Neutrino helicity asymmetries in leptogenesis

It is pointed out that the heavy singlet neutrinos characteristic of leptogenesis develop asymmetries in the abundances of the two helicity states as a result of the same mechanism that generates asymmetries in the standard lepton sector. Neutrinos and standard leptons interchange asymmetries in collisions with each other. It is shown that an appropriate quantum number, B-L', combining baryon, lepton and neutrino asymmetries, is not violated as fast as the standard B-L. This suppresses the washout effects relevant for the derivation of the final baryon asymmetry. One presents detailed calculations for the period of neutrino thermal production in the framework of the singlet seesaw mechanism.Comment: 11 pages, 1 figure, revtex, matches PRD versio

Scanning Probe Microscopy of DNA on Mica and Graphite

Abstract. Method of modification of highly oriented pyrolytic graphite (HOPG) is proposed for deposition of biological objects especially DNA for scanning probe microscopy. Atomic force microscopy (AFM) images of DNA on HOPG are compared with those on conventional support -mica. The advantages of HOPG as a substrate for DNA for using in STM imaging and DNA mapping are discussed

Synthesis of novel poly(dG)-poly(dG)-poly(dC) triplex structure by Klenow exo(-) fragment of DNA polymerase I

LPNNational Licence

Long range electronic transport in DNA molecules deposited across a disconnected array of metallic nanoparticles

We report in detail our experiments on the conduction of $\lambda$ DNA molecules over a wide range of temperature deposited across slits in a few nanometers thick platinum film. These insulating slits were fabricated using focused ion beam etching and characterized extensively using near field and electron microscopy. This characterization revealed the presence of metallic Ga nanoparticles inside the slits, as a result of the ion etching. After deposition of $\lambda$ DNA molecules, using a protocol that we describe in detail, some of the slits became conducting and exhibited superconducting fluctuations at low temperatures. We argue that the observed conduction was due to transport along DNA molecules, that interacted with the Ga nanoparticles present in the slit. At low temperatures when Ga becomes superconducting, induced superconductivity could therefore be observed. These results indicate that minute metallic particles can easily transfer charge carriers to attached DNA molecules and provide a possible reconciliation between apparently contradictory previous experimental results concerning the length over which DNA molecules can conduct electricity

Morphometric characterization of fibrinogen's αc regions and their role in fibrin self-assembly and molecular organization

© 2017 The Royal Society of Chemistry. The flexible C-terminal parts of fibrinogen's Aα chains named the αC regions have been shown to play a role in fibrin self-assembly, although many aspects of their structure and functions remain unknown. To examine the involvement of the αC regions in the early stages of fibrin formation, we used high-resolution atomic force microscopy to image fibrinogen and oligomeric fibrin. Plasma-purified full-length human fibrinogen or des-αC fibrinogen lacking most of the αC regions, untreated or treated with thrombin, was imaged. Up to 80% of the potentially existing αC regions were visualized and quantified; they were highly heterogeneous in their length and configurations. Conversion of fibrinogen to fibrin was accompanied by an increase in the incidence and length of the αC regions as well as transitions from more compact conformations, such as a globule on a string, to extended and more flexible offshoots. Concurrent dynamic turbidimetry, confocal microscopy, and scanning electron microscopy revealed that trimming of the αC regions slowed down fibrin formation, which correlated with longer protofibrils, thinner fibers, and a denser network. No structural distinctions, except for the incidence of the αC regions, were revealed in the laterally aggregated protofibrils made of the full-length or des-αC fibrinogens, suggesting a pure kinetic effect of the αC regions on the fibrin architecture. This work provides a structural molecular basis for the promoting role of the αC regions in the early stages of fibrin self-assembly and reveals this stage of fibrin formation as a potential therapeutic target to modulate the structure and mechanical properties of blood clots

Ti2NiCu Based Composite Nanotweezers with a Shape Memory Effect and its Use for DNA Bunches 3D Manipulation

The DNA molecules were controllable deposited on graphene and thin graphite films and visualized using AFM. The mechanical micro- and nanotools, such as nanotweezers with shape memory effect controlled by heating were designed and tested. A technique for fabricating a structure with the inclusion of suspended DNA threads and manipulating those using composite nanotweezers with shape memory effect was suggested.Comment: arXiv admin note: text overlap with arXiv:1811.0294

