pH-Triggered Magnetic-Chitosan Nanogels (MCNs) For Doxorubicin Delivery: Physically vs. Chemically Cross Linking Approach

Purpose: This paper evaluates the impact of cross linking strategy on the characteristics of magnetic chitosan nanogels (MCNs) as targeted drug delivery system for doxorubicin. Methods: Sodium tripolyphosphate (TPP) and glutaraldehyde were used as physical (electrostatic) and chemical (covalent binding) cross-linker agents, respectively. MCNs were characterized by means of X-ray diffraction (XRD), Scanning electron microscopy (SEM), fourier transform infrared (FT-IR) spectroscopy and vibrating sample magnetometer (VSM). Scanning electron microscopy (SEM) indicated the formation of spherical nanostructures with the final average particle size of around 35-40 nm. Results: The finding proved the superparamagnetic properties of the MCNs with relatively high-magnetization values which indicate that the MCNs were enough sensitive to external magnetic fields as a magnetic drug carrier. To understand the differences between the drug delivery properties of chemically and physically cross linked MCNs, the drug release studies were also conducted. Altogether, the results of this study clearly indicate that, however, both MCNs exhibited sustained drug release behaviour, the chemically cross linked MCNs provided enhanced controlled drug release characteristics in comparison to physically cross linked MCNs. Besides, according to the drug release behaviour of MCNs in buffer solutions in two different medium with the pH values of 5.3 and 7.4, it was clear that both nanoparticles exhibited pH sensitivity where the extent of drug release in the acidic media was significantly higher than neutral media. Conclusion: It can be concluded that chemically cross linked MCNs may serve as an ideal carrier for stimuli-triggered and controlled anticancer drug delivery

Polymeric Co-Delivery Systems in Cancer Treatment: An Overview on Component Drugs’ Dosage Ratio Effect

Multiple factors are involved in the development of cancers and their effects on survival rate. Many are related to chemo-resistance of tumor cells. Thus, treatment with a single therapeutic agent is often inadequate for successful cancer therapy. Ideally, combination therapy inhibits tumor growth through multiple pathways by enhancing the performance of each individual therapy, often resulting in a synergistic effect. Polymeric nanoparticles prepared from block co-polymers have been a popular platform for co-delivery of combinations of drugs associated with the multiple functional compartments within such nanoparticles. Various polymeric nanoparticles have been applied to achieve enhanced therapeutic efficacy in cancer therapy. However, reported drug ratios used in such systems often vary widely. Thus, the same combination of drugs may result in very different therapeutic outcomes. In this review, we investigated polymeric co-delivery systems used in cancer treatment and the drug combinations used in these systems for synergistic anti-cancer effect. Development of polymeric co-delivery systems for a maximized therapeutic effect requires a deeper understanding of the optimal ratio among therapeutic agents and the natural heterogenicity of tumors

Biodegradable m-PEG/PCL Core-Shell Micelles: Preparation and Characterization as a Sustained Release Formulation for Curcumin

Purpose: Among the potent anticancer agents, curcumin is known as a very efficacious against many different types of cancer cells, but its clinical applications has been limited because of hydrophobicity, low gastrointestinal absorption, poor bioavailability and rapid metabolism. In this way, a novel micellar delivery system with mPEG–PCL was synthesized and the release profile of the curcumin from the drug-loaded micelles was evaluated. Methods: In this study, curcumin was encapsulated within monomethoxypoly(ethylene glycol)-poly(ε-caprolactone) (mPEG-PCL) micelles through a single-step nano-precipitation method, leading to creation of curcumin-loaded mPEG-PCL (Cur/mPEG-PCL) micelles. Di-block mPEG-PCL copolymers were synthesized and used to prepare micelles. mPEG-PCL copolymer was characterized in vitro by HNMR, FTIR, DSC and GPC techniques. Then, mPEG–PCL copolymers with curcumin were self-assembled into micelles in aqueous solution. The resulting micelles were characterized further by various techniques such as dynamic light scattering (DLS) and atomic force microscopy (AFM). Results: The findings showed the successful formation of smooth and spherical curcumin-loaded micelles. The encapsulation efficiency of curcumin was 88 ± 3.32%. The results of AFM revealed that the micelles have spherical shapes with size of 73.8 nm. The release behavior of curcumin from micelles was compared in different media. In vitro release of curcumin from curcumin-entrapped micelles was followed remarkably sustained profile. The sustained release of drug was hypothetically due to the entrapment of curcumin in core of micelles. Conclusion: The results indicate the successful formulation of curcumin loaded m-PEG/PCL micelles. From the results, iIt can be concluded that curcumin m-PEG-PCL micelles may be considered as an effective treatment strategy for cancer in the future

