Fabrication of high performance MgB2 wires by an internal Mg diffusion process

We succeeded in the fabrication of high-Jc MgB2/Fe wires applying the internal Mg diffusion (IMD) process with pure Mg core and SiC addition. A pure Mg rod with 2 mm diameter was placed at the center of a Fe tube, and the space between Mg and Fe tube was filled with B powder or the powder mixture of B-(5mol%)SiC. The composite was cold worked into 1.2mm diameter wire and finally heat treated at temperatures above the melting point of Mg(~650oC). During the heat treatment liquid Mg infiltrated into B layer and reacted with B to form MgB2. X-ray diffraction analysis indicated that the major phase in the reacted layer is MgB2. SEM analysis shows that the density of MgB2 layer is higher than that of usual powder-in-tube(PIT) processed wires. The wires with 5mol% SiC addition heat treated at 670oC showed Jc values higher than 105A/cm2 in 8T and 41,000A/cm2 in 10T at 4.2K. These values are much higher than those of usual PIT processed wires even compared to the ones with SiC addition. Higher density of MgB2 layer obtained by the diffusion reaction is the major cause of this excellent Jc values.Comment: 7page, 6figure

A Penetration Depth Study on Li2Pd3B and Li2Pt3B

In this paper we present a penetration depth study on the newly discovered superconductors Li$_2$Pd$_3$B and Li$_2$Pt$_3$B. Surprisingly, the low-temperature penetration depth $f(T)$ demonstrates distinct behavior in these two isostructural compounds. In Li$_2$Pd$_3$B, $f(T)$ follows an exponential decay and can be nicely fitted by a two-gap BCS superconducting model with a small gap $\delta_1=3.2$K and a large gap $\delta_2=11.5$K. However, linear temperature dependence of $f(T)$ is observed in Li$_2$Pt$_3$B below 0.3$T_c$, giving evidence of line nodes in the energy gap.Comment: 2 pages, submitted to LT2

Superconductivity in metal rich Li-Pd-B ternary Boride

8K superconductivity was observed in the metal rich Li-Pd-B ternary system. Structural, microstructural, electrical and magnetic investigations for various compositions proved that Li2Pd3B compound, which has a cubic structure composed of distorted Pd6B octahedrons, is responsible for the superconductivity. This is the first observation of superconductivity in metal rich ternary borides containing alkaline metal and Pd as a late transition metal. The compound prepared by arc melting has high density, is stable in the air and has an upper critical field, Hc2(0), of 6T.Comment: 4 pages, 5 figur

Discovery of Li2(Pd,Pt)3B superconductors

Critical temperature Tc of the Li2(Pd1-xPtx)3B was reported to be 7-8K for x=0 and 2.2-2.8K for x=1. In this article we present our preliminary results on behavior of magnetization-temperature curves with starting composition of Pd-B precursor, y-Li concentration in LiyPd3B and post-annealing of the Pd-end compound. Results suggest that to maximize Tc ratio Pd:B should be close to 3:1, while y-Li has to be optimum. The lowest Tc for LiyPd3B was 4.4-4.6K, while post-annealings at 560 deg. C allowed enhancement of Tc up to 8.2-8.4K. Compositions Li2Z3B with Z=Ni, Ru, Rh, Re, Ag are not superconducting down to 1.8K. Exception is composition with Re showing superconductivity due to Re3B compound. All samples were prepared by arc melting.Comment: 6 pages, 5 figs. presented at M2S, 200

Strain Effect in MgB2/Stainless Steel Superconducting Tape

The influence of mechanical strain on the critical current (Ic) is investigated for MgB2/stainless steel (SUS316) superconducting tapes. The tapes are fabricated by using 'powder in tube' method and deformation process without any heat treatment. The tensile axial strain along tape length is successfully induced to the sample by using a U-shape holder made of stainless steel (SUS304). Two samples are examined at 4.2 K in 5 T (B is applied perpendicular to the tape surface). While the initial Ic at zero external strain state (Ic0) varies (30.4 and 33.3 A), normalized Ic (Ic/Ic0) vs. external strain relations fall on the same curve. Linear increase of Ic is observed from zero external strain state to 0.5% strain (107% of Ic0). Rapid and large degradation occurs at the strain exceeding 0.4-0.5%. High durability against stress can be expected for MgB2/stainless steel superconducting tapes.Comment: 3 pages including 2 figures, submitted to Physica

