111 research outputs found

    Preparation and ferroelectric properties of (124)-oriented SrBi4Ti4O15 ferroelectric thin film on (110)-oriented LaNiO3 electrode

    Full text link
    A (124)-oriented SrBi4Ti4O15 (SBTi) ferroelectric thin film with high volume fraction of {\alpha}SBTi(124)=97% was obtained using a metal organic decomposition process on SiO2/Si substrate coated by (110)-oriented LaNiO3 (LNO) thin film. The remanent polarization and coercive field for (124)-oriented SBTi film are 12.1 {\mu}C/cm2 and 74 kV/cm, respectively. No evident fatigue of (124)-oriented SBTi thin film can be observed after 1{\times}10e9 switching cycles. Besides, the (124)-oriented SBTi film can be uniformly polarized over large areas using a piezoelectric-mode atomic force microscope. Considering that the annealing temperature was 650{\deg}C and the thickness of each deposited layer was merely 30 nm, a long-range epitaxial relationship between SBTi(124) and LNO(110) facets was proposed. The epitaxial relationship was demonstrated based on the crystal structures of SBTi and LNO.Comment: 11 pages, 4 figures, published in Journal of Materials Science: Materials in Electronics (JMSE), 19 (2008), 1031-103

    Using smart meters to estimate low voltage losses

    Get PDF
    Losses on low voltage networks are often substantial. For example, in the UK they have been estimated as being 4% of the energy supplied by low voltage networks. However, the breakdown of the losses to individual conductors and their split over time are poorly understood as generally only the peak demands and average loads over several months have been recorded. The introduction of domestic smart meters has the potential to change this. How domestic smart meter readings can be used to estimate the actual losses is analysed. In particular, the accuracy of using 30 minute readings compared with 1 minute readings, and how this accuracy could be improved, were investigated. This was achieved by assigning the data recorded by 100 smart meters with a time resolution of 1 minute to three test networks. Smart meter data from three sources were used in the investigation. It was found that 30 minute resolution data underestimated the losses by between 9% and 24%. By fitting an appropriate model to the data, it was possible to reduce the inaccuracy by approximately 50%. Having a smart meter time resolution of 10 minutes rather than 30 gave little improvement to the accuracy

    Bedforms and sedimentary structures related to supercritical flows in glacigenic settings

    Get PDF
    Upper-flow-regime bedforms, including upper-stage-plane beds, antidunes, chutes-and-pools and cyclic steps, are ubiquitous in glacigenic depositional environments characterized by abundant meltwater discharge and sediment supply. In this study, the depositional record of Froude near-critical and supercritical flows in glacigenic settings is reviewed, and similarities and differences between different depositional environments are discussed. Upper-flow-regime bedforms may occur in subglacial, subaerial and subaqueous environments, recording deposition by free-surface flows and submerged density flows. Although individual bedform types are generally not indicative of any specific depositional environment, some observed trends are similar to those documented in non-glacigenic settings. Important parameters for bedform evolution that differ between depositional environments include flow confinement, bed slope, aggradation rate and grain size. Cyclic-step deposits are more common in confined settings, like channels or incised valleys, or steep slopes of coarse-grained deltas. Antidune deposits prevail in unconfined settings and on more gentle slopes, like glacifluvial fans, sand-rich delta slopes or subaqueous (ice-contact) fans. At low aggradation rates, only the basal portions of bedforms are preserved, such as scour fills related to the hydraulic-jump zone of cyclic steps or antidune-wave breaking, which are common in glacifluvial systems and during glacial lake-outburst floods and (related) lake-level falls. Higher aggradation rates result in increased preservation potential, possibly leading to the preservation of complete bedforms. Such conditions are met in sediment-laden jökulhlaups and subaqueous proglacial environments characterized by expanding density flows. Coarser-grained sediment leads to steeper bedform profiles and highly scoured facies architectures, while finer-grained deposits display less steep bedform architectures. Such differences are in part related to stronger flows, faster settling of coarse clasts, and more rapid breaking of antidune waves or hydraulic-jump formation over hydraulically rough beds. © 2020 The Authors. Sedimentology published by John Wiley & Sons Ltd on behalf of International Association of Sedimentologist

    Study of B^{+-} -> K^{+-}(K_S K pi)^0 Decay and Determination of eta_c and eta_c(2S) Parameters

    Get PDF
    We report the results of a study of B±→K±ηcB^{\pm}\to K^{\pm}\eta_c and B±→K±ηc(2S)B^{\pm}\to K^{\pm}\eta_c(2S) decays followed by ηc\eta_c and ηc(2S)\eta_c(2S) decays to (KSKπ)0(K_SK\pi)^0. The results are obtained from a data sample containing 535 million BBˉB\bar{B}-meson pairs collected by the Belle experiment at the KEKB e+e−e^+e^- collider. We measure the products of the branching fractions B(B±→K±ηc)B(ηc→KSK±π∓)=(26.7±1.4(stat)−2.6+2.9(syst)±4.9(model))×10−6{\mathcal B}(B^{\pm}\to K^{\pm}\eta_c){\mathcal B}(\eta_c\to K_S K^{\pm}\pi^{\mp})=(26.7\pm 1.4(stat)^{+2.9}_{-2.6}(syst)\pm 4.9(model))\times 10^{-6} and B(B±→K±ηc(2S))B(ηc(2S)→KSK±π∓)=(3.4−1.5+2.2(stat+model)−0.4+0.5syst))×10−6{\mathcal B}(B^{\pm}\to K^{\pm}\eta_c(2S)){\mathcal B}(\eta_c(2S)\to K_S K^{\pm}\pi^{\mp})=(3.4^{+2.2}_{-1.5}(stat+model)^{+0.5}_{-0.4} syst))\times 10^{-6}. Interference with the non-resonant component leads to significant model uncertainty in the measurement of these product branching fractions. Our analysis accounts for this interference and allows the model uncertainty to be reduced. We also obtain the following charmonia masses and widths: M(ηc)=(2985.4±1.5(stat)−2.0+0.5(syst))M(\eta_c)=(2985.4\pm 1.5(stat)^{+0.5}_{-2.0}(syst)) MeV/c2c^2, Γ(ηc)=(35.1±3.1(stat)−1.6+1.0(syst))\Gamma(\eta_c)=(35.1\pm 3.1(stat)^{+1.0}_{-1.6}(syst)) MeV/c2c^2, M(ηc(2S))=(3636.1−4.2+3.9(stat+model)−2.0+0.7(syst))M(\eta_c(2S))=(3636.1^{+3.9}_{-4.2}(stat+model)^{+0.7}_{-2.0}(syst)) MeV/c2c^2, Γ(ηc(2S))=(6.6−5.1+8.4(stat+model)−0.9+2.6(syst))\Gamma(\eta_c(2S))=(6.6^{+8.4}_{-5.1}(stat+model)^{+2.6}_{-0.9}(syst)) MeV/c2c^2.Comment: 23 pages, 10 figures, submitted to PL

