407 research outputs found
PIV-based Investigation of Hemodynamic Factors in Diseased Carotid Artery Bifurcations with Varying Plaque Geometries
Ischemic stroke is often a consequence of complications due to clot formation (i.e. thrombosis) at the site of an atherosclerotic plaque developed in the internal carotid artery. Hemodynamic factors, such as shear-stress forces and flow disturbances, can facilitate the key mechanisms of thrombosis. Atherosclerotic plaques can differ in the severity of stenosis (narrowing), in eccentricity (symmetry), as well as inclusion of ulceration (wall roughness). Therefore, in terms of clinical significance, it is important to investigate how the local hemodynamics of the carotid artery is mediated by the geometry of plaque. Knowledge of thrombosis-associated hemodynamics may provide a basis to introduce advanced clinical diagnostic indices that reflect the increased probability of thrombosis and thus assist with better estimation of stroke risk, which is otherwise primarily assessed based on the degree of narrowing of the lumen.
A stereoscopic particle image velocimetry (stereo-PIV) system was configured to obtain instantaneous full-field velocity measurements in life-sized carotid artery models. Extraction of the central-plane and volumetric features of the flow revealed the complexity of the stenotic carotid flow, which increased with increasing stenosis severity and changed with the symmetry of the plaque. Evaluation of the energy content of two models of the stenosed carotid bifurcation provided insight on the expected level of flow instabilities with potential clinical implications. Studies in a comprehensive family of eight models ranging from disease-free to severely stenosed (30%, 50%, 70% diameter reduction) and with two types of plaque symmetry (concentric or eccentric), as well as a single ulcerated stenosed model, clearly demonstrated the significance of plaque geometry in marked alteration of the levels and patterns of downstream flow disturbances and shear stress. Plaque eccentricity and ulceration resulted in enhanced flow disturbances. In addition, shear-stress patterns in those models with eccentric stenosis were suggestive of increased thrombosis potential at the post-stenotic recirculation zone compared to their concentric counterpart plaques
Quantum Sensing of Single Phonons via Phonon Drag in Two-Dimensional Materials
The capacity to electrically detect phonons, ultimately at the single-phonon
limit, is a key requirement for many schemes for phonon-based quantum
computing, so-called quantum phononics. Here, we predict that by exploiting the
strong coupling of their electrons to surface-polar phonons, van der Waals
heterostructures can offer a suitable platform for phonon sensing, capable of
resolving energy transfer at the single-phonon level. The geometry we consider
is one in which a drag momentum is exerted on electrons in a graphene layer, by
a single out-of-equilibrium phonon in a dielectric layer of hexagonal boron
nitride, giving rise to a measurable induced voltage (). Our
numerical solution of the Boltzmann Transport Equation shows that this drag
voltage can reach a level of a few hundred microvolts per phonon, well above
experimental detection limits. Furthermore, we predict that
should be highly insensitive to the mobility of carriers in the graphene layer
and to increasing the temperature to at least 300 K, offering the potential of
a versatile material platform for single-phonon sensing.Comment: 13 pages, 6 figure
Recommended from our members
Harnessing demand flexibility to minimize cost, facilitate renewable integration, and provide ancillary services
textRenewable energy is key to a sustainable future. However, the intermittency of most renewable sources and lack of sufficient storage in the current power grid means that reliable integration of significantly more renewables will be a challenging task. Moreover, increased integration of renewables not only increases uncertainty, but also reduces the fraction of traditional controllable generation capacity that is available to cope with supply-demand imbalances and uncertainties. Less traditional generation also means less rotating mass that provides very short term, yet very important, kinetic energy storage to the system and enables mitigation of the frequency drop subsequent to major contingencies but before controllable generation can increase production. Demand, on the other side, has been largely regarded as non-controllable and inelastic in the current setting. However, there is strong evidence that a considerable portion of the current and future demand, such as electric vehicle load, is flexible. That is, the instantaneous power delivered to it needs not to be bound to a specific trajectory. In this thesis, we focus on harnessing demand flexibility as a key to enabling more renewable integration and cost reduction. We start with a data driven analysis of the potential of flexible demands, particularly plug-in electric vehicle (PEV) load. We first show that, if left unmanaged, these loads can jeopardize grid reliability by exacerbating the peaks in the load profile and increasing the negative correlation of demand with wind energy production. Then, we propose a simple local policy with very limited information and minimal coordination that besides avoiding undesired effects, has the positive side-effect of substantially increasing the correlation of flexible demand with wind energy production. Such local policies could be readily implemented as modifications to existing "grid friendly" charging modes of plug-in electric vehicles. We then propose improved localized charging policies that counter balance intermittency by autonomously responding to frequency deviations from the nominal frequency and show that PEV load can offer a substantial amount of such ancillary services. Next, we consider the case where real-time prices are employed to provide incentives for demand response. We consider a flexible load under such a pricing scheme and obtain the optimal policy for responding to stochastic price signals to minimize the expected cost of energy. We show that this optimal policy follows a multi-threshold form and propose a recursive method to obtain these thresholds. We then extend our results to obtain optimal policies for simultaneous energy consumption and ancillary service provision by flexible loads as well as optimal policies for operation of storage assets under similar real-time stochastic prices. We prove that the optimal policy in all these cases admits a computationally efficient form. Moreover, we show that while optimal response to prices reduces energy costs, it will result in increased volatility in the aggregate demand which is undesirable. We then discuss how aggregation of flexible loads can take us a step further by transforming the loads to controllable assets that help maintain grid reliability by counterbalancing the intermittency due to renewables. We explore the value of load flexibility in the context of a restructured electricity market. To this end, we introduce a model that economically incentivizes the load to reveal its flexibility and provides cost-comfort trade-offs to the consumers. We establish the performance of our proposed model through evaluation of the price reductions that can be provided to the users compared to uncontrolled and uncoordinated consumption. We show that a key advantage of aggregation and coordination is provision of "regulation" to the system by load, which can account for a considerable price reduction. The proposed scheme is also capable of preventing distribution network overloads. Finally, we extend our flexible load coordination problem to a multi-settlement market setup and propose a stochastic programming approach in obtaining day-ahead market energy purchases and ancillary service sales. Our work demonstrates the potential of flexible loads in harnessing renewables by affecting the load patterns and providing mechanisms to mitigate the inherent intermittency of renewables in an economically efficient manner.Electrical and Computer Engineerin
Energy and exergy analysis of using turbulator in a parabolic trough solar collector filled with mesoporous silica modified with copper nanoparticles hybrid nanofluid
Designing the most efficient parabolic trough solar collector (PTSC) is still a demanding and challenging research area in solar energy systems. Two effective recommended methods for this purpose that increase the thermal characteristics of PTSCs are adding turbulators and nanofluids. To study the effects of the two approaches on the energy efficiency of PTSCs, a stainless steel turbulator was used and solid nanoparticles of Cu/SBA-15 were added to the water with the volume concentrations of 0.019% to 0.075%. The generated turbulence in the fluid flow was modeled by the SST k–ω turbulent model. The results in daylight demonstrated that energy efficiency increases steadily by 11:30 a.m., and then, starts to drop gradually due to more irradiations at noon. It was observed that applying the turbulator to the studied PTSC has a significant influence on the enhancement of energy efficiency. Adding the nanoparticles augmented the average Nusselt number inside the solar collector in various studied Reynolds numbers. It was also found that the increase in volume concentrations of nanoparticles enhances heat transfer regularly
- …