Return to fertility after extended chemical castration with a GnRH antagonist

BACKGROUND: Antagonistic analogues of GnRH for the treatment of prostate cancer may be used clinically in persons for whom return to fertility after such treatment is important or desirable. The purpose of this study was, therefore, to evaluate the effects of a long term treatment with orntide, a GnRH antagonist, on testosterone levels and fertility in male rats. METHODS: Two groups of male rats received either 120-day orntide microspheres (8.8 mg orntide/kg/120 days) or vehicle alone (control group). Serum orntide and testosterone levels in both groups were monitored at certain intervals for 9 months from the initiation of treatment. After recovery of normal serum testosterone levels in the treated animals, each rat was housed with two proven breeder, but drug-naive, females. RESULTS: All mates of treated rats achieved pregnancy as rapidly as the mates of control rats although two of the control rats did not sire a litter with either female and one sired only one litter. The mean size of the litters of treated (12.3 offspring per litter) and control (10.6 offspring per litter) were similar. All offspring were grossly normal morphologically and behaviorally during the time to weaning. CONCLUSIONS: These results suggest that lack of fertility due to testosterone suppression is reversible after cessation of treatment with this GnRH antagonist

Identification of chemically modified peptide from poly(D,L-lactide-co-glycolide) microspheres under in vitro release conditions

The purpose of this research was to study the chemical reactivity of a somatostatin analogue octreotide acetate, formulated in microspheres with polymers of varying molecular weight and co-monomer ratio under in vitro testing conditions. Poly(D,L-lactide-co-glycolide) (PLGA) and poly(D,L-lactide) (PLA) microspheres were prepared by a solvent extraction/evaporation method. The microspheres were characterized for drug load, impurity content, and particle size. Further, the microspheres were subjected to in vitro release testing in acetate buffer (pH 4.0) and phosphate buffered saline (PBS) (pH 7.2). In acetate buffer, 3 microsphere batches composed of low molecular weight PLGA 50∶50, PLGA 85∶15, and PLA polymers (≤10 kDa) showed 100% release with minimal impurity formation (<10%). The high molecular weight PLGA 50∶50 microspheres (28 kDa) displayed only 70% cumulative release in acetate buffer with significant impurity formation (∼24%). In PBS (pH 7.4), on the other hand, only 50% release was observed with the same low molecular weight batches (PLGA 50∶50, PLGA 85∶15, and PLA) with higher percentages of hydrophobic impurity formation (ie, 40%, 26%, and 10%, respectively). In addition, in PBS, the high molecular weight PLGA 50∶50 microspheres showed only 20% drug release with ∼60% mean impurity content. The chemically modified peptide impurities inside microspheres were structurally confirmed through Fourier transform-mass spectrometry (FT-MS) and liquid chromatography/mass spectrometry (LC-MS/MS) analyses after extraction procedures. The adduct compounds were identified as covalently modified conjugates of octreotide with lactic and glycolic acid monomers within polymeric microspheres. The data suggest that due to steric hindrance factors, polymers with greater lactide content were less amenable to the formation of adduct impurities compared with PLGA 50∶50 copolymers

In vivo release kinetics of octreotide acetate from experimental polymeric microsphere formulations using oil/water and oil/oil processes

The purpose of the present study was to characterize the in vivo release kinetics of octreotide acetate from microsphere formulations designed to minimize peptide acylation and improve drug stability. Microspheres were prepared by a conventional oil/wate (o/w) method or an experimental oil/oil (o/o) dispersion technique. The dosage forms were administered subcutaneously to a rat animal model, and serum samples were analyzed by radioimmunoassay over a 2-month period. An averaged kinetic profile from each treatment group, as a result, was treated with fractional differential equations. The results indicated that poly(l-lactide) microspheres prepared by the o/o dispersion technique provided lower area under the curve (AUC) values during the initial diffusion-controlled release phase, 7.79 ng×d/mL, versus 75.8 ng/sxd/mL for the o/w batch. During the subsequent erosion-controlled release phase, on the other hand, the o/o technique yielded higher AUC values, 123 ng×d/mL, versus 42.2 ng×d/mL for the o/w batch. The differences observed between the 2 techniques were attributed to the site of drug incorporation during the manufacturing process, given that microspheres contain both porous hydrophilic channels and dense hydrophobic matrix regions. An o/o dispersion technique was therefore expected to produce microspheres with lower incorporation in the aqueous channels, which are responsible for diffusion-mediated drug release

A model-dependent approach to correlate accelerated with real-time release from biodegradable microspheres

The purpose of this study was to determine the feasibility of applying accelerated in vitro release testing to correlate or predict long-term in vitro release of leuprolide poly(lactideco-glycolide) microspheres. Peptide release was studied using a dialysis technique at 37°C and at elevated temperatures (50°C–60°C) in 0.1 M phosphate buffered saline (PBS) pH 7.4 and 0.1 M acetate buffer pH 4.0. The data were analyzed using a modification, of the Weibull equation. Peptide release was temperature dependent and complete within 30 days at 37°C and 3 to 5 days at the elevated temperatures. In vitro release profiles at the elevated temperatures correlated well with release at 37°C. The shapes of the release profiles at all temperatures were similar. Using the modified Weibull equation, an increase in temperature was characterized by an increase in the model parameter, α, a scaling factor for the apparent rate constant. Complete release at 37°C was shortened from ∼30 days to 5 days at 50°C, 3.5 days at 55°C, 2.25 days at 60°C in PBS pH 7.4, and 3 days at 50°C in acetate buffer pH 4.0. Values for the model parameter β indicated that the shape of the release profiles at 55°C in PBS pH 7.4 (2.740) and 50°C in 0.1 M acetate buffer pH 4.0 (2.711) were similar to that at 37°C (2.577). The Ea for hydration and erosion were determined to be 42.3 and 19.4 kcal/mol, respectively. Polymer degradation was also temperature dependent and had an Ea of 31.6 kcal/mol. Short-term in vitro release studies offer the possibility of correlation with long-term release, thereby reducing the time and expense associated with longterm studies. Accelerated release methodology could be useful in the prediction of long-term release from extended release microsphere dosage forms and may serve as a quality control tool for the release of clinical or commercial batches

Development of a dialysis in vitro release method for biodegradable microspheres

The purpose of this research was to develop a simple and convenient in vitro release method for biodegradable microspheres using a commercially available dialyzer. A 25 KD MWCO Float-a-Lyzer was used to evaluate peptide diffusion at 37°C and 55°C in different buffers and assess the effect of peptide concentration. In vitro release of Leuprolide from PLGA microspheres, having a 1-month duration of action, was assessed using the dialyzer and compared with the commonly used “sample and separate” method with and without agitation. Peptide diffusion through the dialysis membrane was rapid at 37°C and 55°C in all buffers and was independent of peptide concentration. There was no detectable binding to the membrane under the conditions of the study. In vitro release of Leuprolide from PLGA microspheres was tri-phasic and was complete in 28 days with the dialysis technique. With the sample and separate technique, linear release profiles were obtained with complete release occurring under conditions of agitation. Diffusion through the dialysis membrane was sufficiently rapid to qualify the Float-a-Lyzer for an in vitro release system for microparticulate dosage forms. Membrane characteristics render it useful to study drug release under real-time and accelerated conditions