Microstructured Ceramic-Coated Carbon Nanotube Surfaces for High Heat Flux Pool Boiling

Stable surfaces with high boiling heat flux are critical to many thermal and energy conversion systems, and it is well-known that the microscale texture and wettability of a surface influences its critical heat flux (CHF). We investigate pool boiling on microstructured ceramic-coated carbon nanotube (CNT) surfaces. CNT microstructures are patterned with precise dimensions over large areas, and a ceramic coating by atomic layer deposition (ALD) imparts stability in the presence of capillary forces and thermal stresses that occur during boiling, achieving a measured CHF as high as 245 W cm-2. We also show that the nanoporosity of the ceramic-CNT microstructures has a negligible influence on the CHF because surface rewetting is dominated by microscale imbibition. The high CHF values achieved on our surfaces are attributed to the micropatterning and the nanoscale surface texture of the CNTs, which accelerate liquid imbibition upon bubble departure. Our findings also suggest further enhancements in CHF can be made by optimizing the microstructure pattern and improving its wettability. Therefore, micropatterned ceramic-CNT composites are a potentially attractive substrate for industrial applications of pool boiling

Sol–Gel Synthesis of Au/Cu-TiO2 Nanocomposite and Their Morphological and Optical Properties

A facile single-step method was adopted to synthesize gold-modified copper-doped titania nanocomposites. Physicochemical properties of the synthesized material were characterized by X-ray diffraction (XRD), diffuse reflectance spectroscopy, photoluminescence (PL), and TEM-based techniques. Our characterizations show that the material consisted of anatase-phase qausi-spherical titania nanoparticles (NPs), with 3-4-nm gold particles anchored on titania surface. According to diffuse UV-visible spectroscopic analysis, gold-modified copper-doped titania shows enhanced absorption in the visible-light spectrum compared with copper-doped titania and pure titania. Furthermore, a decrease in PL emission intensity is observed, and this is due to decreased electron-hole recombination, which is an attribute desired for the enhancement of photocatalytic activity. Our present results highlight that these nanocomposites could be used as a photocatalyst for various applications in conjunction with visible solar radiation. The surface modifications make this material for many applications such as gas sensing and photodetection. © 2009-2012 IEEE

Preparation and characterization of composites from starch with sugarcane bagasse nanofibres

This paper reports on the results of using unbleached sugar cane bagasse nanofibres (average diameter 26.5 nm; aspect ratio 247 assuming a dry fibre density of 1,500 kg/m3) to improve the physico-chemical properties of starch-based films. The addition of bagasse nanofibres (2.5 to 20 wt%) to modified potato starch (i.e. soluble starch) reduced the moisture uptake by up to 17 % at 58 % relative humidity. The film’s tensile strength and Young’s modulus increased by up to 100 % (3.1 to 6.2 MPa) and 300 % (66.3 to 198.3 MPa) respectively with 10 and 20 wt% fibre addition. However, the strain at yield dropped by 50 % for the film containing 10 wt% fibre. Models for composite materials were used to account for the strong interactions between the nanofibres and the starch matrix. The storage and loss moduli as well as the glass transition temperature (Tg) obtained from dynamic mechanical thermal analysis, were increased with the starch-nanofibre films indicating decreased starch chain mobility due to the interacting effect of the nanofibres. Evidence of the existence of strong interactions between the starch matrix and the nanofibres was revealed from detailed Fourier transform infra-red and scanning electron microscopic evaluation

Dropwise Condensation of Low Surface Tension Fluids on Omniphobic Surfaces

Compared to the significant body of work devoted to surface engineering for promoting dropwise condensation heat transfer of steam, much less attention has been dedicated to fluids with lower interfacial tension. A vast array of low-surface tension fluids such as hydrocarbons, cryogens, and fluorinated refrigerants are used in a number of industrial applications, and the development of passive means for increasing their condensation heat transfer coefficients has potential for significant efficiency enhancements. Here we investigate condensation behavior of a variety of liquids with surface tensions in the range of 12 to 28 mN/m on three types of omniphobic surfaces: smooth oleophobic, re-entrant superomniphobic, and lubricant-impregnated surfaces. We demonstrate that although smooth oleophobic and lubricant-impregnated surfaces can promote dropwise condensation of the majority of these fluids, re-entrant omniphobic surfaces became flooded and reverted to filmwise condensation. We also demonstrate that on the lubricant-impregnated surfaces, the choice of lubricant and underlying surface texture play a crucial role in stabilizing the lubricant and reducing pinning of the condensate. With properly engineered surfaces to promote dropwise condensation of low-surface tension fluids, we demonstrate a four to eight-fold improvement in the heat transfer coefficient