Rapid formation of phase-clean 110 K (Bi-2223) powders derived via freeze-drying process

This invention relates to an improved process of preparing Bi-Sr-Ca-Cu-O (BSCCO) powders, and more particularly, to a process for preparing BSCCO powders that utilize freeze-drying. The process generally includes splat freezing a nitrate solution of Bi, Pb, Sr, Ca, and Cu to form flakes of the solution; grinding the flakes to form a powder; freeze-drying the frozen powder; heating the powder to form dry green precursor powders; denitrating the powders; and heating the powders to form phase-clean Bi-2223 powders

An analysis of environment effect on ethanol blends with plastic fuel and blend optimization using a full factorial design

Abstract There is a growing amount of plastic waste that needs to be properly disposed of in order to protect the environment from the negative effects of increasing reliance on plastic products. Recent interest has focused on chemical recycling as a means of reducing plastic's negative environmental effects. Converting waste plastics into basic petrochemicals allows them to serve as hydrocarbon feedstock or fuel oil through pyrolysis operations. Scientists have taken a keen interest in the production of bioethanol from renewable feedstocks due to its potential as a source of energy and alternative fuel. Due to its beneficial effects on the environment, ethanol has emerged as a promising biofuel. In this paper, energy recovered from low-density polyethylene and high-density polyethylene waste was converted into an alternative plastic fuel and evaluated for its environmental impact with the blending of ethanol in a diesel engine. Ternary fuel blends with 20%, 30%, and 40% waste plastic fuel and 10%, 15%, and 20% ethanol with standard diesel were tested. The study found that blending 10% ethanol with 20% plastic fuel decreased fuel consumption by around 7.9% compared to base diesel. Carbon monoxide emissions are reduced by about 10.2%, and hydrocarbon emissions are reduced by about 13.43% when using the same ternary blend. The optimum values of fuel consumption and emissions were obtained by full factorial design for a ternary fuel blend of 10% ethanol and 20% plastic fuel at the full load condition

The theoretical prediction of the boundary-layer-blockage and external flow choking at moving aircraft in ground effects

The theoretical discoveries of the Sanal flow choking [V. R. Sanal Kumar et al., "Sanal flow choking: A paradigm shift in computational fluid dynamics code verification and diagnosing detonation and hemorrhage in real-world fluid-flow systems,"Global Challenges 4, 2000012 (2020)] and streamtube flow choking [V. R. Sanal Kumar et al., "Deflagration to detonation transition in chemical rockets with sudden expansion/divergence regions,"AIAA Paper No. 2020-3520, 2020] achieved significant contemplation in all branches of science and engineering for resolving various unanswered scientific questions brought onward from the beginning of this era [V. R. Sanal Kumar et al., "A closed-form analytical model for predicting 3D boundary layer displacement thickness for the validation of viscous flow solvers,"AIP Adv. 8, 025315 (2018)]. The applications of these flow choking phenomena are more significant in aerospace industries [V. R. Sanal Kumar et al., "Nanoscale flow choking and spaceflight effects on cardiovascular risk of astronauts - A new perspective,"AIAA Paper No. 2021-0357, 2021] and medical sciences [V. R. Sanal Kumar et al., "Lopsided blood-thinning drug increases the risk of internal flow choking leading to shock wave generation causing asymptomatic cardiovascular disease,"Global Challenges 2021, 2000076]. Herein, as an offshoot of the Sanal flow choking phenomena, the proof of the concept of boundary-layer-blockage (BLB) persuaded external-flow-choking (EFC) at aircraft-in-ground (AIG)-effect is presented. When the aircraft's ground clearance is relatively low, the evolving BLB factor from both planes (the bottom surface of the aircraft and the ground) creates a transient fluid-throat, leading to the Sanal flow choking and supersonic flow development in the duct flow region. In this physical situation, the pressure ratio (Ptotal/Pstatic) at the external flow choking region is exclusively a function of the specific heat ratio of the fluid. The EFC is more prone for the low wing aircraft flying in the near vicinity to the ground and/or sea with relatively high subsonic Mach number and low angle of attack. At this flying condition, the underside of the aircraft (fuselage and/or wing) and the ground creates the convergent-divergent duct flow effect leading to the EFC at the critical total-to-static pressure ratio. The accurate estimation of the BLB factor at the location of the EFC at AIG effect is presented in this manuscript as a universal yardstick for two-dimensional (2D) in silico simulation. For establishing the proof of the concept of external flow choking and supersonic flow development and shock wave generation, the 2D in silico results are presented for both stationary and moving airfoils in ground effect. In silico results show that the airfoil at stationary position exhibits relatively higher BLB factor and an immediate occurrence of the EFC than the same airfoil moving with the identical inflow Mach number and Reynolds number. We could establish herein that the moving vehicle simulation is inevitable for capturing actual flow physics and further precise examination of the BLB factor and the possibilities of the occurrence of the EFC for credible trajectory optimization of high-speed ground-effect vehicles. © 2021 Author(s).12 month embargo; published online: 11 March 2021This item from the UA Faculty Publications collection is made available by the University of Arizona with support from the University of Arizona Libraries. If you have questions, please contact us at [email protected]