could affect the treatability and reuse of bathroom greywater. Fifty five personal care and household products (PCHP) were analysed for their effects on a range of water quality parameters including their aquatic and soil toxicity using Microtox® and MicroResp™. The organic content of these PCHPs varied considerably, not only from one category to another (0.2 gTOC.L−1 for hair conditioners to 2.7 gTOC.L−1 for toothpastes), but also within each category (0.1 gTOC.L−1 to 3.6 gTOC.L−1 amongst the shampoos). As expected, the PCHPs' macronutrient content was low, suggesting some limitation towards biological treatment of bathroom greywater. Regarding the impact of product selection on toxicity towards aquatic and soil microorganisms, the results revealed a higher sensitivity of Vibrio fischeri to the individual PCHPs than the MicroResp™ soil microorganisms. In the latter case, 75% of the products caused a stimulation response from the microorganisms although some decreases in basal respiration were observed for specific PCHPs within product categories. However, based solely on MicroResp™, the short-term discharge of treated bathroom greywater, regardless of consumer product selection, is unlikely to have a negative impact on soil microbial activity. Overall, the work has demonstrated the importance of consumer choice on the pollution load and treatability of greywater. However, no clear link between greywater characteristics and factors that normally determine consumer product selection (branding, type) were identified. This means it is not currently possible for consumers to actively manage the issue through choice such that process designers and technology developers must ensure technologies are sufficiently robust to manage the potential variations that could occur
Reactive media constructed wetland for phosphorus removal: assessing the opportunity and challenges
Reactive media present an alternative to gravel in constructed wetlands and have the potential to sustainably and efficiently remove phosphorus from wastewater. In this study, a full-scale steel slag wetland has been operated for its whole lifecycle at which 1.39 mg P/g media were retained. During its lifecycle, this wetland met strict consents below 0.5 mg P/L for the first 6 months and was operated for 266 and 353 days before the effluent phosphorus concentration rose above the typical consents of 1 and 2 mg P/L, respectively. A detailed analysis of the system demonstrated that the performance was directly associated with the release of materials from the media into the water which in turn affected other critical parameters such as pH. Further analysis of the media suggested that greater understanding was needed concerning the role of carbonates and in particular calcite if steel slag is to be effectively managed for use on constructed wetlands. Importantly, controlled release of calcium oxide from the media surface is required by managing the concerns of pH and vanadium release.Severn Trent Water. In addition, some of the work reported here was part of the AquaNES project which has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement no. 689450
The multiple uses of water derived from managed aquifer recharge systems in Kenya and India
‘Multiple-use services’ (MUS) takes into account the fact that households use water for both domestic and for productive uses. This paper is the first to determine how managed aquifer recharge (MAR) systems are a form of MUS. Two cases were studied in India and in Kenya. In the Kenyan case, sand dams are the form of MAR, and in India check dams and infiltration ponds of various scales are used. Through observations, interviews, and water quality data, it is possible to describe how the communities access the water from these infrastructures in multiple ways for different uses, according to their water needs and the characteristics of the different access points. MAR involves harvesting rainwater and retaining run-off water into the dry season thus increasing the amount of available water and enabling diversification of water uses. It should therefore be considered as an option by water managers aiming to develop water resources meeting both the domestic and productive needs of communities.Engineering and Physical Sciences Research Council (EPSRC): EP/N009711/1 and
Natural Environment Research Council (NERC):NE/R003351/1
Membrane-assisted reactive crystallisation for the recovery of dissolved phosphorus in vivianite form from liquid effluents
Novel membrane crystallisation processes resolve the mixing challenge on conventional crystallisers, by providing fixed interfacial area over which supersaturation is controlled for nucleation. Moreover, the membrane surface is thought to reduce interfacial energy and encourage micromixing. In this regard, a novel membraneassisted reactive crystallisation (MARC) process was used in this work for the dissolved phosphorous recovery in form of vivianite crystals from a phosphate-rich solution by means of the dosing of iron (II). To characterise the role of the boundary layer in controlling nucleation, a batch lab-scale system was used for the crystallization tests, and different hydraulic conditions (Reynolds ranging from 105 to 395) and polymeric membranes were tested. The crystallisation process was influenced by the hydraulic conditions, in which a low liquid velocity led to a lower induction time and vivianite supersaturation, and therefore, higher nucleation rates. Membrane properties were characterised to establish their role in the modification of the critical free energy requirement for nucleation, and for the promotion of micromixing, as possible factors that can be used to modify nucleation kinetics. As result, the bulk induction time tended to decrease with the increase in membrane hydrophobicity, roughness, pore size and porosity. Spherical vivianite nanoparticles were always synthesised with a mean size around 35 nm and a narrow distribution independently of the hydraulic conditions and membrane used. Finally, the crystallisation kinetic conformed to a diffusion-dependent nucleation mechanism, in which higher residence times for mixing increased the ion collision probability for nucleation. Importantly, this study demonstrated that MARC is an attractive prospect for nutrient recovery from wastewaters where crystal nucleation can be easily controlled by setting the operational conditions and membrane properties, eliciting considerable process intensification over existing conventional crystalliser.European Union funding: 71408
Estimation of groundwater recharge in semiarid regions under variable land use and rainfall conditions: a case study of Rajasthan, India
In the semiarid regions of India, the annual rainfall is very low (~650 mm) and erratic; hence groundwater recharge is vital to support crops, especially in the winter season. For groundwater budgeting it is essential to consider how groundwater recharge is affected by both land-use and rainfall distribution. This study used a soil water balance approach, considering hydrological, meteorological, hydrogeological and crop information to understand the recharge process in semiarid regions. The approach was used at a sub-watershed scale where farmers grow rainfed and irrigated crops. Delayed recharge response on the water table was considered to estimate actual recharge, which closely matches the observed water levels in the field. The recharge estimated in rainfed agricultural lands, rainfed-irrigated agricultural lands, and barren lands was 29%, 17%, and 31% of the total inflow.Natural Environment Research Council (NERC): NE/R003351/
Scaling-up engineering biology for enhanced environmental solutions
Synthetic biology (SynBio) offers transformative solutions for addressing environmental challenges by engineering organisms capable of degrading pollutants, enhancing carbon sequestration, and valorizing waste (Figure 1). These innovations hold the potential to revolutionize bioremediation strategies, ecosystem restoration, and sustainable environmental management. (1) Advances in SynBio, including automation, precise manipulation of genetic material, (2) and design of semisynthetic organisms with enhanced capabilities, can improve the efficiency of microbes for eliminating pollutants such as hydrocarbons and plastics or extracting valuable resources from the environment. (3) Genome editing technologies, such as CRISPR-Cas9, allows the editing of genomes with unprecedented accuracy, facilitating the development of organisms with desired traits or functions. (4) Furthermore, SynBio encompasses the engineering of metabolic enzymes within organisms, leading to the design of microbial factories capable of degrading complex and persistent chemicals, and converting waste to valuable resources. (5) These advancements also facilitate the manipulation of bacterial social behaviors, offering the capacity for tunable control at the multicellular level and engineered biofilms. (5