Elliptic supersonic jet morphology manipulation using sharp-tipped lobes

Elliptic nozzle geometry is attractive for mixing enhancement of supersonic jets. However, jet dynamics, such as flapping, gives rise to high-intensity tonal sound. We experimentally manipulate the supersonic elliptic jet morphology by using two sharp-tipped lobes. The lobes are placed on either end of the minor axis in an elliptic nozzle. The design Mach number and the aspect ratio of the elliptic nozzle and the lobed nozzle are 2.0 and 1.65. The supersonic jet is exhausted into ambient at almost perfectly expanded conditions. Time-resolved schlieren imaging, longitudinal and cross-sectional planar laser Mie-scattering imaging, planar Particle Image Velocimetry, and near-field microphone measurements are performed to assess the fluidic behavior of the two nozzles. Dynamic Mode and Proper Orthogonal Decomposition (DMD and POD) analysis are carried out on the schlieren and the Mie-scattering images. Mixing characteristics are extracted from the Mie-scattering images through the image processing routines. The flapping elliptic jet consists of two dominant DMD modes, while the lobed nozzle has only one dominant mode, and the flapping is suppressed. Microphone measurements show the associated noise reduction. The jet column bifurcates in the lobed nozzle enabling a larger surface contact area with the ambient fluid and higher mixing rates in the near-field of the nozzle exit. The jet width growth rate of the two-lobed nozzle is about twice as that of the elliptic jet in the near-field, and there is a 40\% reduction in the potential core length. Particle Image Velocimetry (PIV) contours substantiate the results.Comment: 19 pages, 16 figures. Revised version submitted to Physics of Fluids for peer review. URL of the Video files (Fig. 6 & Fig. 14) are given in the text files (see in '/anc/*.txt'

Electrical and Magnetic behaviour of PrFeAsO0.8F0.2 superconductor

The superconducting and ground state samples of PrFeAsO0.8F0.2 and PrFeAsO have been synthesised via easy and versatile single step solid state reaction route. X-ray & Reitveld refine parameters of the synthesised samples are in good agreement to the earlier reported value of the structure. The ground state of the pristine compound (PrFeAsO) exhibited a metallic like step in resistivity below 150K followed by another step at 12K. The former is associated with the spin density wave (SDW) like ordering of Fe spins and later to the anomalous magnetic ordering for Pr moments. Both the resistivity anomalies are absent in case of superconducting PrFeAsO0.8F0.2 sample. Detailed high field (up to 12Tesla) electrical and magnetization measurements are carried out for superconducting PrFeAsO0.8F0.2 sample. The PrFeAsO0.8F0.2 exhibited superconducting onset (Tconset) at around 47K with Tc({\rho} =0) at 38K. Though the Tconset remains nearly invariant, the Tc({\rho} =0) is decreased with applied field, and the same is around 23K under applied field of 12Tesla. The upper critical field (Hc2) is estimated from the Ginzburg Landau equation (GL) fitting, which is found to be ~ 182Tesla. Critical current density (Jc) being calculated from high field isothermal magnetization (MH) loops with the help of Beans critical state model, is found to be of the order of 103 A/cm2. Summarily, the superconductivity characterization of single step synthesised PrFeAsO0.8F0.2 superconductor is presented.Comment: 15 Pages Text + Fig

Recovery of metal values from copper converter and smelter slags by ferric chloride leaching

A study of the recovery of copper, nickel and cobalt from copper converter and smelter slags by leaching with ferric chloride is reported. The converter slag from Ghatsila, India contained 4.03% copper, 1.99% nickel and 0.48% cobalt and the smelter slag contained 1.76% copper, 0.23% nickel and 0.19% cobalt. Various parameters including the effect of stirring, leaching time, leaching temperature, concentration of ferric chloride, solid-liquid ratio and particle size, on the extraction of copper, nickel and cobalt have been studied. 92% copper, 28% nickel and 24% cobalt could be extracted from converter slag under optimum conditions, whereas 54% copper, 71% nickel and 44% cobalt could be extracted from smelter slag

QoS Constrained Optimal Sink and Relay Placement in Planned Wireless Sensor Networks

We are given a set of sensors at given locations, a set of potential locations for placing base stations (BSs, or sinks), and another set of potential locations for placing wireless relay nodes. There is a cost for placing a BS and a cost for placing a relay. The problem we consider is to select a set of BS locations, a set of relay locations, and an association of sensor nodes with the selected BS locations, so that number of hops in the path from each sensor to its BS is bounded by hmax, and among all such feasible networks, the cost of the selected network is the minimum. The hop count bound suffices to ensure a certain probability of the data being delivered to the BS within a given maximum delay under a light traffic model. We observe that the problem is NP-Hard, and is hard to even approximate within a constant factor. For this problem, we propose a polynomial time approximation algorithm (SmartSelect) based on a relay placement algorithm proposed in our earlier work, along with a modification of the greedy algorithm for weighted set cover. We have analyzed the worst case approximation guarantee for this algorithm. We have also proposed a polynomial time heuristic to improve upon the solution provided by SmartSelect. Our numerical results demonstrate that the algorithms provide good quality solutions using very little computation time in various randomly generated network scenarios

