Effects of acidic-basic properties on catalytic activity for the oxidative dehydrogenation of isobutane on calcium phosphates, doped and undoped with chromium

Catalytic activities of calcium hydroxyapatite (HAp) and β-type tricalcium phosphate (β-TCP) were examined for use in the oxidative dehydrogenation (ODH) of isobutane. β-TCP was catalytically inactive for the ODH of isobutane, but stoichiometric HAp afforded a high isobutene yield (5.6%). The isobutane conversion and isobutene selectivity of HAp depended on the atomic ratio of Ca/P. HAp with Ca/P = 1.67 showed the highest isobutene selectivity and isobutene yield among the HAp catalysts with different Ca/P ratios. The characterization of the acidic-basic properties showed that these properties affect the catalytic performance of HAp, and that its basicity is necessary for high catalytic activity. To improve the catalytic activities of calcium phosphates, they were impregnated with Cr. Despite a much lower surface area for β-TCP, Cr-impregnated β-TCP showed a higher isobutene yield (up to 8.4%) than that of Cr-impregnated HAp. The results of the XPS measurement showed that the Cr3+ species on calcium phosphates, owing to basicity, worked as active sites in the ODH of isobutane

Effects of Acid Treatment on the Acidic Properties and Catalytic Activity of MCM-41 for the Oxidative Dehydrogenation of Isobutane

Mesoporous silicas have shown promise as materials for solid catalysts or catalyst supports due to their unique characteristics. Metal-doped mesoporous silicas are known to be catalytically active in the oxidative dehydrogenation (ODH) of isobutane. However, heavy-metal-free mesoporous silicas have not been studied closely for their use as catalysts. In the present study, MCM-41 (#41 Mobil composition of matter) was acid-treated to enhance its catalytic activity, although pure MCM-41 was confirmed as catalytically inactive for the ODH of isobutane (isobutene yield = 0.9%). The pH of a slurry of as-synthesized MCM-41 was changed during acid treatment. A pH adjustment to 6.5 resulted in great improvement in catalytic activity (isobutene yield = 6.1%), but a pH adjustment to 4.5 resulted in insufficient improvement (isobutene yield = 4.5%). It was confirmed via XRD and N2 adsorption-desorption measurement that the pH adjustment to 4.5 degraded the ordered structure of MCM-41. This degradation would be a crucial factor that would render acid treatment less effective. In addition to the acid treatment, Al doping to MCM-41 was conducted. Al doping also greatly enhanced the acidity and catalytic activity of MCM-41

Effect of the template ion exchange behaviors of chromium into FSM-16 on the oxidative dehydrogenation of isobutane

The template ion exchange of chromium cations into FSM-16 (#16 Folded Sheets Mesoporous Materials) for 247 h resulted in a 2.89 wt% incorporation of those cations into the FSM-16, although only a 0.3 wt% incorporation had previously been reported. The XRD pattern of the resultant solid (Cr-FSM-16) showed that the hexagonal structure characteristic of FSM-16 remained after the 2.89 wt% incorporation of chromium cations. XPS could be used to detect the Cr3+ and Cr6+ species on the surface of Cr-FSM-16. A pre-edge peak that was due to a tetrahedrally coordinated Cr6+ species was confirmed in the XANES spectrum of the Cr-FSM-16, which showed that the coordination state around some Cr species was similar to that around the Si species in FSM-16. With the increase in the amount of chromium cations in FSM-16, its catalytic activity and stability during the oxidative dehydrogenation of isobutane were evidently improved

Oxidative Dehydrogenation of Isobutane to Isobutene on Metal-doped MCM-41 Catalysts