Force spectroscopy of barnase-barstar single molecule interaction

Results of the single molecule force spectroscopy study of specific interactions between ribonuclease barnase and its inhibitor barstar are presented. Experimental data obtained for the force loading rate ranging 2-70 nN/s are well approximated by a single straight line, from which the dissociation barrier of the width of 0.12 nm and height of 0.75-0.85X10(-19) J can be inferred. The measured value of specific interaction does not depend on the NaCl concentration. This apparently contradicts the well-known dependence of the binding energy of this pair on the salt concentration, but such a "contradiction" is explained by the insensitivity of the force spectroscopy data to the relatively long-range electrostatic interaction. The latter essentially contributes to the value of barnase-barstar binding energy revealed by biochemical measurements, and it is exactly this electrostatic interaction which is influenced by the salt concentration. Copyright (C) 2010 John Wiley & Sons, Ltd

An ontology-based nurse call management system (oNCS) with probabilistic priority assessment

<p>Abstract</p> <p>Background</p> <p>The current, place-oriented nurse call systems are very static. A patient can only make calls with a button which is fixed to a wall of a room. Moreover, the system does not take into account various factors specific to a situation. In the future, there will be an evolution to a mobile button for each patient so that they can walk around freely and still make calls. The system would become person-oriented and the available context information should be taken into account to assign the correct nurse to a call.</p> <p>The aim of this research is (1) the design of a software platform that supports the transition to mobile and wireless nurse call buttons in hospitals and residential care and (2) the design of a sophisticated nurse call algorithm. This algorithm dynamically adapts to the situation at hand by taking the profile information of staff members and patients into account. Additionally, the priority of a call probabilistically depends on the risk factors, assigned to a patient.</p> <p>Methods</p> <p>The <it>ontology-based Nurse Call System (oNCS) </it>was developed as an extension of a <it>Context-Aware Service Platform</it>. An ontology is used to manage the profile information. Rules implement the novel nurse call algorithm that takes all this information into account. Probabilistic reasoning algorithms are designed to determine the priority of a call based on the risk factors of the patient.</p> <p>Results</p> <p>The <it>oNCS </it>system is evaluated through a prototype implementation and simulations, based on a detailed dataset obtained from Ghent University Hospital. The arrival times of nurses at the location of a call, the workload distribution of calls amongst nurses and the assignment of priorities to calls are compared for the <it>oNCS </it><it>system </it>and the current, place-oriented nurse call system. Additionally, the performance of the system is discussed.</p> <p>Conclusions</p> <p>The execution time of the nurse call algorithm is on average 50.333 ms. Moreover, the <it>oNCS system </it>significantly improves the assignment of nurses to calls. Calls generally have a nurse present faster and the workload-distribution amongst the nurses improves.</p

A fluorescent microspheres-based microfluidic test system for the detection of immunoglobulin G to SARS-CoV-2

Background: The pandemic of the new coronavirus infection, COVID-19, is currently ongoing in the world. Over the years, the pathogen, SARS-CoV-2, has undergone a series of mutational genome changes, which has led to the spread of various genetic variants of the virus. Meanwhile, the methods used to diagnose SARS-CoV-2, to establish the disease stage and to assess the immunity, are nonspecific to SARS-CoV-2 variants and time-consumable. Thus, the development of new methods for diagnosing COVID-19, as well as their implementation in practice, is currently an important direction. In particular, application of systems based on chemically modified fluorescent microspheres (with a multiplex assay for target protein molecules) opens great opportunities. Aim: development of a microfluidic diagnostic test system based on fluorescent microspheres for the specific detection of immunoglobulins G (IgG) to SARS-CoV-2. Methods: A collection of human serum samples was characterized using enzyme-linked immunosorbent assay (ELISA) and commercially available reagent kits. IgG to SARS-CoV-2 in the human serum were detected by the developed immunofluorescent method using microspheres containing the chemically immobilized RBD fragment of the SARS-CoV-2 (Kappa variant) viral S-protein. Results: The level of IgG in the blood serum of recovered volunteers was 9-300 times higher than that in apparently healthy volunteers, according to ELISA (p0.001). Conjugates of fluorescent microspheres with the RBD-fragment of the S-protein, capable of specifically binding IgG from the blood serum, have been obtained. The immune complexes formation was confirmed by the fluorescence microscopy data; the fluorescence intensity of secondary antibodies in the immune complexes formed on the surface of microspheres was proportional to the content of IgG (r 0.963). The test system had a good predictive value (AUC 70.3%). Conclusion: A test system has been developed, based on fluorescent microspheres containing the immobilized RBD fragment of the SARS-CoV-2 S-protein, for the immunofluorescent detection of IgG in the human blood serum. When testing the system on samples with different levels of IgG to SARS-CoV-2, its prognostic value was shown. The obtained results allow us to present the test system as a method to assess the level of immunoglobulins to SARS-CoV-2 in the human blood serum for the implementation in clinical practice. The test system can also be integrated into various microfluidic systems to create chips and devices for the point-of-care diagnostics