Biologically modified microelectrode sensors provide enhanced sensitivity for detection of nucleic acid sequences from Mycobacterium tuberculosis

This paper describes improved sensitivity when using biosensors based on microfabricated microelectrodes to detect DNA, with the goal of progressing towards a low cost and mass manufacturable assay for antibiotic resistance in tuberculosis (TB). The microelectrodes gave a near 20 times improvement in sensitivity compared to polycrystalline macroelectrodes. In addition, experimental parameters such as redox mediator concentration and experimental technique were investigated and optimised. It was found that lower concentrations of redox mediator gave higher signal changes when measuring hybridisation events and, at these lower concentrations, square wave voltammetry was more sensitive and consistent than differential pulse voltammetry. Together, this paper presents a quantifiable comparison of macroelectrode and microelectrode DNA biosensors. The final assay demonstrates enhanced sensitivity through reduction of sensor size, reduction of redox mediator concentration and judicious choice of detection technique, therefore maintaining manufacturability for incorporation into point of care tests and lab-on-a-chip devices

Investigation of the effect of channel structure and flow rate on on-chip bacterial lysis

Successful lysis of cells/microorganisms is a key step in the sample preparation in fields like molecular biology, bioengineering, and biomedical engineering. This study therefore aims to investigate the lysis of bacteria on-chip and its dependence on both microfluidic channel structure and flow rate. Effects of temperature on lysis on-chip were also investigated. To perform these investigations, three different microfluidic chips were designed and produced (straight, zigzag and circular configurations), while the length of the channels were kept constant. As an exemplary case, Mycobacterium smegmatis was chosen to represent the acid-fast bacteria. Bacterial suspensions of 1.5 McFarland were injected into the chips at various flow rates (0.6-8 ll/min) either at room temperature or 500 C. In order to understand the on-chip lysis performance fully, off-chip experiments were carried out at durations which are equal to those bacteria spent in the channel from inlet to the outlet at different flow rates. We also performed COMSOL multiphysics program simulations to evaluate further the effect of the applied parameters. As a result, we found that the structure and the flow rate do not affect lysis over all in all investigated channel types, however on-chip experiments at room temperature produced more effective lysis compared to the on-chip and the off-chip samples performed at higher temperatures. Interestingly on-chip experiments at higher tempratures do not result in effective lysis

Isolation and identification of mycobacteria responsible for tuberculosis of dromedaries in Algeria

peer reviewe

Label-free molecular detection of antibiotic susceptibility for Mycobacterium smegmatis using a low cost electrode format

Today, the emergence of antibiotic resistance in pathogenic bacteria is considered an important problem for society. Excessive consumption of antibiotics, long-term treatments, and inappropriate prescriptions continually increase the severity of the problem. Improving antibiotic stewardship requires improved diagnostic testing, and, therefore, in vitro antibiotic susceptibility testing is becoming increasingly important. This research details the development of an antibiotic susceptibility test for Mycobacterium smegmatis using streptomycin as antibiotics. This strain was selected because it is a member of the slow growing Mycobacterium genus and serves as a useful surrogate organism for M. tuberculosis. A commercially available and low-cost screen-printed gold electrode in combination with a specifically developed nucleic acid probe sequence for the 16SrRNA region of the mycobacterial genome was employed to monitor M. smegmatis nucleic acid sequences using the techniques of square-wave voltammetry and electrochemical impedance spectroscopy. The results show that it was possible to detect M. smegmatis sequences and distinguish antibiotic-treated cells from untreated cells with a label-free molecular detection. As a result, the in vitro antibiotic susceptibility test revealed that M. smegmatis showed sensitivity to streptomycin after a 24-H incubation, with the developed protocol representing a potential approach to determining antibiotic susceptibility more quickly and economically than current methods

Multiplex-PCR-based screening and computational modeling of virulence factors and t-cell mediated immunity in helicobacter pylori infections for accurate clinical diagnosis

