34 research outputs found

    Applications of Artificial Intelligence Techniques in Optimizing Drilling

    Get PDF
    Artificial intelligence has transformed the industrial operations. One of the important applications of artificial intelligence is reducing the computational costs of optimization. Various algorithms based on their assumptions to solve problems have been presented and investigated, each of which having assumptions to solve the problems. In this chapter, firstly, the concept of optimization is fully explained. Then, an artificial bee colony (ABC) algorithm is used on a case study in the drilling industry. This algorithm optimizes the problem of study in combination with ANN modeling. At the end, various models are fully developed and discussed. The results of the algorithm show that by better understanding the drilling data, the conditions can be improved

    Numerical Investigation of Closed-Form Solutions for Seismic Design of a Circular Tunnel Lining (by Quasi-Static Method)

    Get PDF
    In this paper, four known analytical methods including Wang (1993), Penzien (2000), Park et al. (2009), and Bobet (2010) were Evaluated based on seismic design of circular tunnel in Tehran Metro Line 6. For this purpose, a quasi-static numerical method was applied in the framework of finite difference method (FDM) under the same assumptions. In both numerical and analytical methods, to consider the nonlinear behavior of soil, linear equivalent properties of soil derived from ground analysis were incorporated in EERA software. obtained results shown that the Park’s analytical solution under various conditions of interaction between the tunnel lining and soil provides very close results to the of numerical modeling. Afterward, a comprehensive validation was performed to assess the impact of the rigidity of the surrounding ground and the maximum shear strain value. In this regard, several earthquake scenarios with different shear wave rates were used to achieve a wide range of flexibility ratio (F) and maximum shear strain. The results showed a significant difference between the results of Penzine’s and Bobet’s methods under the no-slip conditions and those of numerical analyses for a certain range of flexibility and shear strain ratios. In the final part of the paper, a quasi-static seismic numerical study was performed under realistic soil-structure interaction conditions to illustrate the importance of the actual interaction between the tunnel lining and surrounding soil. The results showed that the actual interaction conditions governing estimation of the axial force play a very important role. Also, it was found that Park’s solution, because of the ability to consider the slip at the interface provides results very close to those of the numerical modeling. In contrast, one of the serious limitations of the other analytical methods is their inability to simulate the slip interface between the tunnel lining and soil

    Effects of a proper feature selection on prediction and optimization of drilling rate using intelligent techniques

    Get PDF
    One of the important factors during drilling times is the rate of penetration (ROP), which is controlled based on different variables. Factors affecting different drillings are of paramount importance. In the current research, an attempt was made to better recognize drilling parameters and optimize them based on an optimization algorithm. For this purpose, 618 data sets, including RPM, flushing media, and compressive strength parameters, were measured and collected. After an initial investigation, the compressive strength feature of samples, which is an important parameter from the rocks, was used as a proper criterion for classification. Then using intelligent systems, three different levels of the rock strength and all data were modeled. The results showed that systems which were classified based on compressive strength showed a better performance for ROP assessment due to the proximity of features. Therefore, these three levels were used for classification. A new artificial bee colony algorithm was used to solve this problem. Optimizations were applied to the selected models under different optimization conditions, and optimal states were determined. As determining drilling machine parameters is important, these parameters were determined based on optimal conditions. The obtained results showed that this intelligent system can well improve drilling conditions and increase the ROP value for three strength levels of the rocks. This modeling system can be used in different drilling operations

    A novel feature selection approach based on tree models for evaluating the punching shear capacity of steel fiber-reinforced concrete flat slabs

    Get PDF
    When designing flat slabs made of steel fiber-reinforced concrete (SFRC), it is very important to predict their punching shear capacity accurately. The use of machine learning seems to be a great way to improve the accuracy of empirical equations currently used in this field. Accordingly, this study utilized tree predictive models (i.e., random forest (RF), random tree (RT), and classification and regression trees (CART)) as well as a novel feature selection (FS) technique to introduce a new model capable of estimating the punching shear capacity of the SFRC flat slabs. Furthermore, to automatically create the structure of the predictive models, the current study employed a sequential algorithm of the FS model. In order to perform the training stage for the proposed models, a dataset consisting of 140 samples with six influential components (i.e., the depth of the slab, the effective depth of the slab, the length of the column, the compressive strength of the concrete, the reinforcement ratio, and the fiber volume) were collected from the relevant literature. Afterward, the sequential FS models were trained and verified using the above-mentioned database. To evaluate the accuracy of the proposed models for both testing and training datasets, various statistical indices, including the coefficient of determination (R2) and root mean square error (RMSE), were utilized. The results obtained from the experiments indicated that the FS-RT model outperformed FS-RF and FS-CART models in terms of prediction accuracy. The range of R2 and RMSE values were obtained as 0.9476–0.9831 and 14.4965–24.9310, respectively; in this regard, the FS-RT hybrid technique demonstrated the best performance. It was concluded that the three hybrid techniques proposed in this paper, i.e., FS-RT, FS-RF, and FS-CART, could be applied to predicting SFRC flat slabs