    Search for Lepton-Flavor-Violating tau Decays into a Lepton and a Vector Meson

    Full text link
    We search for lepton-flavor-violating tau-> ell V^0 decays, where ell is an electron or muon and V^0 is one of the vector mesons rho^0, phi, omega, K*0 and K*0-bar. We use 854 fb^{-1} of data collected with the Belle detector at the KEKB asymmetric-energy e^+e^- collider. No evidence for a signal is found in any decay mode, and we obtain 90% confidence level upper limits on the individual branching fractions in the range (1.2-8.4)*10^{-8}.Comment: 13 pages, 5 figures, submitted to Phys. Lett.

    Measurement of D0-D0 mixing and search for CP violation in D0→K+K-,π+π- decays with the full Belle data set

    Get PDF
    We report an improved measurement of D0 – D‟0 mixing and a search for CP violation in D0 decays to CP -even final states K+K− and π+π− . The measurement is based on the final Belle data sample of 976 fb −1 . The results are yCP=(1.11±0.22±0.09)% and AΓ=(−0.03±0.20±0.07)% , where the first uncertainty is statistical and the second is systematic

    Risk profiles and one-year outcomes of patients with newly diagnosed atrial fibrillation in India: Insights from the GARFIELD-AF Registry.

    Get PDF
    BACKGROUND: The Global Anticoagulant Registry in the FIELD-Atrial Fibrillation (GARFIELD-AF) is an ongoing prospective noninterventional registry, which is providing important information on the baseline characteristics, treatment patterns, and 1-year outcomes in patients with newly diagnosed non-valvular atrial fibrillation (NVAF). This report describes data from Indian patients recruited in this registry. METHODS AND RESULTS: A total of 52,014 patients with newly diagnosed AF were enrolled globally; of these, 1388 patients were recruited from 26 sites within India (2012-2016). In India, the mean age was 65.8 years at diagnosis of NVAF. Hypertension was the most prevalent risk factor for AF, present in 68.5% of patients from India and in 76.3% of patients globally (P < 0.001). Diabetes and coronary artery disease (CAD) were prevalent in 36.2% and 28.1% of patients as compared with global prevalence of 22.2% and 21.6%, respectively (P < 0.001 for both). Antiplatelet therapy was the most common antithrombotic treatment in India. With increasing stroke risk, however, patients were more likely to receive oral anticoagulant therapy [mainly vitamin K antagonist (VKA)], but average international normalized ratio (INR) was lower among Indian patients [median INR value 1.6 (interquartile range {IQR}: 1.3-2.3) versus 2.3 (IQR 1.8-2.8) (P < 0.001)]. Compared with other countries, patients from India had markedly higher rates of all-cause mortality [7.68 per 100 person-years (95% confidence interval 6.32-9.35) vs 4.34 (4.16-4.53), P < 0.0001], while rates of stroke/systemic embolism and major bleeding were lower after 1 year of follow-up. CONCLUSION: Compared to previously published registries from India, the GARFIELD-AF registry describes clinical profiles and outcomes in Indian patients with AF of a different etiology. The registry data show that compared to the rest of the world, Indian AF patients are younger in age and have more diabetes and CAD. Patients with a higher stroke risk are more likely to receive anticoagulation therapy with VKA but are underdosed compared with the global average in the GARFIELD-AF. CLINICAL TRIAL REGISTRATION-URL: http://www.clinicaltrials.gov. Unique identifier: NCT01090362

    Measurement of time-dependent CP violation in B-0 - eta \u27 K-0 decays

    Get PDF

    Polymorphism: an evaluation of the potential risk to the quality of drug products from the FarmĂĄcia Popular Rede PrĂłpria

    Get PDF
    Polymorphism in solids is a common phenomenon in drugs, which can lead to compromised quality due to changes in their physicochemical properties, particularly solubility, and, therefore, reduce bioavailability. Herein, a bibliographic survey was performed based on key issues and studies related to polymorphism in active pharmaceutical ingredient (APIs) present in medications from the Farm&#225;cia Popular Rede Pr&#243;pria. Polymorphism must be controlled to prevent possible ineffective therapy and/or improper dosage. Few mandatory tests for the identification and control of polymorphism in medications are currently available, which can result in serious public health concerns

    The polarized image of a synchrotron-emitting ring of gas orbiting a black hole

    Get PDF
    High Energy Astrophysic
    • 

    corecore