The outcome of H. pylori infection is closely related with bacteria's virulence factors and host immune response. The association between T cells and H. pylori infection has been identified, but the effects of the nine major H. pylori specific virulence factors; cagA, vacA, oipA, babA, hpaA, napA, dupA, ureA, ureB on T cell response in H. pylori infected patients have not been fully elucidated. We developed a multiplex- PCR assay to detect nine H. pylori virulence genes with in a three PCR reactions. Also, the expression levels of Th1, Th17 and Treg cell specific cytokines and transcription factors were detected by using qRT-PCR assays. Furthermore, a novel expert derived model is developed to identify set of factors and rules that can distinguish the ulcer patients from gastritis patients. Within all virulence factors that we tested, we identified a correlation between the presence of napA virulence gene and ulcer disease as a first data. Additionally, a positive correlation between the H. pylori dupA virulence factor and IFN-γ, and H. pylori babA virulence factor and IL-17 was detected in gastritis and ulcer patients respectively. By using computer-based models, clinical outcomes of a patients infected with H. pylori can be predicted by screening the patient's H. pylori vacA m1/m2, ureA and cagA status and IFN-γ (Th1), IL-17 (Th17), and FOXP3 (Treg) expression levels. Herein, we report, for the first time, the relationship between H. pylori virulence factors and host immune responses for diagnostic prediction of gastric diseases using computer—based models

Dio-sensimedia: a novel culture medium for rapid detection of extended spectrum β-lactamases

BACKGROUND: Resistance to contemporary broad-spectrum β-lactams, mediated by extended-spectrum β-lactamases (ESBL), is an increasing problem worldwide. Many of the emerging antimicrobial resistance problems of this decade have been characterized by difficulty in the recognition of resistance in the laboratory, particularly by rapid susceptibility test methods. The plasmid-encoded ESBL represent such a resistance phenomenon that is difficult to recognize. We compared Dio-Sensimedia-ES (DSM-ES; Diomed, Istanbul, Turkey) and Mueller-Hinton (MH) agar in the double-disk synergy test (DDST) as a novel rapid system for detecting ESBL directly from bacterial culture. METHODS: Sixty ESBL-producing Klebsiella pneumoniae isolates cultured from blood (30), endotracheal aspirates (20), urine (5) and pus (5), as well as 40 Escherichia coli isolates cultured from endotracheal aspirates (15), urine (10), blood (8) and pus (7) were studied. Isolates positive for ESBL by the combined disk tests were tested with the DDST using MH and DSM-ES agar to detect ESBL-mediated resistance in K. pneumoniae and E. coli. DSM-ES agar was also used to determine the susceptibility of Enterobacteriaceae and staphylococci. RESULTS: Among 60 ESBL-producing K. pneumoniae isolates, 59 (98.3%) were identified as ESBL-positive by the DDST using MH, and 58 (96.6%), using DSM-ES agar. Of 40 ESBL-producing E. coli isolates, 38 (95%) were ESBL-positive by the DDST on MH agar, and 37 (92.5%), on DSM-ES agar. The average incubation period required for ESBL detection by the DDST on DSM-ES agar was 4 hours. CONCLUSIONS: Since the DDST results were available within 4 hours when DSM-ES agar was used, the use of this media may significantly lower the length of hospital stay, the total cost for patient care and even the mortality rate by fascilitating early treatment against ESBL-producing organisms

Performance of the Genotype® MTBDRPlus assay in the diagnosis of tuberculosis and drug resistance in Samara, Russian Federation

<p>Abstract</p> <p>Background</p> <p>Russia is a high tuberculosis (TB) burden country with a high prevalence of multidrug resistant tuberculosis (MDRTB). Molecular assays for detection of MDRTB on clinical specimens are not widely available in Russia.</p> <p>Results</p> <p>We performed an evaluation of the GenoType^®MTBDRplus assay (HAIN Lifescience GmbH, Germany) on a total of 168 sputum specimens from individual patients at a public health laboratory in Central Russia, as a model of a middle income site in a region with high levels of drug resistance. Phenotypic drug resistance tests (DST) were performed on cultures derived from the same sputum specimens using the BACTEC 960 liquid media system.</p> <p>Interpretable GenoType^®MTBDRplus results were obtained for 154(91.7%) specimens with readability rates significantly higher in sputum specimens graded 2+ and 3+ compared to 1+ (RR = 1.17 95%CI 1.04–1.32). The sensitivity and specificity of the assay for the detection of rifampicin (RIF) and isoniazid (INH) resistance and MDR was 96.2%, 97.4%, 97.1% and 90.7%, 83.3%, 88.9% respectively. Mutations in codon 531 of the <it>rpoB </it>gene and codon 315 of the <it>katG </it>gene dominated in RIF and INH resistant strains respectively. Disagreements between phenotypical and molecular tests results (12 samples) could be explained by the presence of rare mutations in strains circulating in Russia and simultaneous presence of resistant and sensitive bacilli in sputum specimens (heteroresistance).</p> <p>Conclusion</p> <p>High sensitivity, short turnaround times and the potential for screening large numbers of specimens rapidly, make the GenoType^®MTBDRplus assay suitable as a first-line screening assay for drug resistant TB.</p