Application of a portable FTIR for measuring on-road emissions

The objective of this work was the development of an onroad in-vehicle emissions measurement technique utilizing a relatively new, commercial, portable Fourier Transform Infra-Red (FTIR) Spectrometer capable of identifying and measuring (at approximately 3 second intervals) up to 51 different compounds. The FTIR was installed in a medium class EURO1 spark ignition passenger vehicle in order to measure on-road emissions. The vehicle was also instrumented to allow the logging of engine speed, road speed, global position, throttle position, air-fuel ratio, air flow and fuel flow in addition to engine, exhaust and catalyst temperatures. This instrumentation allowed the calculation of massbased emissions from the volume-based concentrations measured by the FTIR. To validate the FTIR data, the instrument was used to measure emissions from an engine subjected to a real-world drive cycle using an AC dynamometer. Standard analyzers were operated simultaneously for comparison with the FTIR and the standard analyzer results showed that most pollutants (NOx, CO2, CO) were within ~10% of a standard analyzer during steady state conditions and within 20% during transients. The exception to this was total HC which was generally 50% or less than actual total HC, but this was due to the limited number of hydrocarbons measured by the FTIR. In addition to the regulated emissions, five toxic hydrocarbon species were analyzed and found to be sensitive to cold starts in varying proportions. Finally, FTIR data was compared to results from a commercially available on-road measurement system (Horiba OBS- 1000), and there was good agreement

Methodology for fitting and updating predictive accident models with trend

Reliable predictive accident models (PAMs) (also referred to as Safety Performance Functions (SPFs)) have a variety of important uses in traffic safety research and practice. They are used to help identify sites in need of remedial treatment, in the design of transport schemes to assess safety implications, and to estimate the effectiveness of remedial treatments. The PAMs currently in use in the UK are now quite old; the data used in their development was gathered up to 30 years ago. Many changes have occurred over that period in road and vehicle design, in road safety campaigns and legislation, and the national accident rate has fallen substantially. It seems unlikely that these ageing models can be relied upon to provide accurate and reliable predictions of accident frequencies on the roads today. This paper addresses a number of methodological issues that arise in seeking practical and efficient ways to update PAMs, whether by re-calibration or by re-fitting. Models for accidents on rural single carriageway roads have been chosen to illustrate these issues, including the choice of distributional assumption for overdispersion, the choice of goodness of fit measures, questions of independence between observations in different years, and between links on the same scheme, the estimation of trends in the models, the uncertainty of predictions, as well as considerations about the most efficient and convenient ways to fit the required models