The Deposition of Metallic Phases on Polymers with Different Electronic Conductivity and Catalytic Activity

The growth of metallic phases and the kinetics of this process are mainly dependent on the electronic conductivity and catalytic activity of the substrate. In this work we used electrodes covered with different polymer films. The conductivity and the number of growth sites of these modified electrodes was changed by the monomer (in the polymer chain or by the polarization. We used the metallic conducting polyaniline as deposited material. From the experimental data current density i and change of mass m as function of time, we got informations about the different steps of electropolymerization as nucleation and growth of a homogeneous film. This investigation shows that the number of growing centers plays an important role and can be varied with the substrate. A modification with semiconducting or insulating polymers, of course, is not useful to accelerate the growth. Further characteristic quantities like the rate of the growth can be calculated and their in-situ-transients are depicted. Additionally the electronic behaviour of the used substrate can be characterized

Tema Con Variazioni: Quantum Channel Capacity

Channel capacity describes the size of the nearly ideal channels, which can be obtained from many uses of a given channel, using an optimal error correcting code. In this paper we collect and compare minor and major variations in the mathematically precise statements of this idea which have been put forward in the literature. We show that all the variations considered lead to equivalent capacity definitions. In particular, it makes no difference whether one requires mean or maximal errors to go to zero, and it makes no difference whether errors are required to vanish for any sequence of block sizes compatible with the rate, or only for one infinite sequence.Comment: 32 pages, uses iopart.cl

The nucleotide and partial amino acid sequences of rat fetuin

Fetuins are among the major plasma proteins, yet their biological role has remained elusive. Here we report the molecular cloning of rat fetuin and the sequence analysis of a full-length clone, RF619 of 1456 bp with an open reading frame of 1056 bp encoding 352 amino acid residues. The coding part of RF619 was identical with the cDNA sequence of the natural inhibitor of the insulin receptor tyrosine kinase from rat (pp63) except for four substitutions and a single base insertion causing divergence of the predicted protein sequences. Partial amino acid sequences of rat plasma fetuin were in agreement with the predictions based on the RF619 cDNA. Purified rat fetuin inhibited the insulin receptor tyrosine kinase in vitro. Therefore, we conclude that RF619 and pp63 cDNA encode the same protein, i.e. authentic rat fetuin which is a functional tyrosine kinase inhibitor

Typical support and Sanov large deviations of correlated states

Discrete stationary classical processes as well as quantum lattice states are asymptotically confined to their respective typical support, the exponential growth rate of which is given by the (maximal ergodic) entropy. In the iid case the distinguishability of typical supports can be asymptotically specified by means of the relative entropy, according to Sanov's theorem. We give an extension to the correlated case, referring to the newly introduced class of HP-states.Comment: 29 pages, no figures, references adde

Pseudo-single crystal electrochemistry on polycrystalline electrodes : visualizing activity at grains and grain boundaries on platinum for the Fe2+/Fe3+ redox reaction

The influence of electrode surface structure on electrochemical reaction rates and mechanisms is a major theme in electrochemical research, especially as electrodes with inherent structural heterogeneities are used ubiquitously. Yet, probing local electrochemistry and surface structure at complex surfaces is challenging. In this paper, high spatial resolution scanning electrochemical cell microscopy (SECCM) complemented with electron backscatter diffraction (EBSD) is demonstrated as a means of performing ‘pseudo-single-crystal’ electrochemical measurements at individual grains of a polycrystalline platinum electrode, while also allowing grain boundaries to be probed. Using the Fe2+/3+ couple as an illustrative case, a strong correlation is found between local surface structure and electrochemical activity. Variations in electrochemical activity for individual high index grains, visualized in a weakly adsorbing perchlorate medium, show that there is higher activity on grains with a significant (101) orientation contribution, compared to those with (001) and (111) contribution, consistent with findings on single-crystal electrodes. Interestingly, for Fe2+ oxidation in a sulfate medium a different pattern of activity emerges. Here, SECCM reveals only minor variations in activity between individual grains, again consistent with single-crystal studies, with a greatly enhanced activity at grain boundaries. This suggests that these sites may contribute significantly to the overall electrochemical behavior measured on the macroscale

