522 research outputs found
Recommended from our members
High-rate lithium ion energy storage to facilitate increased penetration of photovoltaic systems in electricity grids
High-rate lithium ion batteries can play a critical role in decarbonizing our energy systems both through their underpinning of the transition to use renewable energy resources such as photovoltaics and electrification of transport. Their ability to be rapidly and frequently charged and discharged can enable this energy storage technology to play a key role in facilitating future lowcarbon electricity networks and thereby limit emissions that may result from transport electrification if fossil fuels are required for battery production and charging. This decarbonizing transition will require lithium ion technology to provide increased power and longer cycle lives at reduced cost. Rate performance and cycle life are ultimately limited by the materials used and the kinetics associated with the charge transfer reactions, ionic and electronic conduction. We review materials strategies for electrode materials and electrolytes that can facilitate high rates and long cycle lives and explore the new opportunities that may arise in embedded distributed storage via devices that blur the distinction between supercapacitors and batteries.This work has been supported by the Australian Research Council (ARC) through grants DP170103219 and FT170100447 (Future Fellowship – Alison Lennon). Yu Jiang and Charles Hall acknowledge the support of the Australian Government through their Research Training Program Scholarships. Kent J. Griffith acknowledges funding from the Winston Churchill Foundation of the United States and a Herchel Smith Scholarship. Kent J. Griffith and Clare P. Grey thank the EPSRC for a LIBATT grant (EP/M009521/1). The views expressed herein are not necessarily the views of the Australian Government, and the Australian Government does not accept responsibility for any information or advice contained herein
Recommended from our members
Superionic Lithium Intercalation through 2 x 2 nm(2) Columns in the Crystallographic Shear Phase Nb18W8O69
Nb18W8O69 (9Nb2O5·8WO3) is the tungsten-rich end-member of the Wadsley–Roth crystallographic shear (cs) structures within the Nb2O5–WO3 series. It has the largest block size of any known, stable Wadsley–Roth phase, comprising 5 × 5 units of corner-shared MO6 octahedra between the shear planes, giving rise to 2 × 2 nm2 blocks. Rapid lithium intercalation is observed in this new candidate battery material and 7Li pulsed field gradient nuclear magnetic resonance spectroscopy—measured in a battery electrode for the first time at room temperature—reveals superionic lithium conductivity with Li diffusivities at 298 K predominantly between 10–10 and 10–12 m2·s–1. In addition to its promising rate capability, Nb18W8O69 adds to our understanding of the large family of high-performance Wadsley–Roth complex metal oxides
Recommended from our members
Atomic and Electronic Structure of Complex Metal Oxides during Electrochemical Reaction with Lithium
Lithium-ion batteries have transformed energy storage and technological applications. They stand poised to convert transportation from combustion to electric engines. The discharge/charge rate is a key parameter that determines battery power output and recharge time; typically, operation is on the timescale of hours but reducing this would improve existing applications and open up new possibilities. Conventionally, the rate at which a battery can operate has been improved by synthetic strategies to decrease the solid-state diffusion length of lithium ions by decreasing particle sizes down to the nanoscale. In this work, a different approach is taken toward next-generation high-power and fast charging lithium-ion battery electrode materials.