    Application of several optimization techniques for estimating TBM advance rate in granitic rocks

    Get PDF
    https://www.sciencedirect.com/science/article/pii/S1674775518303056This study aims to develop several optimization techniques for predicting advance rate of tunnel boring machine (TBM) in different weathered zones of granite. For this purpose, extensive field and laboratory studies have been conducted along the 12,649 m of the Pahang – Selangor raw water transfer tunnel in Malaysia. Rock properties consisting of uniaxial compressive strength (UCS), Brazilian tensile strength (BTS), rock mass rating (RMR), rock quality designation (RQD), quartz content (q) and weathered zone as well as machine specifications including thrust force and revolution per minute (RPM) were measured to establish comprehensive datasets for optimization. Accordingly, to estimate the advance rate of TBM, two new hybrid optimization techniques, i.e. an artificial neural network (ANN) combined with both imperialist competitive algorithm (ICA) and particle swarm optimization (PSO), were developed for mechanical tunneling in granitic rocks. Further, the new hybrid optimization techniques were compared and the best one was chosen among them to be used for practice. To evaluate the accuracy of the proposed models for both testing and training datasets, various statistical indices including coefficient of determination (R2), root mean square error (RMSE) and variance account for (VAF) were utilized herein. The values of R2, RMSE, and VAF ranged in 0.939–0.961, 0.022–0.036, and 93.899–96.145, respectively, with the PSO-ANN hybrid technique demonstrating the best performance. It is concluded that both the optimization techniques, i.e. PSO-ANN and ICA-ANN, could be utilized for predicting the advance rate of TBMs; however, the PSO-ANN technique is superior

    Numerical Model Validation for Detection of Surface Displacements over Twin Tunnels from Metro Line 1 in the Historical Area of Seville (Spain)

    Get PDF
    In order to solve connectivity problems in metropolitan areas, the development of underground metro lines constitutes an unquestionable requirement. However, the construction work thereof encounters unfavourable circumstances when surface excavations must be carried out that cross historical areas of the city, due to the need to control surface movements. The design of the metro in the city of Seville (Spain) from 2004 to 2006 provides a representative example of this situation and triggered major upheavals that exerted repercussions on historical buildings. For these reasons, the excavation stages of Line 1 of this metro have been simulated by numerical methods using FLAC3D software and validated with the results provided by the real conditions. Consequently, various surface settlements have been evaluated by taking not only variates of the main parameters that characterise the soil of Seville, but also of the various load situations and excavation conditions. Notable results have been achieved through calibration of 54 variants of the same model corresponding to Line 1, and their comparison with the real results obtained in nine critical areas of the itinerary. The results obtained have made it possible to determine the effects of excavation on the subsoil of the city of Seville with great accuracy, since the percentage error of calculated vertical surface movements varies from 0.1% to 5.3%

    Genetic prediction of ICU hospitalization and mortality in COVID-19 patients using artificial neural networks