Core-modified octaphyrins: syntheses and anion-binding properties

In this paper, a brief review of the syntheses, characterization and anion-binding properties of core-modified octaphyrins is presented. It has been shown that the core-modified octaphyrins exhibit aromaticity both in solution and in solid state, confirming the validity of the (4n + 2) Huckel rule for larger π-electron systems. Solid-state binding characteristics of TFA anions of two core-modified octaphyrins are also described

Assessing the Impacts of Climate Change on Crop Yields in Different Agro-climatic Zones of India

The study attempts to estimate and predict climate impact on crop yields using future temperature projections under two climate emissions scenarios of RCP 4.5 and 8.5 for three different time periods (2030s, 2050s and 2080s) across Agro-climatic zones (ACZ) of India. During the period 1966-2011, a significant rise was observed in both the annual mean maximum and minimum temperature across ACZs. Rainfall recorded an annual decline in Himalayan Regions and Gangetic Plains and a rise in Coastal Regions, Plateau & Hills and Western Dry Region. Our results showed high heterogeneity in climate impact on kharif and rabi crop yields (with both negative and positive estimates) across ACZs. It was found that rainfall had a positive effect on most of crop yields, but was not sufficient enough to counterbalance the impact of temperature. Changes in crop yield were more pronounced for higher emission scenario of RCP 8.5. Thus, it was evident that the relative impacts of climate change and the associated vulnerability vary by ACZs, hence comprehensive crop and region-specific adaptation measures should be emphasized that helps in enhancing resilience of agricultural system in short to medium term

Coexistence of para and ferromagnetic phases of Fe3+ in undoped CdZnTe (Zn r-v 4%) crystals

The signatures of the coexistence of para and ferromagnetic phases for the Fe3+ charge state of iron have been identified in the low temperature electron spin resonance (ESR) spectra in undoped CdZnTe (Zn ~ 4%) crystals and independently verified by superconducting quantum interference device (SQUID)and AC susceptibility measurements. In the paramagnetic phase the inverse of AC susceptibility follows the Curie-Weiss law. In the ferromagnetic phase the thermal evolution of magnetization follows the well-known Bloch T3/2 law. This is further supported by the appearance of hysteresis in the SQUID measurements at 2 Kbelow Tc which is expected to lie in between 2 and 2.5 K

Bingham Fluid Flow through a Tapered Tube with Permeable Wall

Bingham fluid flow through a tapered tube with permeable wall studied. The flow takes place due to pressure gradient, and the porous medium is homogeneous with permeability k. The flow surrounded by the porous medium is governed by the Bingham model, and the flow in the porous medium is governed by the Darcy’s law. The velocity distribution, the volume rate of flow and its fractional increase are obtained. The results are deduced and discussed through graphs

Transition of Care in Paediatric Surgery: Current practices and perspectives of paediatric surgeons in Malaysia

Objectives: Transition of care (TOC) from paediatric to adult care is still at an early stage in Malaysia. This study aimed to explore current practices and perspectives regarding TOC among paediatric surgeons in Malaysia. Methods: This study was carried out between June and December 2017. All 48 paediatric surgeons currently working in Malaysia were invited to participate in a questionnaire-based survey to assess demographic characteristics and practices and perspectives regarding TOC. Results: A total of 38 paediatric surgeons participated in the survey (response rate: 79.2%). Overall, 97.4% did not have an organised TOC model in their institution, with most (65.8%) caring for paediatric patients with complex surgical conditions until adulthood. Although the majority (86.8%) felt that care should be transitioned to adult surgeons with appropriate credentials, most surgeons (84.2%) nevertheless preferred to be involved in the management of adolescent patients after transition. However, there was no consensus regarding the most suitable age to begin the transition. Years of experience as a paediatric surgeon and place of practice did not affect overall TOC practice scores (P >0.050 each). The presence of adult comorbidities was considered the most common reason to initiate TOC (81.6%), while the lack of TOC guidelines was perceived to be the greatest barrier (84.2%). Conclusion: This study provides a better understanding of TOC from the point of view of paediatric surgeons in Malaysia. However, further studies involving other stakeholders (i.e. patients and adult surgeons) are needed to help formulate a suitable and successful TOC model in this setting.Keywords: Transition to Adult Care; Pediatrics; Adolescents; Surgery; Attitudes; Professional Practice; Malaysia