The phenomenon of high-rate charge storage without nanostructuring is discovered in niobium oxide and the mechanism is explained in the context of the structure–property relationships of Nb2O5. Three polymorphs, T-Nb2O5, B-Nb2O5, and H-Nb2O5, take bronze-like, rutile-like, and crystallographic shear structures, respectively. The bronze and crystallographic shear compounds, with unique electrochemical properties, can be described as ordered, anion-deficient nonstoichiometric defect structures derived from ReO3. The lessons learned in niobia serve as a platform to identify other compounds with related structural motifs that apparently facilitate high-rate lithium insertion and extraction. This leads to the synthesis, characterisation, and electrochemical evaluation of the even more complicated composition–structure–property relationships in ternary TiO2–Nb2O5 and Nb2O5–WO3 phases. Advanced structural characterisation including multinuclear solid-state nuclear magnetic resonance spectroscopy, density functional theory, X-ray absorption spectroscopy, operando high-rate
X-ray diffraction, and neutron diffraction is conducted throughout to understand the evolution of local and long-range atomic structure and changes in electronic states.Churchill Scholarship - Winston Churchill Foundation of the United States of America
Herchel Smith Scholarship
Cambridge International Trus
Toxicity of radiotherapy in patients with collagen vascular disease
BACKGROUND. A diagnosis of collagen vascular disease (CVD) may predispose to radiotherapy (RT) toxicity. The objective of the current study was to identify factors that influence RT toxicity in the setting of CVD. METHODS. A total of 86 RT courses for 73 patients with CVD were delivered between 1985 and 2005. CVD subtypes include rheumatoid arthritis (RA; 33 patients), systemic lupus erythematosus (SLE; 13 patients), scleroderma (9 patients), dermatomyositis/polymyositis (5 patients), ankylosing spondylitis (4 patients), polymyalgia rheumatica/temporal arteritis (4 patients), Wegener granulomatosis (3 patients), and mixed connective tissue disorders (MCTD)/other (2 patients). Each patient with CVD was matched to 1 to 3 controls with respect to sex, race, site irradiated, RT dose (±2 Gray), and age (±5 years). RESULTS. There was no significant difference between CVD patients (65.1%) and controls (72.5%) experiencing any acute toxicity. CVD patients had a higher incidence of any late toxicity (29.1% vs 14%; P = .001), and a trend toward an increased rate of severe late toxicity (9.3% vs 3.7%; P = .079). RT delivered to the breast had increased risk of severe acute toxicity, whereas RT to the pelvis had increased risk of severe acute and late toxicity. RT administered in the setting of scleroderma carried a higher risk of severe late toxicity, whereas RT to SLE patients carried a higher risk of severe acute and late toxicity. CONCLUSIONS. Although generally well tolerated, RT in the setting of CVD appears to carry a higher risk of late toxicity. RT to the pelvis or in the setting of SLE or scleroderma may predispose to an even greater risk of severe toxicity. These issues should be considered when deciding whether to offer RT for these patients. Cancer 2008. © 2008 American Cancer Society.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/60460/1/23591_ftp.pd
Cation Disorder and Lithium Insertion Mechanism of Wadsley-Roth Crystallographic Shear Phases from First Principles.
Wadsley-Roth crystallographic shear phases form a family of compounds that have attracted attention due to their excellent performance as lithium-ion battery electrodes. The complex crystallographic structure of these materials poses a challenge for first-principles computational modeling and hinders the understanding of their structural, electronic and dynamic properties. In this article, we study three different niobium-tungsten oxide crystallographic shear phases (Nb12WO33, Nb14W3O44, Nb16W5O55) using an enumeration-based approach and first-principles density-functional theory calculations. We report common principles governing the cation disorder, lithium insertion mechanism, and electronic structure of these materials. Tungsten preferentially occupies tetrahedral and block-central sites within the block-type crystal structures, and the local structure of the materials depends on the cation configuration. The lithium insertion proceeds via a three-step mechanism, associated with an anisotropic evolution of the host lattice. Our calculations reveal an important connection between long-range and local structural changes: in the second step of the mechanism, the removal of local structural distortions leads to the contraction of the lattice along specific crystallographic directions, buffering the volume expansion of the material. Niobium-tungsten oxide shear structures host small amounts of localized electrons during initial lithium insertion due to the confining effect of the blocks, but quickly become metallic upon further lithiation. We argue that the combination of local, long-range, and electronic structural evolution over the course of lithiation is beneficial to the performance of these materials as battery electrodes. The mechanistic principles we establish arise from the compound-independent crystallographic shear structure and are therefore likely to apply to niobium-titanium oxide or pure niobium oxide crystallographic shear phases.We acknowledge the use of Athena at HPC Midlands+, which was funded by the EPSRC on grant EP/P020232/1, in this research via the EPSRC RAP call of spring 2018. C.P.K. thanks the Winton Programme for the Physics of Sustainability and EPSRC for financial support. K.J.G. thanks the Winston Churchill Foundation of the United States and the Herchel Smith Foundation. K.J.G. and C.P.G. also thank the EPSRC for funding under a program grant (EP/M009521/1)
Lithium Diffusion in Niobium Tungsten Oxide Shear Structures.
