Low Loss Microwave Ceramic and other Microwave Dielectric Materials for Beam Physics Applications

Introduction. Relativistic, high intensity and small emittance electron bunches are the basis of a future linear collider and free electron laser projects. Drive beam generation in a wakefield structure employing for power extraction and acceleration low loss dielectrics like microwave ceramics, fused silica and Chemical Vapor Deposition (CVD) diamond were considered.Objective. We report here our experimental testing of a ceramic material with extremely low loss tangent at GHz frequency ranges allowing the realization of high efficiency wakefield acceleration. We also present Barium Strontium Titanium oxides (BST) ferroelectric material, which is a critical tuning element of the 400 MHz superconducting radiofrequency (RF) tuner developed and tested by the CERN/Euclid Techlabs collaboration. The materials discussed here also include quartz and CVD diamonds that are capable of supporting the high RF electric fields generated by electron beams or pulsed high power microwaves. These materials have been optimized or specially designed for accelerator applications.Materials and methods. The ceramic materials for accelerators, commonly used for the dielectric based accelerating structures, have to withstand high gradient accelerating fields, and prevent potential charging by electron beams. Correspondingly, the ceramic materials, fused silica and CVD diamond were tested with high power wakefield accelerating structures at Argonne Wakefield Accelerator of Argonne National Laboratory. Some of the presented here ceramic materials were tested at X-band 11.4 GHz magnicon high power source.Results. Low loss microwave ceramics, fused silica, and CVD diamonds have been considered as materials for dielectric based accelerating structures to study of the physical limitations encountered driving > 100 MV/m at microwave and ~ GV/m at THz frequencies in a dielectric based wakefield accelerator. Various ceramic compositions were high power and electron beam tested at X-band 11.4 GHz magnicon power source and Argonne Wakefield Accelerator correspondingly. Special attention was paid to the CVD diamond cylindrical Ka-band 35 GHz wakefield structure development. Finally, the dielectric based structure tuning was demonstrated by varying the permittivity of the BST ferroelectric layer by temperature changes and by applying an external direct current electric field across the ferroelectric. This allows us to control the effective dielectric constant of the composite system and therefore, to control the structure frequency during operation. The same type of ferroelectric material was used for the Ferroelectric Fast Reactive tuner (FE-FRT) development. In a world first, CERN has tested the prototype FE-FRT with a superconducting cavity, and frequency tuning has been successfully demonstrated.Conclusion. Recent results on the development and experimental testing of advanced dielectric materials for accelerator applications are presented. Low loss microwave ceramics, quartz and CVD diamond are considered. We presented our experimental results on wakefield generation in microwave frequency ranges with the dielectric based accelerating structures. Special attention was paid to the experimental results on high power testing at X-band of the externally powered dielectric based components. Finally, we present here first experimental demonstration of ferroelectric tunable microwave ceramic for accelerator application, which includes both tunable dielectric wakefield accelerating structure and ferroelectric based fast high power tuner for superconducting cavities. The experimental results presented here are critical for the advanced dielectric wakefield accelerating structures and other components development intended for the future linear collider projects.Introduction. Relativistic, high intensity and small emittance electron bunches are the basis of a future linear collider and free electron laser projects. Drive beam generation in a wakefield structure employing for power extraction and acceleration low loss dielectrics like microwave ceramics, fused silica and Chemical Vapor Deposition (CVD) diamond were considered.Objective. We report here our experimental testing of a ceramic material with extremely low loss tangent at GHz frequency ranges allowing the realization of high efficiency wakefield acceleration. We also present Barium Strontium Titanium oxides (BST) ferroelectric material, which is a critical tuning element of the 400 MHz superconducting radiofrequency (RF) tuner developed and tested by the CERN/Euclid Techlabs collaboration. The materials discussed here also include quartz and CVD diamonds that are capable of supporting the high RF electric fields generated by electron beams or pulsed high power microwaves. These materials have been optimized or specially designed for accelerator applications.Materials and methods. The ceramic materials for accelerators, commonly used for the dielectric based accelerating structures, have to withstand high gradient accelerating fields, and prevent potential charging by electron beams. Correspondingly, the ceramic materials, fused silica and CVD diamond were tested with high power wakefield accelerating structures at Argonne Wakefield Accelerator of Argonne National Laboratory. Some of the presented here ceramic materials were tested at X-band 11.4 GHz magnicon high power source.Results. Low loss microwave ceramics, fused silica, and CVD diamonds have been considered as materials for dielectric based accelerating structures to study of the physical limitations encountered driving > 100 MV/m at microwave and ~ GV/m at THz frequencies in a dielectric based wakefield accelerator. Various ceramic compositions were high power and electron beam tested at X-band 11.4 GHz magnicon power source and Argonne Wakefield Accelerator correspondingly. Special attention was paid to the CVD diamond cylindrical Ka-band 35 GHz wakefield structure development. Finally, the dielectric based structure tuning was demonstrated by varying the permittivity of the BST ferroelectric layer by temperature changes and by applying an external direct current electric field across the ferroelectric. This allows us to control the effective dielectric constant of the composite system and therefore, to control the structure frequency during operation. The same type of ferroelectric material was used for the Ferroelectric Fast Reactive tuner (FE-FRT) development. In a world first, CERN has tested the prototype FE-FRT with a superconducting cavity, and frequency tuning has been successfully demonstrated.Conclusion. Recent results on the development and experimental testing of advanced dielectric materials for accelerator applications are presented. Low loss microwave ceramics, quartz and CVD diamond are considered. We presented our experimental results on wakefield generation in microwave frequency ranges with the dielectric based accelerating structures. Special attention was paid to the experimental results on high power testing at X-band of the externally powered dielectric based components. Finally, we present here first experimental demonstration of ferroelectric tunable microwave ceramic for accelerator application, which includes both tunable dielectric wakefield accelerating structure and ferroelectric based fast high power tuner for superconducting cavities. The experimental results presented here are critical for the advanced dielectric wakefield accelerating structures and other components development intended for the future linear collider projects