    Get PDF
    There is an unmet need of models for early prediction of morbidity and mortality of Coronavirus disease-19 (COVID-19). We aimed to a) identify complement-related genetic variants associated with the clinical outcomes of ICU hospitalization and death, b) develop an artificial neural network (ANN) predicting these outcomes and c) validate whether complement-related variants are associated with an impaired complement phenotype. We prospectively recruited consecutive adult patients of Caucasian origin, hospitalized due to COVID-19. Through targeted next-generation sequencing, we identified variants in complement factor H/CFH, CFB, CFH-related, CFD, CD55, C3, C5, CFI, CD46, thrombomodulin/THBD, and A Disintegrin and Metalloproteinase with Thrombospondin motifs (ADAMTS13). Among 381 variants in 133 patients, we identified 5 critical variants associated with severe COVID-19: rs2547438 (C3), rs2250656 (C3), rs1042580 (THBD), rs800292 (CFH) and rs414628 (CFHR1). Using age, gender and presence or absence of each variant, we developed an ANN predicting morbidity and mortality in 89.47% of the examined population. Furthermore, THBD and C3a levels were significantly increased in severe COVID-19 patients and those harbouring relevant variants. Thus, we reveal for the first time an ANN accurately predicting ICU hospitalization and death in COVID-19 patients, based on genetic variants in complement genes, age and gender. Importantly, we confirm that genetic dysregulation is associated with impaired complement phenotype.- Pfizer Pharmaceuticals(undefined

    Various effective factors on peak uplift resistance of pipelines in sand: a comparative study

    No full text
    A considerable attention to failure of pipelines should be paid to increase the uplift resistance of pipelines and it can be achieved by increasing the burial depth or utilizing soil improvement methods. The purpose of this study is to investigate the uplift resistance of buried pipelines in various conditions. In this regard, 17 small-scale laboratory tests were conducted to survey the roles of pipeline diameter, burial depth, geogrid length, and the number of geogrid layers, on the peak uplift resistance (PUR) in loose sand. Results of experimental tests clearly showed that burial depth and pipeline diameter affect the uplift resistance results directly and also revealed that the number of geogrid layers does not affect the PUR results, noticeably. However, when the residual PUR values are considered, the use of two geogrid layers instead of one geogrid layer for the same length is of advantage. On the other hand, ‘PLAXIS 3D TUNNEL’ and ‘ABAQUS’ programmes were used to analyse and verify 17 experimental results. As a result, average error values of 11.56 and 18.43 were obtained for ABAQUS and PLAXIS 3D TUNNEL programmes, respectively, which show that ABAQUS programme can simulate PUR results of pipeline with a higher degree of accuracy

    Evaluating Slope Deformation of Earth Dams Due to Earthquake Shaking Using MARS and GMDH Techniques

    No full text
    Assessing the behavior of earth dams under dynamic loads is one of the most significant problems with the design of such large structures. The purpose of this study is to provide new models for predicting dam dispersion in real earthquake conditions. In the first phase, 103 real cases of deformation in earth dams were collected and analyzed due to earthquakes that occurred over recent years. Using nonlinear and machine learning techniques, i.e., group method of data handling (GMDH) and multivariate adaptive regression splines (MARS), two models for prediction of the slope deformation in earth dams under the various types of earthquakes were applied and developed. The main parameters used in these simulation techniques were earthquake magnitude (Mw), fundamental period ratio (Td/Tp), yield acceleration ratio (ay/amax) as inputs and value of slope deformation (Dave) as output. Finally, in order to check the accuracy of the results of the new models, a comparison was made with the previous relations and models in seismic conditions for the slope deformation in earth dams. The results showed that the MARS model, which is able to provide a mathematical equation, has a better result than the GMDH model. These new models are recommended to be used for future analyses based on their flexible capabilities

    A combination of artificial bee colony and neural network for approximating the safety factor of retaining walls

    No full text
    This paper presents intelligent models for solving problems related to retaining walls in geotechnics. To do this, safety factors of 2800 retaining walls were modeled and recorded considering different effective parameters of retaining walls (RWs), i.e., height of the wall, wall thickness, friction angle, density of the soil, and density of the rock. Two intelligent methodologies including a pre-developed artificial neural network (ANN) and a combination of artificial bee colony (ABC) and ANN were selectively developed to approximate safety factors of RWs. In the new network, ABC was used to optimize weight and biases of ANN to receive higher level of accuracy and performance prediction. Many ANN and ABC–ANN models were built considering the most influential parameters of them and their performances were evaluated using coefficient of determination (R 2 ) and root mean square error (RMSE) performance indices. After developing the mentioned models, it was found that the new hybrid model is able to increase network performance capacity significantly. For instance, R 2 values of 0.982 and 0.985 for training and testing of ABC–ANN model, respectively, compared to these values of 0.920 and 0.924 for ANN model showed that the new hybrid model can be introduced as a capable enough technique in the field of this study for estimating safety factors of RWs
    corecore