76 research outputs found
Effect of raw materials on the performance of 3D printing geopolymer: A review
Traditional construction materials such as cement products release a significant amount of carbon dioxide during their preparation and usage, negatively impacting on the environment. In contrast, 3D printing (3DP) with geopolymer materials utilises renewable and low-carbon emission raw materials. It also exhibits characteristics such as energy efficiency and resource-efficient utilisation, contributing to reduction in carbon emissions and an improvement in sustainability. Therefore, the development of 3DP geopolymer holds great significance. This paper provides a comprehensive review of 3DP geopolymer systems, examining the effect of raw materials on processability, including flowability and thixotropy, and microstructure. The study also delves into sustainability and environmental impact. The evaluation highlights the crucial role of silicon, aluminium, and calcium content in the silicate raw material, influencing the gel structure and microstructural development of the geopolymer. Aluminium promotes reaction rate, increases reaction degree, and aids in product formation. Silicon enhances the mechanical properties of geopolymer, while calcium facilitates the formation and stability of the three-dimensional network structure, further improving material strength and stability. Moreover, the reactivity of raw materials is a key factor affecting interlayer bonding and interface mechanical properties. Finally, considering sustainability, the selection of raw materials is crucial in reducing carbon emissions, energy consumption, and costs. Compared to Portland cement, 3DP geopolymer material demonstrate lower carbon emissions, energy consumption, and costs, thus making it a sustainable material
Superconductivity and vortex structure on BiTe/FeTeSe heterostructures with different thickness of BiTe films
Using scanning tunnel microscopy (STM), we investigate the superconductivity
and vortex properties in topological insulator BiTe thin films
grown on the iron-based superconductor FeTeSe. The
proximity-induced superconductivity weakens in the BiTe film when
the thickness of the film increases. Unlike the elongated shape of vortex cores
observed in the BiTe film with 2-quintuple-layer (QL) thickness,
the isolated vortex cores exhibit a star shape with six rays in the 1-QL film,
and the rays are along the crystalline axes of the film. This is consistent
with the sixfold rotational symmetry of the film lattice, and the
proximity-induced superconductivity is still topologically trivial in the 1-QL
film. At a high magnetic field, when the direction between the two nearest
neighbored vortices deviates from that of any crystalline axes, two cores
connect each other by a pair of adjacent rays, forming a new type of electronic
structure of vortex cores. On the 3-QL film, the vortex cores elongate along
one of the crystalline axes of the BiTe film, similar to the
results obtained on 2-QL films. The elongated vortex cores indicate a twofold
symmetry of the superconducting gap induced by topological superconductivity
with odd parity. This observation confirms possible topological
superconductivity in heterostructures with a thickness of more than 2 QLs. Our
results provide rich information for the vortex cores and vortex-bound states
on the heterostructures consisting of the topological insulator and the
iron-based superconductor.Comment: 8 pages, 8 figure
EPCFormer: Expression Prompt Collaboration Transformer for Universal Referring Video Object Segmentation
Audio-guided Video Object Segmentation (A-VOS) and Referring Video Object
Segmentation (R-VOS) are two highly-related tasks, which both aim to segment
specific objects from video sequences according to user-provided expression
prompts. However, due to the challenges in modeling representations for
different modalities, contemporary methods struggle to strike a balance between
interaction flexibility and high-precision localization and segmentation. In
this paper, we address this problem from two perspectives: the alignment
representation of audio and text and the deep interaction among audio, text,
and visual features. First, we propose a universal architecture, the Expression
Prompt Collaboration Transformer, herein EPCFormer. Next, we propose an
Expression Alignment (EA) mechanism for audio and text expressions. By
introducing contrastive learning for audio and text expressions, the proposed
EPCFormer realizes comprehension of the semantic equivalence between audio and
text expressions denoting the same objects. Then, to facilitate deep
interactions among audio, text, and video features, we introduce an
Expression-Visual Attention (EVA) mechanism. The knowledge of video object
segmentation in terms of the expression prompts can seamlessly transfer between
the two tasks by deeply exploring complementary cues between text and audio.
