231 research outputs found
Hydrogenase biomimetics: Fe2(CO)4(μ-dppf)(μ-pdt) (dppf = 1,1'-bis(diphenylphosphino)ferrocene) both a proton-reduction and hydrogen oxidation catalyst.
Fe2(CO)4(μ-dppf)(μ-pdt) catalyses the conversion of protons and electrons into hydrogen and also the reverse reaction thus mimicing both types of binuclear hydrogenase enzymes
Hydrogenase biomimetics with redox-active ligands: Electrocatalytic proton reduction by [Fe2(CO)4(κ2-diamine)(μ-edt)] (diamine = 2,2′-bipy, 1,10-phen)
Diiron complexes bearing redox active diamine ligands have been studied as models of the active site of [FeFe]-hydrogenases. Heating [Fe2(CO)6(μ-edt)] (edt = 1,2-ethanedithiolate) with 2,2′-bipyridine (2,2′-bipy) or 1,10-phenanthroline (1,10-phen) in MeCN in the presence of Me3NO leads to the formation of [Fe2(CO)4(κ2-2,2′-bipy)(μ-edt)] (1-edt) and [Fe2(CO)4(κ2-1,10-phen)(μ-edt)] (2-edt), respectively, in moderate yields. In the solid state the diamine resides in dibasal sites, while both dibasal and apical–basal isomers are present in solution. Both stereoisomers protonate readily upon addition of strong acids. Cyclic voltammetry in MeCN shows that both complexes undergo irreversible oxidation and reduction, proposed to be a one- and two-electron process, respectively. The structures of neutral 2-edt and its corresponding one- and two-electron reduced species have been investigated by DFT calculations. In 2-edt− the added electron occupies a predominantly ligand-based orbital, and the iron–iron bond is maintained, being only slightly elongated. Addition of the second electron affords an open-shell triplet dianion where the second electron populates an Fe–Fe σ* antibonding orbital, resulting in effective scission of the iron–iron bond. The triplet state lies 4.2 kcal mol−1 lower in energy than the closed-shell singlet dianion whose HOMO correlates nicely with the LUMO of the neutral species 2-edt. Electrocatalytic proton reduction by both complexes has been studied in MeCN using CF3CO2H as the proton source. These catalysis studies reveal that while at high acid concentrations the active catalytic species is [Fe2(CO)4(μ-H)(κ2-diamine)(μ-edt)]+, at low acid concentrations the two complexes follow different catalytic mechanisms being associated with differences in their relative rates of protonation
Synthesis, Molecular Structures and Electrochemical Investigations of [FeFe]-Hydrogenase Biomimics [Fe₂(CO)_{6-n}(EPh₃)_{n}(mu-edt)] (E = P, As, Sb; n = 1, 2)
A series of ethane‐dithiolate (edt = S(CH_{2})_{2}S) complexes [Fe_{2}(CO)_{5}(EPh_{3})(µ‐edt)] and [Fe_{2}(CO)4(EPh_{3})_{2}(µ‐edt)] (E = P, As, Sb), biomimics of the core of [FeFe]‐hydrogenases, have been prepared and structurally characterised. The introduced ligand(s) occupies apical sites lying trans to the iron‐iron bond. NMR studies reveal that while in the mono‐substituted complexes the Fe(CO)_{3} moiety undergoes facile trigonal rotation, the Fe(CO)2(PPh3) centres do not rotate on the NMR timescale. The reductive chemistry has been examined by cyclic voltammetry both in the presence and absence of CO and the observed behavior is found to be dependent upon the nature of the substituents. With L = CO or SbPh_{3} potential inversion is seen leading to a two‐electron reduction, while for others (L = PPh_{3}, AsPh_{3}) a quasi‐reversible one‐electron reduction is observed. Protonation studies reveal that [Fe_{2}(CO)_{5}(PPh_{3})(µ‐edt)] is only partially protonated by excess HBF_{4}·Et_{2}O, thus ruling complexes [Fe_{2}(CO)_{5}(EPh3)(µ‐edt)(µ‐H)]^{+} out as a catalytic intermediates, but [Fe_{2}(CO)_{4}(PPh_{3})_{2}(µ‐edt)] reacts readily with HBF_{4}·Et_{2}O to produce [Fe_{2}(CO)_{4}(PPh3)_{2}(µ‐edt)(µ‐H)]^{+}. While all new complexes are catalysts for the reduction of protons in MeCN, their poor stability and relatively high reduction potentials does not make them attractive in this respect
