Flexible Ultrathin PolyDVB/EVB Composite Membranes for the Optimization of a Whole Blood Glucose Sensor.

An ultrathin composite membrane has been developed as the outer covering barrier in a model amperometric glucose oxidase enzyme electrode. The membrane was formed by cathodic electropolymerization of divinylbenzene/ethylvinylbenzene at the surface of a gold coated polyester support membrane. Permeability coefficients were determined for O2 and glucose across membranes with a range of polymer thicknesses. Anionic interferents (such as ascorbate), were screened from the working electrode via a charge exclusion mechanism. The enzyme electrode showed an initial 10% signal drift when first exposed to whole human blood over a period of 2 hours, after which responses remained essentially stable. Whole blood patient glucose determinations yielded a correlation coefficient of r2=0.99 compared to standard hospital analyses

Wavelength-independent coupler from fiber to an on-chip cavity, demonstrated over an 850nm span

A robust wide band (850 nm) fiber coupler to a whispering-gallery cavity with ultra-high quality factor is experimentally demonstrated. The device trades off ideality for broad-band, efficient input coupling. Output coupling efficiency can remain high enough for practical applications wherein pumping and power extraction must occur over very broad wavelength spans

Enhancement of pigmeat quality by altering pre-slaughter management

End of project reportThe studies presented in this report were conducted to investigate the effect of breed, slaughter weight, castration of male pigs and strategic feeding strategies on the performance of pigs to slaughter and on their carcass quality. The effect of breed, gender and feeding regimen on the performance of pigs and their carcass quality was examined in the first study (Section 3). From weaning to slaughter Landrace-sired pigs grew at a similar rate but had a better feed conversion efficiency compared with Duroc-sired pigs. Landrace-sired pigs also had a higher carcass lean and greater muscle depth than Duroc-sired pigs. Entire male pigs grew more efficiently, had lower lean content in their carcasses and had a reduced kill out yield when compared with gilts. The eye muscle depth was greater for gilts than entire males. Diluting the diet with grass-meal (GM) reduced growth rate, caused a deterioration in feed conversion efficiency, reduced back fat thickness, reduced eye muscle thickness and reduced kill out yield compared to the control feeding regimen of a cereal based diet. Compensatory growth was observed during a re-alimentation period following a period of diet dilution with grass-meal. However, where it did occur, in most cases it was only partial. Adding 5% rapeseed oil instead of lard to the finisher diet increased nitrogen utilization efficiency and phosphorous utilization efficiency. The effect of gender (boar, castrate, gilt) and slaughter weight (80 to 120kg) on pig performance, carcass quality, meat quality, and nitrogen excretion was investigated in the second study (Section 4). Boars grew faster than gilts and more efficiently than castrates or gilts. Castrates had a higher kill out yield than boars. Nitrogen excretion from castrates was similar to gilts which were both higher than that from boars. The processing value of carcasses from castrates may be higher than that of boars and gilts. In particular castrates had heavier loins and bellies than either boars or gilts. Carcasses from castrates and gilts had a higher temperature (recorded 24 hours post slaughter) than boars. However, pH24 was not affected by gender. The intramuscular fat content of the l. dorsi in castrates was higher than that of boars or gilts, however at 1.65% this was well below the level (2.0%) above which any noticeable sensory attributes might be detected. Feed intake increased with increasing slaughter weight and feed conversion efficiency deteriorated. N excretion also increased with each increment in weight. Carcass lean content increased up to 90kg live EOP 4939.doc 4 25/10/2005 weight then reached a plateau and declined after 110kg live weight. Heavier carcasses yielded more product for approximately the same slaughtering cost and the associated larger muscles could make it easier to use seam butchery techniques that result in lean, well-trimmed, attractive cuts and joints. The pH45 and pH24 were reduced with increasing slaughter weight and drip loss increased. Heavier pigs may be more prone to the development of PSE than lighter pigs as their carcass temperature remains higher for longer than that of lighter pigs