Experiments on well-recognized benchmarks demonstrate that our universal
EPCFormer attains state-of-the-art results on both tasks. The source code of
EPCFormer will be made publicly available at
https://github.com/lab206/EPCFormer.Comment: The source code will be made publicly available at
https://github.com/lab206/EPCForme
Efficacy and safety of pharmacotherapy for refractory or unexplained chronic cough: a systematic review and network meta-analysis
Background: Refractory chronic cough (RCC) has a significant impact on patient's health-related quality of life and represents a challenge in clinical management. However, the optimal treatment for RCC remains controversial. This study aimed to investigate and compare the efficacy and safety of the current pharmacological therapeutic options for RCC. Methods: A systematic review was performed by searching PubMed, Web of Science, Embase, and Ovid databases from January 1, 2008 to March 1, 2023. All randomised control trials (RCTs) reporting outcomes of efficacy or/and safety were included in the Bayesian network meta-analysis. Here, we compared the effects on Leicester Cough Questionnaire (LCQ), Visual Analogue Scale (VAS), and objective cough frequency of patients with RCC. Besides, we also compared the incidence of adverse events (AEs) for analysis of safety. PROSPERO registration: CRD42022345940. Findings: 19 eligible RCTs included 3326 patients and 7 medication categories: P2X3 antagonist, GABA modulator, Transient Receptor Potential (TRP) modulator, NK-1 agonist, opioid analgesic, macrolide, and sodium cromoglicate. Compared with placebo, mean difference (MD) of LCQ and 24 h cough frequency for P2X3 antagonist relief were 1.637 (95% CI: 0.887–2.387) and −11.042 (P = 0.035). Compared with placebo, effect sizes (MD for LCQ and cough severity VAS) for GABA modulator were 1.347 (P = 0.003) and −7.843 (P = 0.003). In the network meta-analysis, gefapixant is the most effective treatment for patients with RCC (The Surface Under the Cumulative Ranking Curves (SUCRA) is 0.711 in LCQ, 0.983 in 24 h cough frequency, and 0.786 in cough severity VAS). Lesogaberan had better efficacy than placebo (SUCRA: 0.632 vs. 0.472) in 24 h cough frequency. Eliapixant and lesogaberan had better efficacy than placebo in cough severity VAS. However, TRP modulator had worse efficacy than placebo. In the meta-analysis of AEs, the present study found P2X3 antagonist had a significant correlation to AEs (RR: 1.129, 95% CI: 1.012–1.259), especially taste-related AEs (RR: 6.216, P < 0.05). Interpretation: In this network meta-analysis, P2X3 antagonist showing advantages in terms of efficacy is currently the most promising medication for treatment of RCC. GABA modulator also showed potential efficacy for RCC but with AEs of the central system. Nevertheless, the role of TRP modulator needed to be revisited. Further research is needed to determine the potential beneficiary population for optimizing the pharmacological management of chronic cough. Funding: National Natural Science Foundation of China ( 81870079), Guangdong Science and Technology Project ( 2021A050520012), Incubation Program of National Science Foundation for Distinguished Young Scholars ( GMU2020-207)
A fiber-guided motorised rotation laser scanning thermography technique for impact damage crack inspection in composites
Laser Thermography manifests superior sensitivity and compatibility to detect cracks and small subsurface defects. However, the existing related systems have limitations on either inspection efficiency or unknown directional cracks due to the utilization of stationary heat sources. This article reports a Fiber-guided Motorised Rotation Laser-line Scanning Thermography (FMRLST) system aiming to rapidly inspect cracks of impact damage with unknown direction in composite laminates. An optical head with fibre delivery integrated with a rotation motor is designed and developed to generate novel scanning heating in a circumferential rotation manner. A FEM model is first proposed to simulate the principle of FMRLST testing and produce thermograms for the development of post-processing methods. A damage enhancement method based on Curvelet Transform is developed to enhance the visualization of thermal features of cracks, and purify the resulting image by suppressing the laser-line heating pattern and cancelling noise. The validation on three composite specimens with different levels of impact damage suggests the developed FMRLST system can extract unknown impact surface cracks efficiently. The remarkable sensitivity and flexibility of FMRLST to arbitrary cracks, along with the miniaturized probe-like inspection unit, present its potential in on-site thermographic inspection, and its design is promising to push the LST towards
Visualized Experiment of Bubble Behaviors in a Vertical Narrow Rectangular Channel Under Natural Circulation Condition
The characteristics of bubble behavior have been in particular interest for decades due to its significant contribution to understanding the mechanism of heat transfer. In the present work, visualized experiment is conducted to study the bubble characteristics in subcooled flow boiling of a narrow rectangular channel under natural circulation. The experiments were performed at pressures of 0.2 MPa, with inlet subcooling ranging from 20 to 60 K and heat flux ranging from 100 to 300 kW/m2. A high-speed digital camera is used to capture the pictures of bubble behaviors. A sequence of image processing algorithms is used deal with the original bubble images to get relevant bubble parameters. We observe the whole process of a single sliding bubble lifetime and found most of bubbles slide along the heating surface after detaching the nucleation sites. Five typical sliding bubble growth paths are observed in the present experimental conditions. According to the analysis of the experimental data, it can be found that the liquid subcooling and wall superheat are the main factors that affect the bubble size during sliding in narrow rectangular channel under natural circulation condition. Due to the difference of driving force, the sliding velocity of bubble in forced circulation is always larger than that in natural circulation. At the same time, the bubble velocity changes significantly at different heat flux and shooting location
- …