Ultrafast All-Polymer Paper-Based Batteries

Conducting polymers for battery applications have been subject to numerous investigations during the last two decades. However, the functional charging rates and the cycling stabilities have so far been found to be insufficient for practical applications. These shortcomings can, at least partially, be explained by the fact that thick layers of the conducting polymers have been used to obtain sufficient capacities of the batteries. In the present letter, we introduce a novel nanostructured high-surface area electrode material for energy storage applications composed of cellulose fibers of algal origin individually coated with a 50 nm thin layer of polypyrrole. Our results show the hitherto highest reported charge capacities and charging rates for an all polymer paper-based battery. The composite conductive paper material is shown to have a specific surface area of 80 m2 g-1 and batteries based on this material can be charged with currents as high as 600 mA cm-2 with only 6 % loss in capacity over 100 subsequent charge and discharge cycles. The aqueous-based batteries, which are entirely based on cellulose and polypyrrole and exhibit charge capacities between 25 and 33 mAh g-1 or 38-50 mAh g-1 per weight of the active material, open up new possibilities for the production of environmentally friendly, cost efficient, up-scalable and lightweight energy storage systems. There is currently a great interest in the development of thin, flexible, lightweight, and environmentally friendly batteries and supercapacitors.1 In this process, the preparation of novel redox polymer and electronically conducting polymer-base

Risk of COVID-19-related death among patients with chronic obstructive pulmonary disease or asthma prescribed inhaled corticosteroids: an observational cohort study using the OpenSAFELY platform

BACKGROUND: Early descriptions of patients admitted to hospital during the COVID-19 pandemic showed a lower prevalence of asthma and chronic obstructive pulmonary disease (COPD) than would be expected for an acute respiratory disease like COVID-19, leading to speculation that inhaled corticosteroids (ICSs) might protect against infection with severe acute respiratory syndrome coronavirus 2 or the development of serious sequelae. We assessed the association between ICS and COVID-19-related death among people with COPD or asthma using linked electronic health records (EHRs) in England, UK. METHODS: In this observational study, we analysed patient-level data for people with COPD or asthma from primary care EHRs linked with death data from the Office of National Statistics using the OpenSAFELY platform. The index date (start of follow-up) for both cohorts was March 1, 2020; follow-up lasted until May 6, 2020. For the COPD cohort, individuals were eligible if they were aged 35 years or older, had COPD, were a current or former smoker, and were prescribed an ICS or long-acting β agonist plus long-acting muscarinic antagonist (LABA-LAMA) as combination therapy within the 4 months before the index date. For the asthma cohort, individuals were eligible if they were aged 18 years or older, had been diagnosed with asthma within 3 years of the index date, and were prescribed an ICS or short-acting β agonist (SABA) only within the 4 months before the index date. We compared the outcome of COVID-19-related death between people prescribed an ICS and those prescribed alternative respiratory medications: ICSs versus LABA-LAMA for the COPD cohort, and low-dose or medium-dose and high-dose ICSs versus SABAs only in the asthma cohort. We used Cox regression models to estimate hazard ratios (HRs) and 95% CIs for the association between exposure categories and the outcome in each population, adjusted for age, sex, and all other prespecified covariates. We calculated e-values to quantify the effect of unmeasured confounding on our results. FINDINGS: We identified 148 557 people with COPD and 818 490 people with asthma who were given relevant respiratory medications in the 4 months before the index date. People with COPD who were prescribed ICSs were at increased risk of COVID-19-related death compared with those prescribed LABA-LAMA combinations (adjusted HR 1·39 [95% CI 1·10-1·76]). Compared with those prescribed SABAs only, people with asthma who were prescribed high-dose ICS were at an increased risk of death (1·55 [1·10-2·18]), whereas those given a low or medium dose were not (1·14 [0·85-1·54]). Sensitivity analyses showed that the apparent harmful association we observed could be explained by relatively small health differences between people prescribed ICS and those not prescribed ICS that were not recorded in the database (e value lower 95% CI 1·43). INTERPRETATION: Our results do not support a major role for regular ICS use in protecting against COVID-19-related death among people with asthma or COPD. Observed increased risks of COVID-19-related death can be plausibly explained by unmeasured confounding due to disease severity. FUNDING: UK Medical Research Council