Consumption of resistant starch decreases postprandial lipogenesis in white adipose tissue of the rat
Chronic consumption of diets high in resistant starch (RS) leads to reduced fat cell size compared to diets high in digestible starch (DS) in rats and increases total and meal fat oxidation in humans. The aim of the present study was to examine the rate of lipogenesis in key lipogenic organs following a high RS or DS meal. Following an overnight fast, male Wistar rats ingested a meal with an RS content of 2% or 30% of total carbohydrate and were then administered an i.p bolus of 50 μCi (3)H(2)O either immediately or 1 hour post-meal. One hour following tracer administration, rats were sacrificed, a blood sample collected, and the liver, white adipose tissue (WAT), and gastrocnemius muscle excised and frozen until assayed for total (3)H-lipid and (3)H-glycogen content. Plasma triglyceride and NEFA concentrations and (3)H-glycogen content did not differ between groups. In all tissues, except the liver, there was a trend for the rate of lipogenesis to be higher in the DS group than the RS group which reached significance only in WAT at 1 h (p < 0.01). On a whole body level, this attenuation of fat deposition in WAT in response to a RS diet could be significant for the prevention of weight gain in the long-term
Mixed main group transition metal clusters: Reactions of [Ru 3 (CO) 10 (μ-dppm)] with Ph 3 SnH
Novel dppm-ligated ruthenium-tin clusters have been prepared from the reaction of [Ru3(CO)10(μ-dppm)] with Ph3SnH. At room temperature and in the presence of Me3NO, [Ru3(CO)9(SnPh3) (μ-dppm) (μ-H)] (1) is produced from the formal loss of CO and Sn-H bond oxidative-addition. Treatment of 1 with a further two equivalents of Ph3SnH (in the presence of Me3NO) gave [Ru3(CO)7(SnPh3)2(μ-SnPh2)(μ-dppm)(μ-H)(μ3-H)] (2) which results from both Sn–H and Sn–C bond scission and contains two different hydride environments (μ and μ3) and a μ-SnPh2 moiety. Cluster 2 has 48 CVE (cluster valence electron) with three formal ruthenium-ruthenium bonds; two of those are very long and fall at the extreme end of distances attributed to ruthenium-ruthenium bonds. Thermolysis of 2 at 66 °C liberates benzene to give [Ru3(CO)8(SnPh3)(μ-SnPh2)(μ3-SnPh2)(μ-dppm)(μ-H)] (3). DFT calculations confirm that the hydride bridges one of the Ru-μ-SnPh2 bonds in 3. The solid-state structures of 2 and 3 have been determined by X-ray crystallography, and the bonding and ligand distribution have been investigated by DFT studies. The geometry-optimized structures are consistent with the solid-state structures
Alkyne activation and polyhedral reorganization in benzothiazolate-capped osmium clusters on reaction with diethyl acetylenedicarboxylate (DEAD) and ethyl propiolate
The reactivity of the face-capped benzothiazolate clusters HOs3(CO)9[μ3-C7H3(R)NS] (1a, R = H; 1b, R = 2-CH3) with alkynes has been investigated. 1a reacts with DEAD at 67 °C to furnish the isomeric alkenyl clusters Os3(CO)9(μ-C7H4NS)(μ3-EtO2CCCHCO2Et) (2a and 3a). X-ray crystallographic analyses of 2a and 3a have confirmed the stereoisomeric relationship of these products and the regiospecific polyhedral expansion that follows the formal transfer of the hydride to the coordinated alkyne ligand in HOs3(CO)9(μ-C7H4NS)(2-DEAD). The significant structural differences between the two isomers, as revealed by the solid-state structures, derives from the regiospecific cleavage of one of the three Os-Os bonds in the intermediate alkenyl cluster Os3(CO)9(μ-C7H4NS)(1-EtO2CCCHCO2Et), which follows hydride transfer to the coordinated alkyne ligand in the pi compound HOs3(CO)9(μ-C7H4NS)(2-DEAD). Control experiments confirm the reversibility of the reaction leading to the formation of 2a and 3a. Whereas heating either isomer in refluxing THF or benzene affords a binary mixture containing 2a and 3a, thermolysis in refluxing toluene leads to the activation of the alkenyl ligand and formation of the new cluster Os3(CO)9(μ-C7H4NS)(μ3-EtO2CCCH2) (4). 