Wakefields Generated by Electron Beams Passing Through a Waveguide Loaded With an Active Medium

The wakefields of a relativistic electron beam passing through a waveguide loaded with an active medium with weak resonant dispersion have been considered. For the calculations in this paper the parameters of the medium are those of a solution of fullerene (C60) in a nematic liquid crystal that exhibits activity in the X-band. It was shown that several of the TM accelerating modes can be amplified for the geometries under consideration; structures in which higher order modes are amplified exhibit essential advantages as PASERs. In particular, the amplification of the highest mode occurs in a structure loaded with a rather thick active medium layer that maximizes the energy stored by the active medium.Comment: 7 pages, 6 figures, submitted to 2006 Advanced Accelerator Concept

Three-cell traveling wave superconducting test structure

Use of a superconducting traveling wave accelerating (STWA) structure with a small phase advance per cell rather than a standing wave structure may provide a significant increase of the accelerating gradient in the ILC linac. For the same surface electric and magnetic fields the STWA achieves an accelerating gradient 1.2 larger than TESLA-like standing wave cavities. The STWA allows also longer acceleration cavities, reducing the number of gaps between them. However, the STWA structure requires a SC feedback waveguide to return the few hundreds of MW of circulating RF power from the structure output to the structure input. A test single-cell cavity with feedback was designed, manufactured and successfully tested demonstrating the possibility of a proper processing to achieve a high accelerating gradient. These results open way to take the next step of the TW SC cavity development: to build and test a traveling-wave three-cell cavity with a feedback waveguide. The latest results of the single-cell cavity tests are discussed as well as the design of the test 3-cell TW cavity.Comment: 3 pp. Particle Accelerator, 24th Conference (PAC'11) 28 Mar - 1 Apr 2011: New York, US

Studies of Particle Acceleration by an Active Microwave Medium

The PASER is potentially a very attractive method for particle acceleration, in which energy from an active medium is transferred to a charged particle beam. The effect is similar to the action of a maser or laser with the stimulated emission of radiation being produced by the virtual photons in the electromagnetic field of the beam. We have been investigating the possibility of developing a demonstration PASER operating at X-band. The less restrictive beam transport and device dimensional tolerances required for working at X-band rather than optical frequencies as well as the widespread application of X-band hardware in accelerator technology all contribute to the attractiveness of performing a PASER demonstration experiment in this frequency range. Key to this approach is the availability of a new class of active materials that exhibit photoinduced electron spin polarization. We will report on the status of active material development and measurements, numerical simulations, and progress towards a planned microwave PASER acceleration experiment at the Argonne Wakefield Accelerator facility.Comment: 9 pages, 3 figures, submitted to Proceedings of the 2006 Advanced Accelerator Concepts Worksho