Landau and Ott scaling for the kinetic energy density and the low TcT_c conventional superconductors, Li2Pd3BLi_{2}Pd_{3}B and Nb

The scaling approach recently proposed by Landau and Ott for isothermal magnetization curves is extended to the average kinetic energy density of the condensate. Two low $T_c$ superconductors, Nb and $Li_{2}Pd_{3}B$ are studied and their isothermal reversible magnetization shown to display Landau and Ott scaling. Good agreement is obtained for the upper critical field $H_{c2}(T)$, determined from the Abrikosov approximation for the reversible region (standard linear extrapolation of the magnetization curve), and from the maximum of the kinetic energy curves. For the full range of data, which includes the irreversible region, the isothermal $d.M.B/H^2$ curves for $Li_2Pd_3B$ show an impressive collapse into a single curve over the entire range of field measurements. The Nb isothermal $d.M.B/H^2$ curves exhibit the interesting feature of a constant and temperature independent minimum value

High transport critical current density obtained for Powder-In-Tube-processed MgB2 tapes and wires using stainless steel and Cu-Ni tubes

MgB2 tapes and wires were fabricated by the Powder-In-Tube method. Stainless steel and Cu-Ni tubes were used as sheath materials, and no heat treatment was applied. The tapes made of stainless steel showed transport critical current density Jc of about 10,000A/cm2 at 4.2K and 5T. A high Jc of about 300,000A/cm2 was obtained by extrapolating the Jc-B curves to zero field. Multifilamentary(7-core) MgB2 wire was successfully fabricated using Cu-Ni tubes. For both tapes and wires the grain connectivity of MgB2 was as good as a high-pressure sintered bulk sample. However, the Jc of the Cu-Ni sheathed wire was lower than the stainless steel sheathed tape due to the lower packing density of MgB2.Comment: 4 pages, 3 figure

Superconducting Properties of MgB2 Bulk Materials Prepared by High Pressure Sintering

High-density bulk materials of a newly discovered 40K intermetallic MgB2 superconductor were prepared by high pressure sintering. Superconducting transition with the onset temperature of 39K was confirmed by both magnetic and resistive measurements. Magnetization versus field (M-H) curve shows the behavior of a typical Type II superconductor and the lower critical field Hc1(0) estimated from M-H curve is 0.032T. The bulk sample shows good connection between grains and critical current density Jc estimated from the magnetization hysteresis using sample size was 2x104A/cm2 at 20K and 1T. Upper critical field Hc2(0) determined by extrapolating the onset of resistive transition and assuming a dirty limit is 18T.Comment: 3Pages PD

Muon-spin-rotation measurements of the penetration depth in Li_2Pd_3B

Measurements of the magnetic field penetration depth $\lambda$ in the ternary boride superconductor Li$_2$Pd$_3$B ($T_c\simeq7.3$ K) have been carried out by means of muon-spin rotation ($\mu$SR). The absolute values of $\lambda$, the Ginzburg-Landau parameter $\kappa$, and the first $H_{c1}$ and the second $H_{c2}$ critical fields at T=0 obtained from $\mu$SR were found to be $\lambda(0)=252(2)$ nm, $\kappa(0)=27(1)$, $\mu_0H_{c1}(0)=9.5(1)$ mT, and $\mu_0H_{c2}(0)=3.66(8)$ T, respectively. The zero-temperature value of the superconducting gap $\Delta_0=$1.31(3) meV was found, corresponding to the ratio $2\Delta_0/k_BT_c=4.0(1)$. At low temperatures $\lambda(T)$ saturates and becomes constant below $T\simeq 0.2T_c$, in agreement with what is expected for s-wave BCS superconductors. Our results suggest that Li$_2$Pd$_3$B is a s-wave BCS superconductor with the only one isotropic energy gap.Comment: 6 pages, 7 figure