4 was independently synthesized from 1a and ethyl propiolate at room temperature. The computed mechanisms that account for the formation of 2a and 3a are presented, along with the mechanism for the reaction of 1a with ethyl propiolate to give 4
Techniques for Arbuscular Mycorrhiza Inoculum Reduction
It is well established that arbuscular mycorrhizal (AM) fungi can play a significant role in sustainable crop production and environmental conservation. With the increasing awareness of the ecological significance of mycorrhizas and their diversity, research needs to be directed away from simple records of their occurrence or casual speculation of their function (Smith and Read 1997). Rather, the need is for empirical studies and investigations of the quantitative aspects of the distribution of different types and their contribution to the function of ecosystems.
There is no such thing as a fungal effect or a plant effect, but there is an interaction between both symbionts. This results from the AM fungi and plant community size and structure, soil and climatic conditions, and the interplay between all these factors (Kahiluoto et al. 2000). Consequently, it is readily understood that it is the problems associated with methodology that limit our understanding of the functioning and effects of AM fungi within field communities.
Given the ubiquous presence of AM fungi, a major constraint to the evaluation of the activity of AM colonisation has been the need to account for the indigenous soil native inoculum. This has to be controlled (i.e. reduced or eliminated) if we are to obtain a true control treatment for analysis of arbuscular mycorrhizas in natural substrates. There are various procedures possible for achieving such an objective, and the purpose of this chapter is to provide details of a number of techniques and present some evaluation of their advantages and disadvantages.
Although there have been a large number of experiments to investigated the effectiveness of different sterilization procedures for reducing pathogenic soil fungi, little information is available on their impact on beneficial organisms such as AM fungi. Furthermore, some of the techniques have been shown to affect physical and chemical soil characteristics as well as eliminate soil microorganisms that can interfere with the development of mycorrhizas, and this creates difficulties in the interpretation of results simply in terms of possible mycorrhizal activity.
An important subject is the differentiation of methods that involve sterilization from those focussed on indigenous inoculum reduction. Soil sterilization aims to destroy or eliminate microbial cells while maintaining the existing chemical and physical characteristics of the soil (Wolf and Skipper 1994). Consequently, it is often used for experiments focussed on specific AM fungi, or to establish a negative control in some other types of study. In contrast, the purpose of inoculum reduction techniques is to create a perturbation that will interfere with mycorrhizal formation, although not necessarily eliminating any component group within the inoculum. Such an approach allows the establishment of different degrees of mycorrhizal formation between treatments and the study of relative effects.