Simultaneous diagnosis and drug delivery by silymarin-loaded magnetic nanoparticles

Objective(s): The aim of this work was to prepare and characterize magnetic nanoparticles (MNPs) as theranostic system to act simultaneously as drug carrier and MRI contrast agent. Chitosan-coated MNPs (CMNPs) were prepared and loaded with silymarin. Silymarin-loaded CMNPs were characterized with various techniques and their potential as MRI contrast agent was also evaluated. Materials and Methods:The chitosan-coated MNPs were prepared by coprecipitation method and were loaded with silymarin. The synthesized nanoparticles were characterized by various techniques including SEM, TEM, X‐ray diffraction (XRD), FTIR and vibrating sample magnetometer (VSM). In vitro drug release of silymarin was evaluated at 37 ˚C at pH 5.3 and 7.4. Then, their proton relaxivity was evaluated to study the potential of CMNPs as MRI contrast agent in terms of r1 and r2.Results:Silymarin-loaded CMNPs were successfully prepared and characterized by FTIR and XRD techniques. VSM analysis revealed superparamagnetic properties of CMNPs. The release study showed that the maximum drug release accessible for CMNPs in pH=5.3 was higher than pH=7.4. Finally, the r2/r1 value of CMNPs was found to be close to 20 indicating that CMNPs has a strong efficiency as T2 contrast agents for MRI imaging.  Conclusion:The findings demonstrated the potential of CMNPs as efficient MRI contrast agent as well as silymarin drug delivery

Biomaterials coated with zwitterionic polymer brush demonstrated significant resistance to bacterial adhesion and biofilm formation in comparison to brush coatings incorporated with antibiotics

A critical problem with the use of biomaterial implants is associated with bacterial adhesion on the surface of implants and in turn the biofilm formation. Among different strategies that have been reported to resolve this dilemma, surface design combined with both antiadhesive and antimicrobial properties has proven to be highly effective. Physiochemical properties of polymer brush coatings possess non-adhesive capability against bacterial adhesion and create a niche for further functionalization. The current study aims to evaluate the effect of antibiotics incorporated into the polymer brush on bacterial adhesion and biofilm formation. Brushes made of zwitterionic polymers were synthesized, functionalized with vancomycin via both physical and chemical conjugation, and grafted onto the silicon rubber surfaces. Antibacterial and antiadhesive measurements of designed coated biomaterials were mediated through the use of a parallel plate flow chamber against biofilm growth developed by Staphylococcus aureus and Escherichia coli over a period of 24 h. The analysis of biofilm growth on designed coated biomaterials showed that the pristine coated zwitterionic brushes are significantly resistant to bacterial adhesion and biofilm formation but not in the polymer brush coating incorporated with antibiotics.</p

Synthesis and characterization of dextran coated magnetite nanoparticles for diagnostics and therapy

Introduction: Expansion of efficacious theranostic systems is of pivotal significance for medicine and human healthcare. Magnetic nanoparticles (MNPs) are known as drug delivery system and magnetic resonance imaging (MRI) contrast agent. MNPs as drug carriers have attracted significant attention because of the delivery of drugs loaded onto MNPs to solid tumors, maintaining them in the target site by an external electromagnetic field, and subsequently releasing drugs in a controlled manner. On the other hand, it is believed that MNPs possess high potential as MRI contrast agents. The aim of this work was to payload curcumin into dextran coated MNPs and investigate their potential as theranostic systems for controlled drug delivery and MRI imaging. Methods: MNPs were synthesized as a core and coated with dextran as polymeric shell to provide steric stabilization. Curcumin as anticancer drug was selected to be loaded into NPs. To characterize the synthesized NPs, various techniques (e.g., DLS, FESEM, FT-IR, XRD, and VSM) were utilized. In vitro drug release of curcumin was evaluated at 37˚C at the pH value of 5.4 and 7.4.The feasibility of employment of dextran coated MNPs as MRI contrast agents were also studied. Results: Formulations prepared from dextran coated MNPs showed high loading (13%) and encapsulation efficiency (95%). In vitro release study performed in the phosphate-buffered saline (PBS, pH= 7.4, 5.4) revealed that the dextran coated MNPs possess sustained release behavior at least for 4 days with the high extent of drug release in acidic media. Vibrating sample magnetometer (VSM) analysis proved the superparamagnetic properties of the dextran coated MNPs with relatively high-magnetization value indicating that they were sufficiently sensitive to external magnetic fields as magnetic drug carriers. Furthermore, dextran coated MNPs exhibited high potential as T2 contrast agents for MRI. Conclusion: Based on our findings, we propose the dextran coated MNPs as promising nanosystem for the delivery of various drugs such as curcumin and MRI contrast agent