36 research outputs found

    Measurement of the diffractive structure function in deep inelastic scattering at HERA

    Full text link
    This paper presents an analysis of the inclusive properties of diffractive deep inelastic scattering events produced in epep interactions at HERA. The events are characterised by a rapidity gap between the outgoing proton system and the remaining hadronic system. Inclusive distributions are presented and compared with Monte Carlo models for diffractive processes. The data are consistent with models where the pomeron structure function has a hard and a soft contribution. The diffractive structure function is measured as a function of \xpom, the momentum fraction lost by the proton, of β\beta, the momentum fraction of the struck quark with respect to \xpom, and of Q2Q^2. The \xpom dependence is consistent with the form \xpoma where a = 1.30 ± 0.08 (stat)  0.14+ 0.08 (sys)a~=~1.30~\pm~0.08~(stat)~^{+~0.08}_{-~0.14}~(sys) in all bins of β\beta and Q2Q^2. In the measured Q2Q^2 range, the diffractive structure function approximately scales with Q2Q^2 at fixed β\beta. In an Ingelman-Schlein type model, where commonly used pomeron flux factor normalisations are assumed, it is found that the quarks within the pomeron do not saturate the momentum sum rule.Comment: 36 pages, latex, 11 figures appended as uuencoded fil

    The agt gene m235t polymorphism and response of power-related variables to aerobic training

    Get PDF
    © Journal of Sports Science and Medicine.The C allele of the M235T (rs699) polymorphism of the AGT gene correlates with higher levels of angiotensin II and has been associated with power and strength sport performance. The aim of the study was to investigate whether or not selected power-related variables and their response to a 12-week program of aerobic dance training are modulated by the AGT M235T genotype in healthy participants. Two hundred and one Polish Caucasian women aged 21 ± 1 years met the inclusion criteria and were included in the study. All women completed a 12-week program of low and high impact aerobics. Wingate peak power and total work capacity, 5 m, 10 m, and 30 m running times and jump height and jump power were determined before and after the training programme. All power-related variables improved significantly in response to aerobic dance training. We found a significant association between the M235T polymorphism and jump-based variables (squat jump (SJ) height, p = 0.005; SJ power, p = 0.015; countermovement jump height, p = 0.025; average of 10 countermovement jumps with arm swing (ACMJ) height, p = 0.001; ACMJ power, p = 0.035). Specifically, greater improvements were observed in the C allele carriers in comparison with TT homozygotes. In conclusion, aerobic dance, one of the most commonly practiced adult fitness activities in the world, provides sufficient training stimuli for augmenting the explosive strength necessary to increase vertical jump performance. The AGT gene M235T polymorphism seems to be not only a candidate gene variant for power/strength related pheno-types, but also a genetic marker for predicting response to training

    The effects of methane presorption on the variations of external diameters of hard coals during the sorption of carbon dioxide

    No full text
    W pracy przedstawiono badania mające na celu obserwację zachowania węgla kamiennego podczas gromadzenia w nim gazów kopalnianych i zmianę jego wymiarów zewnętrznych związaną z tym procesem. Podczas sorpcji gazów następuje zwiększenie wymiarów węgla, natomiast podczas desorpcji jego kontrakcja. Otrzymane wyniki badań wskazują, że węgiel bardziej rozszerza się w kierunku prostopadłym (ε﬩) do uławicenia niż w kierunku równoległym (ε//). Zarówno dla procesów sorpcyjnych, jak i dylatometrycznych osiągnięcie stanu równowagi następuje szybciej w układach węgiel–ditlenek węgla niż węgiel–metan. Mimo, że węgle kamienne w procesie sorpcji chłoną CO2 ponad dwukrotnie więcej ditlenku węgla niż metanu, ich deformacja sorpcyjna jest około trzy razy większa podczas sorpcji ditlenku węgla w porównaniu z metanem. Z przeprowadzonych badań wynika, że zatłoczenie ditlenku węgla do złoża metanowego, może być przyczyną, przy braku możliwości rozszerzania węgla w złożu, zwiększenia naprężeń w górotworze i w konsekwencji zmiany przepuszczalności złoża.Experiments were performed to investigate the hard coal behaviour while accumulating mine gases and the changes in its external dimensions that accompany this process. Sorption of mine gases brings about an increase of external dimensions of coal, and their desorption is accompanied by coal contraction. The results show that coal expansion is more pronounced in the direction perpendicular (ε﬩) to the bedding than parallel to it (ε //). The equilibrium condition both in sorption and expansion processes can be reached more quickly in the coal–CO2 than for coal–CH4 systems. In spite of the fact that coals tend to sorb CO2 much more effectively than CH4, their deformation ability due to sorption is three times greater during sorption of carbon dioxide than for methane. The tests reveal that injection of carbon dioxide to the coalbed containing methane may lead to increased stresses in the rock strata as the coal will not be able to expand any further and this will cause changes of the seam permeability