Low Loss Microwave Ceramic and other Microwave Dielectric Materials for Beam Physics Applications

Introduction. Relativistic, high intensity and small emittance electron bunches are the basis of a future linear collider and free electron laser projects. Drive beam generation in a wakefield structure employing for power extraction and acceleration low loss dielectrics like microwave ceramics, fused silica and Chemical Vapor Deposition (CVD) diamond were considered.Objective. We report here our experimental testing of a ceramic material with extremely low loss tangent at GHz frequency ranges allowing the realization of high efficiency wakefield acceleration. We also present Barium Strontium Titanium oxides (BST) ferroelectric material, which is a critical tuning element of the 400 MHz superconducting radiofrequency (RF) tuner developed and tested by the CERN/Euclid Techlabs collaboration. The materials discussed here also include quartz and CVD diamonds that are capable of supporting the high RF electric fields generated by electron beams or pulsed high power microwaves. These materials have been optimized or specially designed for accelerator applications.Materials and methods. The ceramic materials for accelerators, commonly used for the dielectric based accelerating structures, have to withstand high gradient accelerating fields, and prevent potential charging by electron beams. Correspondingly, the ceramic materials, fused silica and CVD diamond were tested with high power wakefield accelerating structures at Argonne Wakefield Accelerator of Argonne National Laboratory. Some of the presented here ceramic materials were tested at X-band 11.4 GHz magnicon high power source.Results. Low loss microwave ceramics, fused silica, and CVD diamonds have been considered as materials for dielectric based accelerating structures to study of the physical limitations encountered driving > 100 MV/m at microwave and ~ GV/m at THz frequencies in a dielectric based wakefield accelerator. Various ceramic compositions were high power and electron beam tested at X-band 11.4 GHz magnicon power source and Argonne Wakefield Accelerator correspondingly. Special attention was paid to the CVD diamond cylindrical Ka-band 35 GHz wakefield structure development. Finally, the dielectric based structure tuning was demonstrated by varying the permittivity of the BST ferroelectric layer by temperature changes and by applying an external direct current electric field across the ferroelectric. This allows us to control the effective dielectric constant of the composite system and therefore, to control the structure frequency during operation. The same type of ferroelectric material was used for the Ferroelectric Fast Reactive tuner (FE-FRT) development. In a world first, CERN has tested the prototype FE-FRT with a superconducting cavity, and frequency tuning has been successfully demonstrated.Conclusion. Recent results on the development and experimental testing of advanced dielectric materials for accelerator applications are presented. Low loss microwave ceramics, quartz and CVD diamond are considered. We presented our experimental results on wakefield generation in microwave frequency ranges with the dielectric based accelerating structures. Special attention was paid to the experimental results on high power testing at X-band of the externally powered dielectric based components. Finally, we present here first experimental demonstration of ferroelectric tunable microwave ceramic for accelerator application, which includes both tunable dielectric wakefield accelerating structure and ferroelectric based fast high power tuner for superconducting cavities. The experimental results presented here are critical for the advanced dielectric wakefield accelerating structures and other components development intended for the future linear collider projects

Dielectric Collimators for Linear Collider Beam Delivery System

In this paper, dielectric collimator concepts for the linear collider are described. Cylindrical and planar dielectric collimator designs for CLIC and ILC parameters are presented, and results of simulations to minimize the beam impedance are discussed. The prototype collimator system is planned to be fabricated and experimentally tested at Facilities for Accelerator Science and Experimental Test Beams (FACET) at SLA

Dielectric Collimators for Beam Delivery Systems

Wakefield generation by the collimation system is known to be a critical linear collider design issue. Optimization of the collimators represents a tradeoff between beam quality (halo reduction) and luminosity reduction. The primary objective is to reduce both short range (resonant) and long range (resistive) deflecting wakefields from collimators that reduce the luminosity of the machine. We consider the CLIC BDS (beam delivery system) and examine the potential for using dielectric rather than highly conducting materials for collimation. We present some examples of the flexibility gained by having control over the permittivity and conductivity of the collimator. We discuss simulation efforts with BBU-3000, Arrakis, and other proprietary and commercial codes. We have also proposed impedance measurements of low conductivity and dielectric collimator prototypes at the new FACET facility at SLAC, which provides unprecedented short drive bunches and the availability of a witness beam to probe the induced wakefields