Niobium tungsten oxides with crystallographic shear structures form a promising class of high-rate Li-ion anode materials. Lithium diffusion within these materials is studied in this work using density functional theory calculations, specifically nudged elastic band calculations and ab initio molecular dynamics simulations. Lithium diffusion is found to occur through jumps between 4-fold coordinated window sites with low activation barriers (80-300 meV) and is constrained to be effectively one-dimensional by the crystallographic shear planes of the structures. We identify a number of other processes, including rattling motions with barriers on the order of the thermal energy at room temperature, and intermediate barrier hops between 4-fold and 5-fold coordinated lithium sites. We demonstrate differences regarding diffusion pathways between different cavity types; within the ReO3-like block units of the structures, cavities at the corners and edges host more isolated diffusion tunnels than those in the interior. Diffusion coefficients are found to be in the range of 10-12 to 10-11 m2 s-1 for lithium concentrations of 0.5 Li/TM. Overall, the results provide a complete picture of the diffusion mechanism in niobium tungsten oxide shear structures, and the structure-property relationships identified in this work can be generalized to the entire family of crystallographic shear phases.Winton Programme for the Physics of Sustainability
Winston Churchill Foundation
Herchel Smith Foundatio
First-Principles Study of Localised and Delocalised Electronic States in Crystallographic Shear Phases of Niobium Oxide
Crystallographic shear phases of niobium oxide form an interesting family of
compounds that have received attention both for their unusual electronic and
magnetic properties, as well as their performance as intercalation electrode
materials for lithium-ion batteries. Here, we present a first-principles
density-functional theory study of the electronic structure and magnetism of
H-NbO, NbO, NbO, NbO, and
NbO. These compounds feature blocks of niobium-oxygen octahedra
as structural units, and we show that this block structure leads to a
coexistence of flat and dispersive energy bands, corresponding to localised and
delocalised electronic states. Electrons localise in orbitals spanning multiple
niobium sites in the plane of the blocks. Localised and delocalised electronic
states are both effectively one-dimensional and are partitioned between
different types of niobium sites. Flat bands associated with localised
electrons are present even at the GGA level, but a correct description of the
localisation requires the use of GGA+U or hybrid functionals. We discuss the
experimentally observed electrical and magnetic properties of niobium suboxides
in light of our results, and argue that their behaviour is similar to that of
-doped semiconductors, but with a limited capacity for localised electrons.
When a threshold of one electron per block is exceeded, metallic electrons are
added to existing localised electrons. We propose that this behaviour of shear
phases is general for any type of -doping, and should transfer to doping by
alkali metal (lithium) ions during operation of niobium oxide-based battery
electrodes. Future directions for theory and experiment on mixed-metal shear
phases are suggested
Nodule heterogeneity as shown by size differences between the targeted nodule and the tumor in thyroidectomy specimen
BACKGROUND. Missed papillary thyroid carcinoma (PTC) diagnoses on fine-needle aspiration (FNA) can result from many causes. To the authors' knowledge, the issue of whether the detection of PTC is correlated with nodule heterogeneity has not been studied to date. METHODS. The authors identified all thyroidectomy specimens with a diagnosis of PTC that had undergone at least 1 prior FNA in the study institution between 1998 and 2003. The tumor size at the time of the resection, the ultrasound (US)-determined nodule size, and other parameters were compared between the 2 groups in which PTC was or was not diagnosed on FNA. RESULTS. Of a total of 89 specimens, 47 were diagnosed on FNA with an average tumor size of 1.7 cm and an US-determined nodule size of 2.1 cm (a difference of 0.4 cm). Forty-two specimens with a smaller average tumor size of 0.9 cm ( P <.0001) and a US-determined nodule size of 2.4 cm (a difference of 1.5 cm) were missed. The differences with regard to the US-determined nodule size and tumor size between the 2 groups were significant (0.4 cm vs 1.5 cm; P < .0001). In the missed group, 29 specimens were found to have PTC foci that measured ≤1.0 cm and 26 had a reasonable size difference (RSD; defined as a PTC size outside the range of ±50% of the US-determined nodule size) as the indicator of the mixed nature of nodules targeted for FNA, whereas in the diagnostic group, 9 foci measured ≤1.0 cm and 6 had RSD. There was no cytologic evidence with which to render a diagnosis of PTC on further review in the missed group. CONCLUSIONS. The major reason for a missed diagnosis of PTC on FNA is because of inadequate tumor sampling due to the heterogeneity of the nodule targeted for FNA. This is illustrated by the RSD noted between the targeted nodule and the actual PTC tumor focus in the resection specimen. Cancer (Cancer Cytopathol) 2008. © 2007 American Cancer Society.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/58022/1/23253_ftp.pd
Natural abundance solid-state 33S NMR study of NbS3: applications for battery conversion electrodes.
We report ultra-wideline, high-field natural abundance solid-state 33S NMR spectra of the Li-ion battery conversion electrode NbS3, the first 33S NMR study of a compound containing disulfide (S22-) units. The large quadrupolar coupling parameters (CQ ≈ 31 MHz) are consistent with values obtained from DFT calculations, and the spectra provide evidence for the linear Peierls distortion that doubles the number of 33S sites
- …