Yb-doped glass microcavity laser operation in water

A ytterbium-doped silica microcavity laser demonstrates stable laser emission while completely submerged in water. To our knowledge, it is the first solid-state laser whose cavity mode interacts with water. The device generates more than 2 μW of output power. The laser performance is presented, and low-concentration biosensing is discussed as a potential application

Improved hydrogen gas production in microbial electrolysis cells using inexpensive recycled carbon fibre fabrics

Growing energy demands of wastewater treatment have made it vital for water companies to develop less energy intensive processes for treating wastewater if net zero emissions are to be achieved by 2050. Microbial electrolysis cells (MECs) have the potential to do this by treating water and producing renewable hydrogen gas as a product, but capital and operational costs have slowed their deployment. By using recycled carbon fibre mats, commercially viable MECs can brought closer to reality, where recycled carbon fibre anode MECs treating real wastewater (normalised ~3100 L d−1) were producing 66.77 L H2 d−1 while graphite felt anode MECs produced 3.65 L H2 d−1 per 1 m3 reactor, anodes costing £5.53 m−2 and £88.36 m−2 respectively, resulting in a total anode cost saving of 93%. This could incentivise the development of larger pilot systems, opening the door for generating greater value and a more sustainable wastewater treatment industry

30-nm wavelength conversion at 10 Gbit/s by four-wave mixing in a semiconductor optical amplifier

Four-wave mixing (FWM) in semiconductor optical amplifiers (SOAs) is currently the only available strictly transparent wavelength-conversion technique, which is not penalized by phase matching. The span of the conversion is limited primarily by conversion efficiency and signal-to-noise (SNR) issues, both of which are expected to improve with the use of longer SOAs. In this paper, we demonstrate significantly enhanced performance of long converters in a system experiment at 10 Gbit/s. The experiment shows for the first time, to our knowledge, that FWM wavelength down-conversions can span the full gain bandwidth of erbium-doped fiber amplifiers

On-Chip, Ultra-Low Threshold Yb Silica Laser

A novel Yb:SiO_2 fiber-coupled laser on a silicon chip was fabricated using a solution-gel process. We report a record-low pump threshold of 2 μW, and discuss the practical advantages of Yb microlasers

Past and Projected Changes in Western North Pacific Tropical Cyclone Exposure

The average latitude where tropical cyclones (TCs) reach their peak intensity has been observed to be shifting poleward in some regions over the past 30 years, apparently in concert with the independently observed expansion of the tropical belt. This poleward migration is particularly well observed and robust in the western North Pacific Ocean (WNP). Such a migration is expected to cause systematic changes, both increases and decreases, in regional hazard exposure and risk, particularly if it persists through the present century. Here, it is shown that the past poleward migration in the WNP has coincided with decreased TC exposure in the region of the Philippine and South China Seas, including the Marianas, the Philippines, Vietnam, and southern China, and increased exposure in the region of the East China Sea, including Japan and its Ryukyu Islands, the Korea Peninsula, and parts of eastern China. Additionally, it is shown that projections of WNP TCs simulated by, and downscaled from, an ensemble of numerical models from phase 5 of the Coupled Model Intercomparison Project (CMIP5) demonstrate a continuing poleward migration into the present century following the emissions projections of the representative concentration pathway 8.5 (RCP8.5). The projected migration causes a shift in regional TC exposure that is very similar in pattern and relative amplitude to the past observed shift. In terms of regional differences in vulnerability and resilience based on past TC exposure, the potential ramifications of these future changes are significant. Questions of attribution for the changes are discussed in terms of tropical belt expansion and Pacific decadal sea surface temperature variability

Wavelength-independent bent-fiber coupler to an ultra-high Q cavity demonstrated over 850 nm span

A bent tapered-fiber coupler is experimentally demonstrated to allow wavelength independent fiber-to-cavity coupling over an 850nm span; opening current technology of ultra-high Q cavities for applications spanning the UV to the IR band