Frequently the basic techniques used to achieve complete sterilization or just an inoculum reduction may be similar but the desired outcome is accomplished by adjustments of the dosage or intensity of the treatment. The ultimate choice of methodology for establishing an adequate non-mycorrhizal control depends on the design of the particular experiments, the facilities available and the amount of soil requiring treatment
Reactions of Ru3(CO)10(μ-dppm) with Ph3GeH: Ge–H and Ge–C bond cleavage in Ph3GeH at triruthenium clusters
The activation of Ph3GeH at the dppm-bridged cluster Ru3(CO)10(μ-dppm) [dppm = bis(diphenylphosphino)methane] has been investigated. Ru3(CO)10(μ-dppm) reacts with Ph3GeH at room temperature in the presence of Me3NO to give the new cluster products Ru3(CO)9(GePh3)(μ-dppm)(μ-H) (1) and Ru3(CO)8(GePh3)2(μ-dppm)(μ-H)2 (2) via successive oxidation-addition of two Ge–H bonds. Refluxing 1 in THF furnishes the diruthenium complex Ru2(CO)6(μ-GePh2)(μ-dppm) (3) as the major product (44%), in addition to Ru3(CO)7(μ-CO)(GePh3){μ3-PhPCH2P(Ph)C6H4}(μ-H) (4) and the known cluster Ru3(CO)9(μ-H)(μ3-Ph2PCH2PPh) (5) in 7 and 8% yields, respectively. Heating samples of cluster 2 also afforded 3 as the major product together with a small amount of Ru3(CO)7(GePh3)(μ-OH)(μ-dppm)(μ-H)2 (6). DFT calculations establish the stability of the different possible isomers for clusters 1, 2, and 6, in addition to providing insight into the mechanism for hydride fluxionality in 2. All new compounds have been characterized by analytical and spectroscopic methods, and the molecular structures of 1, 3, and 6 have been established by single-crystal X-ray diffraction analyses
Reversible C-H bond activation at a triosmium centre: A comparative study of the reactivity of unsaturated triosmium clusters Os3(CO)8(μ-dppm)(μ-H)2 and Os3(CO)8(μ-dppf)(μ-H)2 with activated alkynes
Heating a benzene solution of the unsaturated cluster Os3(CO)8(μ-dppm)(μ-H)2 (1) [dppm = bis(diphenylphosphino)methane] with MeO2CCtriple bond; length of mdashCCO2Me (DMAD) or EtO2CCtriple bond; length of mdashCCO2Et (DEAD) at 80 °C furnished the dinuclear compounds Os2(CO)4(μ-dppm)(μ-η2;η1;к1-RO2CCCHCO2R)(μ-H) (3a, R = Me, 3b, R = Et) and the saturated trinuclear complexes Os3(CO)7(μ-dppm)(μ3-η2;η1;η1-RO2CCCCO2R)(μ-H)2 (4a, R = Me, 4b, R = Et). In contrast, similar reactions using unsaturated Os3(CO)8(μ-dppf)(μ-H)2 (2) [dppf = bis(diphenylphosphino)ferrocene] afforded only the trinuclear complexes Os3(CO)8(μ-dppf)(μ-η2;η1-RO2CCHCCO2R)(μ-H) (5a, R = Me; 5b, R = Et) and Os3(CO)7(μ-dppf)(μ3-η2;η1;η1-RO2CCCCO2R)(μ-H)2 (6a, R = Me; 6b, R = Et). Control experiments confirm that 5a and 5b decarbonylate at 80 °C to give 6a and 6b, respectively. Both 5a and 5b exist as a pair of isomers in solution, as demonstrated by 1H NMR and 31P{1H} NMR spectroscopy. DFT calculations on cluster 5a (as the dppf-Me4 derivative) indicate that the isomeric mixture derives from a torsional motion that promotes the conformational flipping of the cyclopentadienyl groups of the dppf-Me4 ligand relative to the metallic plane. VT NMR measurements on clusters 6a and 6b indicate that while the hydride ligand associated with the dppf-bridged Os-Os bond is nonfluxional at room temperature, the second hydride rapidly oscillates between the two non-dppf-bridged Os-Os edges. DFT examination of this hydride fluxionality confirms a “windshield wiper” motion for the labile hydride that gives rise to a time-average coupling of this hydride to both phosphorus centers of the dppf ligand. Thermolysis of 6a and 6b in refluxing toluene yielded Os3(CO)7(μ-dppf)(μ-η2;η1;к1-CCHCO2R) (7a, R=Me; 7b, R=Et). The vinylidene moieties in 7a and 7b derive from the carbon-carbon bond cleavage of coordinated alkyne ligands, and these two products exhibit high thermal stability in refluxing toluene
- …