MCM-41 (#41 Mobil Composition of Matter) is a favorable material for heterogeneous reactions because of its unique porous structure. However, the catalytic activity of MCM-41 for the oxidative dehydrogenation (ODH) of isobutane to isobutene is known to be quite low. In the present study, a metal-doping method was employed to improve this catalytic activity. Doping of Cr, Co, Ni, or Mo into MCM-41 resulted in a great improvement in the catalytic activity. Since chromium-doped MCM-41 (Cr-MCM-41) showed the greatest catalytic activity among these catalysts, its redox property was further analyzed via XPS, XAFS and H2-TPR techniques. The XPS spectrum of Cr-MCM-41 suggested that it has Cr3+ and Cr6+ species on its surface. Also, a pre-edge peak due to Cr6+ species was confirmed in the XANES spectrum of Cr-MCM-41. In H2-TPR measurement, Cr-MCM-41 was more reducible than crystalline Cr2O3, which showed low catalytic activity for the ODH of isobutane. The reducible Cr6+ species on Cr-MCM-41 contributed to an improvement in the catalytic activity of MCM-41

The Catalytic Conversion of 1,2-Propandiol to Propanal on FSM-16 Molded by Wet-Treatment and Pressurization

The catalytic conversion of 1,2-propandiol to propanal is examined using FSM-16 particles (0.85－1.70 mm) molded by wet-treatment and pressurization. When FSM-16 was molded with 0.6 g of pressurization and supplied to the catalytic conversion of 1,2-propandiol at 673 K, this system resulted in a 94.8% conversion of 1,2-propandiol and 90.5% selectivity to propanal at 0.25 h on-stream, which was the maximum amount of activity. However, at 4.50 h on-stream, the activity decreased extremely to deactivation 19.9% conversion of 1,2-propandiol and 84.7% selectivity to propanal. In contrast, when FSM-16 molded with wet-treatment (0.15 g) was used for the conversion at 573 K, activity was greatly increased and stable 98.6% conversion of 1,2-propandiol and 56.2% selectivity to propanal at 0.25 h on-stream followed by 91.9% and 52.5%, respectively, at 4.50 h on-stream. The hexagonal structure of FSM-16 was suggested to have contributed to the suitable conversion of 1,2-propandiol to propanal

Acidic Properties of Various Silica Catalysts Doped with Chromium for the Oxidative Dehydrogenation of Isobutane to Isobutene

Although previous researchers have found that FSM-16 (#16 Folded Sheet Mesoporous material) doped with chromium and related Cr-doped silica catalysts has shown great activity for the oxidative dehydrogenation of isobutane to isobutene, information on the nature of these catalysts is insufficient. For this study, three types of Cr-doped silica catalysts were prepared by applying the template ion exchange method. CrOx/FSM-16 and CrOx/SiO2 were used as references. These catalysts were used for oxidative dehydrogenation, which was then characterized via various techniques. The most active catalyst was Cr-doped silica, which did not have the hexagonal structure that is characteristic of mesoporous FSM-16. Various characterizations showed that the catalytic activity of the Cr-species, stemmed from a weak acidic nature and a redox nature that originated from the combination of silicate and a Cr cation, as opposed to the hexagonal structure and strong acidic nature of FSM-16

Effects of Acidic Properties of FSM-16 on the Catalytic Conversion of 1,2-Propandiol in the Presence and Absence of Hydrogen

We have earlier showed how the catalytic conversion of 1,2-propandiol to propanal using FSM-16 (#16 folded sheets of mesoporous materials) when molded by wet treatment proceeded more favorably than when using FSM-16 molded by pressurization, while no comparison using other typical acidic catalysts and no examination of the acidic properties of FSM-16 was carried out. In the present study, the conversion using FSM-16 molded by wet treatment and pressurization was compared with that obtained by using typical acidic catalysts such as SiW12O40/SiO2 and MCM-41 (#41 of Mobil Composition of Matter) together with amorphous SiO2. Among these catalysts, FSM-16 molded by wet treatment showed the most suitable catalytic activity. In order to examine the effect of the molding procedure for FSM-16 on its structural and acidic properties, FSM-16 molded by both methods was examined using NH3-TPD, in situ FT-IR using NH3 as a probe molecule, and Hammett indicators together with XRD and TEM. According to Zaitsev's rule, the present conversion should afford acetone rather than propanal, which indicates that it would proceed via hydro cracking. Therefore, the conversion of 1,2-propandiol using FSM-16 was also examined in the presence and absence of hydrogen. Furthermore, hydration reactions of 1- and 2-propanol when using FMS-16 were examined. Based on the results obtained from this investigation, it was concluded that the conversion using a more acidic FSM-16 molded by wet treatment proceeded through dehydration rather than through hydro cracking

