37 research outputs found

    Evaluation of Diagnosis Techniques Used for Spinal Injury Related Back Pain

    Get PDF
    Back pain is a prevalent condition affecting much of the population at one time or the other. Complications, including neurological ones, can result from missed or mismanaged spinal abnormalities. These complications often result in serious patient injury and require more medical treatment. Correct diagnosis enables more effective, often less costly treatment methods. Current diagnosis technologies focus on spinal alterations. Only approximately 10% of back pain is diagnosable, with current diagnostic technologies. The objective of this paper is to investigate and evaluate based on specific criteria current diagnosis technique. Nine diagnostic techniques were found in the literature, namely, discography, myelography, single photon emission computer tomography (SPECT), computer tomography (CT), combined CT & SPECT, magnetic resonance imaging (MRI), upright and kinematic MRI, plain radiography and cineradiography. Upon review of the techniques, it is suggested that improvements can be made to all the existing techniques for diagnosing back pain. This review will aid health service developers to focus on insufficient areas, which will help to improve existing technologies or even develop alternative ones

    Relationship between Biomechanical Characteristics of Spinal Manipulation and Neural Responses in an Animal Model: Effect of Linear Control of Thrust Displacement versus Force, Thrust Amplitude, Thrust Duration, and Thrust Rate

    Get PDF
    High velocity low amplitude spinal manipulation (HVLA-SM) is used frequently to treat musculoskeletal complaints. Little is known about the intervention’s biomechanical characteristics that determine its clinical benefit. Using an animal preparation, we determined how neural activity from lumbar muscle spindles during a lumbar HVLA-SM is affected by the type of thrust control and by the thrust's amplitude, duration, and rate. A mechanical device was used to apply a linear increase in thrust displacement or force and to control thrust duration. Under displacement control, neural responses during the HVLA-SM increased in a fashion graded with thrust amplitude. Under force control neural responses were similar regardless of the thrust amplitude. Decreasing thrust durations at all thrust amplitudes except the smallest thrust displacement had an overall significant effect on increasing muscle spindle activity during the HVLA-SMs. Under force control, spindle responses specifically and significantly increased between thrust durations of 75 and 150 ms suggesting the presence of a threshold value. Thrust velocities greater than 20–30 mm/s and thrust rates greater than 300 N/s tended to maximize the spindle responses. This study provides a basis for considering biomechanical characteristics of an HVLA-SM that should be measured and reported in clinical efficacy studies to help define effective clinical dosages

    X-ray vision: the accuracy and repeatability of a technology that allows clinicians to see spinal X-rays superimposed on a person's back

    Get PDF
    Objective Since the discovery of ionizing radiation, clinicians have evaluated X-ray images separately from the patient. The objective of this study was to investigate the accuracy and repeatability of a new technology which seeks to resolve this historic limitation by projecting anatomically correct X-ray images on to a person’s skin. Methods A total of 13 participants enrolled in the study, each having a pre-existing anteroposterior lumbar X-ray. Each participant’s image was uploaded into the Hololens Mixed reality system which when worn, allowed a single examiner to view a participant’s own X-ray superimposed on the participant’s back. The projected image was topographically corrected using depth information obtained by the Hololens system then aligned via existing anatomic landmarks. Using this superimposed image, vertebral levels were identified and validated against spinous process locations obtained by ultrasound. This process was repeated 1–5 days later. The projection of each vertebra was deemed to be “on-target” if it fell within the known morphological dimensions of the spinous process for that specific vertebral level. Results The projection system created on-target projections with respect to individual vertebral levels 73% of the time with no significant difference seen between testing sessions. The average repeatability for all vertebral levels between testing sessions was 77%. Conclusion These accuracy and repeatability data suggest that the accuracy and repeatability of projecting X-rays directly on to the skin is feasible for identifying underlying anatomy and as such, has potential to place radiological evaluation within the patient context. Future opportunities to improve this procedure will focus on mitigating potential sources of error

    The Relation Between The Application Angle Of Spinal Manipulative Therapy (Smt) And Resultant Vertebral Accelerations In An In Situ Porcine Model

    No full text
    It has been hypothesized that the posterior tissues of the spine are frictionless and therefore allow only the normal force component of spinal manipulative therapy (SMT) to pass to underlying vertebrae. Given this assumption, vertebrae could not be moved in practitioner-defined directions by altering the application angle of SMT. To investigate this possibility, porcine lumbar spines were excised and then SMT applied at 90° to the posterior tissues of the target vertebra. A standard curve was constructed of increasing SMT force versus vertebral acceleration. SMT forces were then applied at 60° and 120° and the resulting accelerations substituted into the standard curve to obtain the transmitted force. Results showed that vertebral accelerations were greatest at a 90° SMT application angle and decreased in all axes at application angles ≠ 90°. The average decrease in transmitted force using application angles of 60° and 120° was within 5% of the predicted absolute value. In this model, SMT applied at a non-normal angle does not increase vertebral acceleration in that same direction, but acts to reduce transmitted force. This work provides justification for future studies in less available human cadavers. It is not yet known if variations in SMT application angle have relevance to clinical outcomes or patient safety.http://dx.doi.org/10.1016/j.math.2008.11.00

