A Brewster route to Cherenkov detectors.

Cherenkov detectors enable a valuable tool to identify high-energy particles. However, their sensitivity and momentum coverage are limited by the refractive index of host materials. Especially, identifying particles with energy above multiple gigaelectronvolts requires host materials with a near-unity refractive index, which are limited to bulky gas chambers. Overcoming this fundamental material limit is important for future particle detectors yet remains a long-standing challenge. Here, we propose a different paradigm for Cherenkov detectors that utilizes the broadband angular filter made from stacks of variable one-dimensional photonic crystals. Owing to the Brewster effect, the angular filter is transparent only to Cherenkov photons from a precise incident angle. Particle identification is achieved by mapping each Cherenkov angle to the peak-intensity position of transmitted photons in the detection plane. Such angular filtering effect, although decreases the photon number collected in the detection plane, enables the realization of a non-dispersive pseudo refractive index over the entire visible spectrum. Moreover, the pseudo refractive index can be flexibly designed to different values close to unity. Our angular-selective Brewster paradigm offers a feasible solution to implement compact and highly sensitive Cherenkov detectors especially in beam lines with a small angular divergence using regular dielectrics

Comprehensive analysis of the association between inflammation indexes and complications in patients undergoing pancreaticoduodenectomy

BackgroundDuring clinical practice, routine blood tests are commonly performed following pancreaticoduodenectomy (PD). However, the relationship between blood cell counts, inflammation-related indices, and postoperative complications remains unclear.MethodWe conducted a retrospective study, including patients who underwent PD from October 2018 to July 2023 at the First Hospital of Chongqing Medical University, and compared baseline characteristics and clinical outcomes among different groups. Neutrophil count (NC), platelet count (PLT), lymphocyte count (LC), systemic immune-inflammation index (SII), platelet-to-lymphocyte ratio (PLR), neutrophil-to-lymphocyte ratio (NLR), and the product of platelet count and neutrophil count (PPN) were derived from postoperative blood test results. We investigated the association between these indicators and outcomes using multivariable logistic regression and restricted cubic spline analysis. The predictive performance of these indicators was assessed by the area under the curve (AUC) of the receiver operating characteristic (ROC) curve and decision curve analysis (DCA).ResultA total of 232 patients were included in this study. Multivariate logistic regression and restricted cubic spline analysis showed that all indicators, except for PLT, were associated with clinical postoperative pancreatic fistula (POPF). SII, NLR, and NC were linked to surgical site infection (SSI), while SII, NLR, and PLR were correlated with CD3 complication. PLT levels were related to postoperative hemorrhage. SII (AUC: 0.729), NLR (AUC: 0.713), and NC (AUC: 0.706) effectively predicted clinical POPF.ConclusionIn patients undergoing PD, postoperative inflammation-related indices and blood cell counts are associated with various complications. NLR and PLT can serve as primary indicators post-surgery for monitoring complications

A Study on the Transmission Line Transient Protection Containing Static Synchronous Compensator

This paper focuses on the transient protection of transmission line with FACTS Devices; the principle and mathematical model of static synchronous compensator (STATCOM) has been analyzed. And feasible control strategy has been pro-posed considering the voltage source inverter (VSI) as a core part of the FACTS components. The simulation results verify the rightness using electromagnetic transient simulation software PSCAD/EMTDC to set up electromagnetic transient model

A Cold-Adapted Chitinase-Producing Bacterium from Antarctica and Its Potential in Biocontrol of Plant Pathogenic Fungi

To obtain chitinase-producing microorganisms with high chitinolytic activity at low temperature, samples collected from Fildes Peninsula in Antarctica were used as sources for bioprospecting of chitinolytic microorganisms. A cold-adapted strain, designated as GWSMS-1, was isolated from marine sediment and further characterized as Pseudomonas. To improve the chitinase production, one-factor-at-a-time and orthogonal test approaches were adopted to optimize the medium components and culture conditions. The results showed that the highest chitinolytic activity (6.36 times higher than that before optimization) was obtained with 95.41 U L−1 with 15 g L−1 of glucose, 1 g L−1 of peptone, 15 g L−1 of colloid chitin and 0.25 g L−1 of magnesium ions contained in the medium, cultivated under pH 7.0 and a temperature of 20 °C. To better understand the application potential of this strain, the enzymatic properties and the antifungal activity of the crude chitinase secreted by the strain were further investigated. The crude enzyme showed the maximum catalytic activity at 35 °C and pH 4.5, and it also exhibited excellent low-temperature activity, which still displayed more than 50% of its maximal activity at 0 °C. Furthermore, the crude chitinase showed significant inhibition of fungi Verticillium dahlia CICC 2534 and Fusarium oxysporum f. sp. cucumerinum CICC 2532, which can cause cotton wilt and cucumber blight, respectively, suggesting that strain GWSMS-1 could be a competitive candidate for biological control in agriculture, especially at low temperature