The Oxidative Esterification of Propionaldehyde to Methyl Propionate in the Liquid-Phase Using a Heterogeneous Palladium Catalyst

The optimization of the oxidative esterification of propionaldehyde to methyl propionate using a supported palladium catalyst in methanol under heavy-metal-free and pressurized-oxygen conditions, which we recently reported in a previous paper, were carried out together with a study of the reaction route, the nature of the catalytic active sites, and the effect of the support. In our previous paper, we reported significantly improved activity for oxidative esterification using commercially available 5%Pd/Al2O3 at 1.5 MPa of O2 gas and 333 K and emphasized that the doping of 5%Pd/Al2O3 with lead was not needed for the reaction system, but we could not improve the activity that was reported when using 5%Pd/γ-Al2O3 doped with 5% Pb (a 93.2% conversion of propionaldehyde, 76.8% selectivity for methyl propionate and a 71.6% yield of methyl propionate) at 0.3 MPa of O2 gas and 353 K, as reported by another laboratory. In the present study, however, we exceeded those values and obtained a 98.3% conversion of propionaldehyde, 75.3% selectivity for methyl propionate and a 74.0% yield of methyl propionate using 5%Pd/γ-Al2O3 undoped with Pb at 1.5 MPa of O2 gas and 333 K. It should be noted that, in the preparation of the present 5%Pd/γ-Al2O3, Pd was doped onto Al2O3 that had been previously treated with aqueous NaOH. Another active alumina support,η-Al2O3, prepared from boehmite, afforded activity that was substantially lower than that of γ-Al2O3 and depended on the calcination temperature of boehmite to η-Al2O3. When using various concentrations of CH3OH in the aqueous reaction solution, the oxidative esterification proceeded through the formation of propionic acid. To determine why the Al2O3 support afforded better activity than the active carbon support, Pd/Al2O3 and Pd/C catalysts were examined by XAFS (X-ray absorption fine structure). XAFS revealed that Pd on Al2O3 shows a better redox nature than Pd on C, which resulted in activity on Pd/Al2O3 that was better than that on Pd/C

Ex vivo reconstitution of fetal oocyte development in humans and cynomolgus monkeys

ヒト・サルの胎児卵巣から原始卵胞を体外で作出することに成功. 京都大学プレスリリース. 2022-08-01.New egg recipe to boost fertility research. 京都大学プレスリリース. 2022-08-14.In vitro oogenesis is key to elucidating the mechanism of human female germ-cell development and its anomalies. Accordingly, pluripotent stem cells have been induced into primordial germ cell-like cells and into oogonia with epigenetic reprogramming, yet further reconstitutions remain a challenge. Here, we demonstrate ex vivo reconstitution of fetal oocyte development in both humans and cynomolgus monkeys (Macaca fascicularis). With an optimized culture of fetal ovary reaggregates over three months, human and monkey oogonia enter and complete the first meiotic prophase to differentiate into diplotene oocytes that form primordial follicles, the source for oogenesis in adults. The cytological and transcriptomic progressions of fetal oocyte development in vitro closely recapitulate those in vivo. A comparison of single-cell transcriptomes among humans, monkeys, and mice unravels primate-specific and conserved programs driving fetal oocyte development, the former including a distinct transcriptomic transformation upon oogonia-to-oocyte transition and the latter including two active X chromosomes with little X-chromosome upregulation. Our study provides a critical step forward for realizing human in vitro oogenesis and uncovers salient characteristics of fetal oocyte development in primates