Ferrite cavities

Ferrite cavities are used in synchrotrons and storage rings if the maximum RF frequency is in the order of a few MHz. We present a simple model for describing ferrite cavities. The most important parameters are defined, and the material properties are discussed. Several practical aspects are summarized, and the GSI SIS18 ferrite cavity is presented as an example.Comment: 19 pages, contribution to the CAS - CERN Accelerator School: Specialised Course on RF for Accelerators; 8 - 17 Jun 2010, Ebeltoft, Denmar

Effects of Process Variables and Size Scale on Solidification Microstructure in Laser-Based Solid Freeform Fabrication of Ti-6Al-4V

Mechanical Engineerin

Stability of longitudinal bunch length feedback for heavy-ion synchrotrons

In heavy-ion synchrotrons such as the SIS18 at Helmholtzzentrum für Schwerionenforschung, Helmholtz Centre for Heavy Ion Research (GSI), coherent oscillations of the particle bunches are damped by rf feedback systems to increase the stability and to improve the beam quality. In the longitudinal direction, important modes are the coherent longitudinal dipole and quadrupole oscillation. In this paper we present a new and rigorous approach to analyze the longitudinal feedback to damp these modes. The results are applied to the rf feedback loop at GSI that damps the quadrupole mode. The stability analysis is compared with simulations and is in good agreement with results of a beam experiment. Finally, we summarize practical implications for the operation of the feedback system regarding performance and stability

Resolution of diaschisis contributes to early recovery from post-stroke aphasia

Diaschisis is a phenomenon observed in stroke that is defined as neuronal dysfunction in regions spared by the infarction but connected to the lesion site. We combined lesion network mapping and task-based functional MRI in 71 patients with post-stroke aphasia to investigate, whether diaschisis and its resolution contribute to early loss and recovery of language functions. Language activation acquired in the acute, subacute and chronic phase was analyzed in compartments with high and low normative resting-state functional connectivity to the lesion site on an individual basis. Regions with high compared to regions with low lesion connectivity showed a steeper increase in language reactivation from the acute to the subacute phase. This finding is compatible with the assumption of resolution of diaschisis. Additionally, language performance in the subacute phase and improvement from the subacute to the chronic phase significantly correlated with the diaschisis effect and its resolution, respectively, suggesting a behavioral relevance of this effect. We therefore assume that undamaged but functionally connected regions become dysfunctional due to missing input from the lesion contributing to the aphasic deficit. Since these regions are structurally intact, dysfunction resolves over time contributing to the rapid early behavioral improvement observed in aphasic stroke patients. Our results demonstrate that diaschisis and its resolution might be a relevant mechanism of early loss and recovery of language function in acute stroke patients

Effect of model errors on the closed orbit correction at the SIS18 Synchrotron of GSI

The influence of model errors on the closed orbit correction for the SIS18 synchrotron at GSI has been simulated. The systematic model drift over the ramp due to the transition of triplet to doublet quadrupole configuration and the non-systematic tune shifts due to image charge and beta beating are considered. The study is aimed to draw hints for the robust stability requirements of the closed orbit feedback controller against model mismatch

ICONGETM v1.0 – flexible NUOPC-driven two-way coupling via ESMF exchange grids between the unstructured-grid atmosphere model ICON and the structured-grid coastal ocean model GETM

Two-way model coupling is important for representing the mutual interactions and feedbacks between atmosphere and ocean dynamics. This work presents the development of the two-way coupled model system ICONGETM, consisting of the atmosphere model ICON and the ocean model GETM. ICONGETM is built on the latest NUOPC coupling software with flexible data exchange and conservative interpolation via ESMF exchange grids. With ICON providing a state-of-the-art kernel for numerical weather prediction on an unstructured mesh and GETM being an established coastal ocean model, ICONGETM is especially suited for high-resolution studies. For demonstration purposes the newly developed model system has been applied to a coastal upwelling scenario in the central Baltic Sea

Numerical issues of the Total Exchange Flow (TEF) analysis framework for quantifying estuarine circulation

For more than a century, estuarine exchange flow has been quantified by means of the Knudsen relations which connect bulk quantities such as inflow and outflow volume fluxes and salinities. These relations are closely linked to estuarine mixing. The recently developed Total Exchange Flow (TEF) analysis framework, which uses salinity coordinates to calculate these bulk quantities, allows an exact formulation of the Knudsen relations in realistic cases. There are however numerical issues, since the original method does not converge to the TEF bulk values for an increasing number of salinity classes. In the present study, this problem is investigated and the method of dividing salinities, described by MacCready et al. (2018), is mathematically introduced. A challenging yet compact analytical scenario for a well-mixed estuarine exchange flow is investigated for both methods, showing the proper convergence of the dividing salinity method. Furthermore, the dividing salinity method is applied to model results of the Baltic Sea to demonstrate the analysis of realistic exchange flows and exchange flows with more than two layers.</p

Biodegradable and compostable alternatives to conventional plastics

This article is available open access through the publisher’s website at the link below. Copyright @ 2009 The Royal Society.Packaging waste forms a significant part of municipal solid waste and has caused increasing environmental concerns, resulting in a strengthening of various regulations aimed at reducing the amounts generated. Among other materials, a wide range of oil-based polymers is currently used in packaging applications. These are virtually all non-biodegradable, and some are difficult to recycle or reuse due to being complex composites having varying levels of contamination. Recently, significant progress has been made in the development of biodegradable plastics, largely from renewable natural resources, to produce biodegradable materials with similar functionality to that of oil-based polymers. The expansion in these bio-based materials has several potential benefits for greenhouse gas balances and other environmental impacts over whole life cycles and in the use of renewable, rather than finite resources. It is intended that use of biodegradable materials will contribute to sustainability and reduction in the environmental impact associated with disposal of oil-based polymers. The diversity of biodegradable materials and their varying properties makes it difficult to make simple, generic assessments such as biodegradable products are all ‘good’ or petrochemical-based products are all ‘bad’. This paper discusses the potential impacts of biodegradable packaging materials and their waste management, particularly via composting. It presents the key issues that inform judgements of the benefits these materials have in relation to conventional, petrochemical-based counterparts. Specific examples are given from new research on biodegradability in simulated ‘home’ composting systems. It is the view of the authors that biodegradable packaging materials are most suitable for single-use disposable applications where the post-consumer waste can be locally composted.EPSR