369 research outputs found
Effect of a titanium nitride interlayer on the densification, properties and microstructure of cermets based on alumina and nickel. Part 2: Microstructures
SEM microstructural analyses in conjunction with EDX and TEM microstructural analyses have been conducted with cermets based on nickel and alumina, the latter as such and with a chemical-vapour-deposited titanium nitride layer. It has been proved that there is excellent bonding at both the Al2O3/TiN and the TiN/Ni interface, whereas Al2O3 and Ni do not adhere to each other. This is the reason for the observation that the mechanical properties as well as the densification of cermets consisting of Al2O3 and Ni are enhanced by applying a TiN interlayer between the ceramic phase and the metallic phase
The influence of additives on the current carrying capacity of bulk YBa2Cu3OX
We studied the influence of using different powders and several additives on the shaping process and critical current density of sintered bulk YBa2Cu3OX. It was found that all additives used facilitated the shaping process. Silver and most organic additives influenced the critical current density only little, Zinc reduced it to zero, but an ethylenebisstearoylamide compound doubled the critical current density as compared to samples without additives
Sensitivity analysis of the dynamic CO2 storage capacity estimate for the Bunter Sandstone of the UK Southern North Sea
Carbon capture and storage (CCS) in subsurface reservoirs has been identified as a potentially cost-effective way to reduce CO2 emissions to the atmosphere. Global emissions reductions on the gigatonne scale using CCS will require regional or basin-scale deployment of CO2 storage in saline aquifers. Thus the evaluation of both the dynamic and ultimate CO2 storage capacity of formations is important for policy makers to determine the viability of CCS as a pillar of the greenhouse gas mitigation strategy in a particular region. We use a reservoir simulation model representing the large-scale Bunter Sandstone in the UK Southern North Sea to evaluate the dynamics and sensitivities of regional CO2 plume transport and storage. At the basin-scale, we predict hydrogeological changes in the storage reservoir in response to multiple regional carbon sequestration development scenarios. We test the sensitivity of injection capacity to a range of target CO2 injection rates and fluctuations in CO2 supply. Model sensitivities varying the target injection rates indicate that in the absence of pressure management up to 3.7 Gt of CO2 can be stored in the Bunter region over 50 years given the pressure constraints set to avoid fracturing the formation. Long-term (approx. 1000 years), our results show that up to 16 Gt of CO2 can be stored in the Bunter region without pressure management. With pressure management, the estimate rises to 32 Gt. However, consideration must be given to the additional operational and economic requirements of pressure management using brine production
The Charge Form Factor of the Neutron at Low Momentum Transfer from the Reaction
We report new measurements of the neutron charge form factor at low momentum
transfer using quasielastic electrodisintegration of the deuteron.
Longitudinally polarized electrons at an energy of 850 MeV were scattered from
an isotopically pure, highly polarized deuterium gas target. The scattered
electrons and coincident neutrons were measured by the Bates Large Acceptance
Spectrometer Toroid (BLAST) detector. The neutron form factor ratio
was extracted from the beam-target vector asymmetry
at four-momentum transfers , 0.20, 0.29 and 0.42
(GeV/c).Comment: 5 pages, 3 figures, submitted to Phys. Rev. Let
Measurement of the proton electric to magnetic form factor ratio from \vec ^1H(\vec e, e'p)
We report the first precision measurement of the proton electric to magnetic
form factor ratio from spin-dependent elastic scattering of longitudinally
polarized electrons from a polarized hydrogen internal gas target. The
measurement was performed at the MIT-Bates South Hall Ring over a range of
four-momentum transfer squared from 0.15 to 0.65 (GeV/c).
Significantly improved results on the proton electric and magnetic form factors
are obtained in combination with previous cross-section data on elastic
electron-proton scattering in the same region.Comment: 4 pages, 2 figures, submitted to PR
Spin-Momentum Correlations in Quasi-Elastic Electron Scattering from Deuterium
We report on a measurement of spin-momentum correlations in quasi-elastic
scattering of longitudinally polarized electrons with an energy of 720 MeV from
vector-polarized deuterium. The spin correlation parameter was
measured for the reaction for missing
momenta up to 350 MeV/ at a four-momentum transfer squared of 0.21
(GeV/c). The data give detailed information about the spin structure of the
deuteron, and are in good agreement with the predictions of microscopic
calculations based on realistic nucleon-nucleon potentials and including
various spin-dependent reaction mechanism effects. The experiment demonstrates
in a most direct manner the effects of the D-state in the deuteron ground-state
wave function and shows the importance of isobar configurations for this
reaction.Comment: 4 pages, 3 figures, submitted to Phys. Rev. Lett. for publicatio
Measurement of Angular Distributions and R= sigma_L/sigma_T in Diffractive Electroproduction of rho^0 Mesons
Production and decay angular distributions were extracted from measurements
of exclusive electroproduction of the rho^0(770) meson over a range in the
virtual photon negative four-momentum squared 0.5< Q^2 <4 GeV^2 and the
photon-nucleon invariant mass range 3.8< W <6.5 GeV. The experiment was
performed with the HERMES spectrometer, using a longitudinally polarized
positron beam and a ^3He gas target internal to the HERA e^{+-} storage ring.
The event sample combines rho^0 mesons produced incoherently off individual
nucleons and coherently off the nucleus as a whole. The distributions in one
production angle and two angles describing the rho^0 -> pi+ pi- decay yielded
measurements of eight elements of the spin-density matrix, including one that
had not been measured before. The results are consistent with the dominance of
helicity-conserving amplitudes and natural parity exchange. The improved
precision achieved at 47 GeV,
reveals evidence for an energy dependence in the ratio R of the longitudinal to
transverse cross sections at constant Q^2.Comment: 15 pages, 15 embedded figures, LaTeX for SVJour(epj) document class
Revision: Fig. 15 corrected, recent data added to Figs. 10,12,14,15; minor
changes to tex
- …