Comparisons of natural and enhanced asphalt mixtures containing recycled cement-stabilized macadam as aggregates

The recycling of cement-stabilized macadam (CSM) is beneficial from the effective utilization of resources and the viewpoint of environmental preservation. For the effective utilization of CSM, it is useful to use CSM as recycled aggregates for hot-mix asphalt (HMA) productions as aggregates. In order to make this technology feasible, mixture design, chemical and physical properties, and durability of recycled aggregate hot-mix asphalt (RAHMA) should be engaged in the processing of demolished CSM. The objective of this study is to develop one RAHMA by recycling the base layer of semirigid pavements, and to assess the performance of natural and methanesiliconic acid sodium salt solution (MASS) enhanced RAHMA. Initial laboratory results find that the MASS treatments were beneficial to the performance of RAHMA; however, moisture resistance was found to be unsatisfactory. To improve moisture resistance, cement and hydrated lime fillers were applied in this study. The combined 1.75% by weight cement/ hydrated lime (1:1) was found to perform the best of the cases utilizing improved moisture resistance of RAHMA. Also, all of the residue Marshall stability ratio (MS0) and the splitting tensile strength ratio (TSR) were found to meet specifications. However, although the unaging and short-term aging performance of RAHMA were successful, all of the moisture resistance indicators of long-term aged RAHMA fell below standard rirements. Therefore, the long-term performance of the proposed RAHMA rires further improvement and study. While the particular use for RAHMA needs improvement concerning moisture durability, the enhancement methods mentioned in this study should be considered in the application of recycling CSM in hot-mix asphalt productions

Numerical investigation of condensing flow of low pressure steam turbine at different flow rate conditions

The numerical investigation on the wet steam flow in the last two stages of a 1000 MW fossil-fired low pressure steam turbine is presented in this paper. The non-equilibrium model via the classical nucleation theory is employed to simulate the condensing flow of the wet steam. The characteristics of the flow filed from design condition to low volume flow condition are calculated and the static performance of last stage moving blade is also obtained. The development of the backflow phenomenon is clearly captured through the analysis of the velocity triangle

Dual-Emission Fluorescence Probe Based on CdTe Quantum Dots and Rhodamine B for Visual Detection of Mercury and Its Logic Gate Behavior

It is urgent that a convenient and sensitive technique of detecting Hg2+ be developed because of its toxicity. Conventional fluorescence analysis works with a single fluorescence probe, and it often suffers from signal fluctuations which are influenced by external factors. In this research, a novel dual-emission probe assembled through utilizing CdTe quantum dots (QDs) and rhodamine B was designed to detect Hg2+ visually. Only the emission of CdTe QDs was quenched after adding Hg2+ in the dual-emission probe, which caused an intensity ratio change of the two different emission wavelengths and hence facilitated the visual detection of Hg2+. Compared to single emission QDs-based probe, a better linear relationship was shown between the variation of fluorescence intensity and the concentration of Hg2+, and the limit of detection (LOD) was found to be11.4 nM in the range of 0–2.6 μM. Interestingly, the intensity of the probe containing Hg2+ could be recovered in presence of glutathione (GSH) due to the stronger binding affinity of Hg2+ towards GSH than that towards CdTe QDs. Based on this phenomenon, an IMPLICATION logic gate using Hg2+/GSH as inputs and the fluorescence signal of QDs as an output was constructed

Editorial: Photocatalysis and electrocatalysis for energy conversion

Peer reviewed: Tru

Multichannel Inductive Sensor Based on Phase Division Multiplexing for Wear Debris Detection

Inductive wear debris sensor has been widely used in real time machine lubricant oil condition monitoring and fault forecasting. However, the small sensing zone, which is designed for high sensitivity, of the existing sensors leads to low throughput. In order to improve the throughput, a novel multichannel wear debris sensor that is based on phase division multiplexing is presented. By introducing the phase shift circuit into the system, multiple sensing coils could work at different initial phases. Multiple signals of sensing coils could be combined into one output without information loss. Synchronized sampling is used for data recording, and output signals of multiple sensing coils are extracted from the recorded data. A four-channel wear debris sensor system was designed to demonstrate our method. Subsequently, crosstalk analysis, pseudo-dynamic testing and dynamic testing were conducted to check the sensing system. Results show that signals of four sensing coils could be simultaneously detected and the detection limit for ferrous wear debris is 33 μm. Using the presented method, real time wear debris detection in multiple channels could be achieved without increasing the number of excitation source and data acquisition equipment