Tunable subpicosecond electron bunch train generation using a transverse-to-longitudinal phase space exchange technique

We report on the experimental generation of a train of subpicosecond electron bunches. The bunch train generation is accomplished using a beamline capable of exchanging the coordinates between the horizontal and longitudinal degrees of freedom. An initial beam consisting of a set of horizontally-separated beamlets is converted into a train of bunches temporally separated with tunable bunch duration and separation. The experiment reported in this Letter unambiguously demonstrates the conversion process and its versatility.Comment: 4 pages, 5 figures, 1 table; accepted for publication in PR

Upgrades of beam diagnostics in support of emittance-exchange experiments at the Fermilab A0 photoinjector

The possibility of using electron beam phase space manipulations to support a free-electron laser accelerator design optimization has motivated our research. An on-going program demonstrating the exchange of transverse horizontal and longitudinal emittances at the Fermilab A0 photoinjector has benefited recently from the upgrade of several of the key diagnostics stations. Accurate measurements of these properties upstream and downstream of the exchanger beamline are needed. Improvements in the screen resolution term and reduced impact of the optical system's depth-of-focus by using YAG:Ce single crystals normal to the beam direction will be described. The requirement to measure small energy spreads (<10 keV) in the spectrometer and the exchange process which resulted in bunch lengths less than 500 fs led to other diagnostics performance adjustments and upgrades as well. A longitudinal to transverse exchange example is also reported.Comment: 16 p

First observation of the exchange of transverse and longitudinal emittances

An experimental program to demonstrate a novel phase space manipulation in which the horizontal and longitudinal emittances of a particle beam are exchanged has been completed at the Fermilab A0 Photoinjector. A new beamline, consisting of a TM110 deflecting mode cavity flanked by two horizontally dispersive doglegs has been installed. We report on the first direct observation of transverse and longitudinal emittance exchange

Tako-tsubo cardiomyopathy after administration of ergometrine following elective caesarean delivery: a case report

<p>Abstract</p> <p>Introduction</p> <p>Tako-tsubo cardiomyopathy (stress-induced cardiomyopathy or transient left ventricular ballooning) is characterized by clinical suspicion of an acute myocardial infarction with transient apical or midventricular dyskinesia of the left ventricle without significant coronary stenosis on angiography. The etiology of this disease remains obscure. One of the possible causes is myocardial ischemia induced by coronary vasospasm due to sympathetic activation. It has been hypothesized that the application of ergometrine could induce tako-tsubo cardiomyopathy.</p> <p>Case presentation</p> <p>We report the case of a 28-year-old Turkish woman who developed tako-tsubo cardiomyopathy after administration of ergometrine for release of placenta and prevention of bleeding during the post-partum phase in the course of an elective caesarean delivery. Tako-tsubo cardiomyopathy was diagnosed by echocardiography and urgent cardiac magnetic resonance imaging. A coronary angiography was not performed because of the absence of myocardial necrosis or ischemia and signs of myocarditis on cardiac magnetic resonance imaging.</p> <p>Conclusion</p> <p>This life-threatening disease should be excluded in the differential diagnosis by comparing the symptoms with those of typical heart failure, particularly after use of ergometrine.</p

A copper 3.9 GHz TM110 cavity for emittance exchange

An experiment is being developed at the FNAL Photoinjector Lab to demonstrate the exchange of longitudinal emittance with a transverse horizontal emittance. The longitudinal electric field of a TM{sub 110} cavity vanishes on axis and increases linearly with transverse displacement. This 'shearing' electric field is pivotal to the exchange. The design of this TM{sub 110} cavity is a variant of the Fermilab 3.9 GHz superconducting deflecting mode cavity; however, the cavity was constructed of OFHC copper. The authors report on the construction, field flatness, polarization and high power testing of a TM{sub 110} cavity

Business Analytics in (a) Blink

The Blink project’s ambitious goal is to answer all Business Intelligence (BI) queries in mere seconds, regardless of the database size, with an extremely low total cost of ownership. Blink is a new DBMS aimed primarily at read-mostly BI query processing that exploits scale-out of commodity multi-core processors and cheap DRAM to retain a (copy of a) data mart completely in main memory. Additionally, it exploits proprietary compression technology and cache-conscious algorithms that reduce memory bandwidth consumption and allow most SQL query processing to be performed on the compressed data. Blink always scans (portions of) the data mart in parallel on all nodes, without using any indexes or materialized views, and without any query optimizer to choose among them. The Blink technology has thus far been incorp

22^{22}Na Activation Level Measurements of Fused Silica Rods in the LHC Target Absorber for Neutrals (TAN) Compared to FLUKA Simulations

The Target Absorbers for Neutrals (TANs) are located in a high-intensity radiation environment inside the tunnel of the Large Hadron Collider (LHC). TANs are positioned about $140$ m downstream from the beam interaction points. Seven $40$ cm long fused silica rods with different dopant specifications were irradiated in the TAN by the Beam RAte of Neutrals (BRAN) detector group during $p$+$p$ data taking from 2016 to 2018 at the LHC. The peak dose delivered to the fused silica rods was $18$ MGy. We report measurements of the $^{22}$Na activation of the fused silica rods carried out at the University of Illinois at Urbana-Champaign and Argonne National Laboratory. At the end of the irradiation campaign, the maximum $^{22}$Na activity observed was $A=21$ kBq$/{\rm cm^3}$ corresponding to a density, $\rho= 2.5\times 10^{12} /{\rm cm^3}$, of $^{22}$Na nuclei. FLUKA Monte Carlo simulations have been performed by the CERN FLUKA team to estimate $^{22}$Na activities for the irradiated BRAN rod samples. The simulations reproduce the $^{22}$Na activity profile measured along the rods, with a 35% underestimation of the experimental measurement results.Comment: 11 pages, 14 figures, to be submitted to PRA

Capture cavity II results at FNAL

As part of the research and development towards the International Linear Collider (ILC), several test facilities have been developed at Fermilab. This paper presents the latest Low Level RF (LLRF) results obtained with Capture Cavity II (CCII) at the ILC Test Accelerator (ILCTA) test facility. The main focus will be on controls and RF operations using the SIMCON based LLRF system developed in DESY [1]. Details about hardware upgrades and future work will be discussed

Optical Transmission Characterization of Fused Silica Materials Irradiated at the CERN Large Hadron Collider

The Target Absorbers for Neutrals (TANs) represent one of the most radioactive regions in the Large Hadron Collider (LHC). Seven 40 cm long fused silica rods with different dopant specifications, manufactured by Heraeus, were irradiated in one of the TANs located around the ATLAS experiment by the Beam RAte of Neutrals (BRAN) detector group. This campaign took place during the Run 2 p+p data taking, which occurred between 2016 and 2018. This paper reports a complete characterization of optical transmission per unit length of irradiated fused silica materials as a function of wavelength (240 nm - 1500 nm), dose (up to 18 MGy), and level of OH and H$_2$ dopants introduced in the manufacturing process. The dose delivered to the rods was estimated using Monte Carlo simulations performed by the CERN FLUKA team.Comment: 29 pages, 15 figures, to be submitted to NIM-