    Pressures Generated During Spinal Manipulation And Their Association With Hand Anatomy

    No full text
    Background Context: The role of the variation in the application manipulation itself is largely unknown. A greater understanding of its input parameters is necessary to better understand spinal manipulation outcomes. Purpose: The objective of this study is to determine if pressures generated during manipulation are altered by hand configuration. Design/Setting: Paired comparison of 2 different variable groups. Methods: Sixteen chiropractors provided 2 manipulations to a rigid surface using 2 hand configurations used commonly in clinical practice: arched and flat. Interposed between the hand and the rigid surface was a pressure sensor array and radiographic cassette. For each manipulation, pressures were recorded and a radiographic image was captured. Two radiologists then located the osseous features of the hand with respect to the sensor array. Results: In 15 of 16 cases, arched configurations produced peak pressures that corresponded to the radiographic location of the pisiform bone. In flat configurations, peak pressure migrated about the location of the hamate bone. Radiologists' agreement for bone position was high (κ = 0.96). Measures of peak pressure, total pressure, and pressure distribution were statistically different between hand configurations. Conclusions: The results of this study suggest that hand configuration influences the magnitude, location, and distribution of pressure generated by the hand during manipulation. This knowledge may have importance in understanding the relation among application parameters of manipulation, therapeutic benefit, and patient safety.http://dx.doi.org/10.1016/j.jmpt.2005.03.00

    An exploratory study to understand how people use Twitter to share experiences or information about spinal stenosis

    No full text
    Abstract Background Spinal stenosis is a narrowing of the spinal canal that may compress neurological tissues resulting in pain and disability. Although previous qualitative studies have solicited data regarding the life experience of patients with spinal stenosis or their opinions on relevant non-surgical treatments, their data was collected from participants in a controlled setting. Therefore, it remains unclear whether patients’ or caregivers’ concerns/opinions about spinal stenosis would be different in a non-experimental environment. Since Twitter is a popular online platform for people to share information and interact, it may reveal people’s thoughts and attitudes about spinal stenosis. This study aimed to identify tweets that are related to spinal stenosis on Twitter, and to categorize them into common themes. Methods A social media monitoring and analysis software program (TalkWalker) was used to search relevant tweets using the keywords 'spinal stenosis' and 'stenosis' between 29 May 2019 and 24 June 2020. Two independent reviewers screened and conducted content analysis of the tweets and classified the tweets into different themes. Results Of 510 identified tweets, 362 tweets met the selection criteria. Five themes were identified: (1) compromised physical, psychological, and social wellbeing (n = 173); (2) diverse treatment options (n = 69); (3) coping strategies (n = 30); (4) dissemination of scientific information (n = 86); and (5) health policy (n = 4). Most of the tweets revealed negative impacts of spinal stenosis on patients' physical and psychosocial wellbeing. People with spinal stenosis shared their experiences and sought helps from others, while some people used Twitter to disseminate relevant information and research findings. Conclusions This is the first study exploring Twitter using an online analytical tool to identify themes related to spinal stenosis. The approach not only helps understand people’s concerns about spinal stenosis in an uncontrolled environment, but also can be adopted to monitor influences of diseases or public health education on Twitter users

    Repetitive in vivo manual loading of the spine elicits cellular responses in porcine annuli fibrosi.

    No full text
    Back pain and intervertebral disc degeneration are prevalent, costly, and widely treated by manual therapies, yet the underlying causes of these diseases are indeterminate as are the scientific bases for such treatments. The present studies characterize the effects of repetitive in vivo manual loads on porcine intervertebral disc cell metabolism using RNA deep sequencing. A single session of repetitive manual loading applied to the lumbar spine induced both up- and down-regulation of a variety of genes transcribed by cells in the ventral annuli fibrosi. The effect of manual therapy at the level of loading was greater than at a level distant to the applied load. Gene ontology and molecular pathway analyses categorized biological, molecular, and cellular functions influenced by repetitive manual loading, with over-representation of membrane, transmembrane, and pericellular activities. Weighted Gene Co-expression Network Analysis discerned enrichment in genes in pathways of inflammation and skeletogenesis. The present studies support previous findings of intervertebral disc cell mechanotransduction, and are the first to report comprehensively on the repertoire of gene targets influenced by mechanical loads associated with manual therapy interventions. The present study defines the cellular response of repeated, low-amplitude loads on normal healthy annuli fibrosi and lays the foundation for future work defining how healthy and diseased intervertebral discs respond to single or low-frequency manual loads typical of those applied clinically
    corecore