    Polish coals CO2 sequestration – the sorptic investigation analysis

    No full text
    Badania eksperymentalne sorpcji dwutlenku węgla przeprowadzono ze względu na aktualną problematykę sekwestracji tego gazu, między innymi w naturalnych rezerwuarach paliw kopalnych. Wykorzystano metodę objętościową w zakresie ciśnienia do 3 MPa, w temperaturze 298°K, na próbkach o frakcji ziarnowej. Z analizy uzyskanych izoterm sorpcji wynika, że największą chłonnością sorpcyjną charakteryzuje się węgiel pochodzący z kopalni Pniówek. Podstawowym celem pracy było określenie wpływu rodzaju węgla (zawartość % C, refleksyjność, porowatość oraz grupa macerałów) na wielkość chłonności sorpcyjnej względem CO2 dla próbek pochodzących z polskich kopalni węgla kamiennego. Uzyskane wyniki miały w założeniu posłużyć do stworzenia prostego modelu oddziaływań w układzie węgiel kamienny–gaz, który można by wziąć pod uwagę podczas oceny przydatności złoża do zatłoczenia w nim CO2.The experimental investigation of carbon dioxide sorption has been undertaken because of the gas sequestration (especially in fossil fuels) problematic. It was done on grained fraction samples with use of volumetric method under pressure up to 3 MPa and temperature 98 K. Isotherm analysis revealed Pniówek Mine coal sorption capacity as the highest. The main aim of the investigation was to show an influence of a coal (containance of % C, reflectance, porosity) and maceral groups in CO2 sorptic capacity for Polish mine-samples. Results have been seen to use as simple model for qualification coal bead in context of CO2 injection

    Economic and ecological effects of building waste management in the context of sustainable development

    No full text
    Scalenie techniki rachunku kosztów cyklu życia (LCC – Life Cycle Costing) i ekologicznej oceny cyklu życia (LCA – Life Cycle Assessment) umożliwia wyznaczenie wskaźników określających poziom oddziaływania ekonomicznego i ekologicznego całego cyklu lub wybranych etapów cyklu życia budynków mieszkalnych. W artykule przedstawiono procesy zagospodarowania odpadów czterech budynków mieszkalnych, różniących się od siebie technologią wykonania oraz spełnianym standardem energetycznym. Za główny cel badania wybrano powiązanie struktury materiałowej budynków, ilości powstających odpadów, oddziaływań środowiskowych generowanych przez powstające strumienie odpadów oraz kosztów i przychodów z tytułu ich końcowego zagospodarowania.Merging technology life cycle costing (LCC) and ecological of life cycle assessment (LCA) allows to determine the indicators of the level of economic and environmental impact of the whole cycle, or of selected stages of the life cycle residential buildings. The article presents the processes waste four residential buildings, differing technology performance and meet energy standard. The main objective of the study was chosen linking structure of materials of buildings, the amount of waste, the environmental impacts generated by the waste streams – standing up and the costs and revenues from their end of managing the

    Temperature-induced expansion of coal from Pniówek mine in coal-gas systems

    No full text
    Węgiel znajdujący się w złożu doznaje naprężeń wynikających z występowania naprężeń geostatycznych oraz zmian objętościowych, towarzyszących procesom sorpcji/desorpcji gazów. Zmiany wymiarów węgla będące następstwem procesów sorpcyjnych stanowią efekt wypadkowy kilku zjawisk, w tym: pęcznienia matrycy węglowej towarzyszącej sorpcji, kontrakcji węgla pod wpływem ciśnienia gazu wolnego w szczelinach i porach oraz przegrupowania elementów struktury węgla. Występujące w górotworze wahania temperatury mogą powodować zaburzenie równowagi sorpcyjnej gazów obecnych w złożu węgla (pochodzenia endogenicznego czy też wtłoczonego/zdeponowanego CO2). Naruszenie równowagi wywoływać będzie zmiany objętościowe masy węglowej, co powodować może zmiany stanu naprężenia górotworu i w konsekwencji prowadzić do niekontrolowanego rozszczelnienia magazynu gazu (w przypadku sekwestracji CO2) czy też wyrzutu skalno-gazowego w przypadku eksploatacji górniczej złoża. Stąd też analiza wpływu temperatury na zjawiska sorpcyjno-dylatometryczne będzie mieć istotne znaczenie. Istnieje mało doniesień literaturowych pokazujących jaki jest wpływ temperatury na zmiany objętościowe węgla kamiennego towarzyszące sorpcji gazów kopalnianych. W pracy przedstawiono wyniki pomiarów dylatometrycznych dla dwóch próbek węgla, pochodzących z różnych pokładów w kopalni „Pniówek”. Zostały zmierzone zmiany objętościowe układów węgiel- -CH4, węgiel-CO2 podczas zmiany temperatury układu. Stwierdzono odmienny charakter zachowania się układu w zależności od rodzaju użytego gazu. Uzyskane wyniki wskazują również, że głębokość zalegania oraz skład petrograficzny mają wpływ na zmiany objętościowe układu węgiel-gaz podczas zmian temperatury.Coal seams are imposed by effective stress emerging from vertical overburden pressure, horizontal lateral earth pressure and extensively from gas sorption/desorption-induced volumetric changes. The range of contingent dimension changes of coal resulting from sorption processes is a combined effect of several phenomena, including sorption-induced swelling of coal matrix, contraction of coal microporous regions caused by free gas pressure in pores and cleats and coal structural re-arrangement. Temperature fluctuations emerging in coalbeds may result in significant changes in sorption conditions followed by equilibrium disturbance for accumulated gases. The equilibrium disturbance can cause volumetric changes in coal mass that may be further transferred to stresses in rock strata and a repercussion can lead to an uncontrolled loss of gas reservoir sealing (in CO2 sequestration case) or sudden gas, rock and coal outburst in case of operating underground coal mines. Hence conducting analyses of the temperature influence on sorption and dilatometric phenomena will be of significance. Nonetheless, the influence of temperature variation on mine gases sorption-induced coal’s overall dimensions changes remains an unexplored research area. In this study the results of dilatometric tests performed on 2 hard coal samples obtained from different seams of Polish coal mine Pniówek are presented. Measurements of temperature-induced changes of coal samples overall dimensions and volume in coal-methane and coal-carbon dioxide systems were conducted. The influence of the type of gas on the nature of coal-gas system response to temperature change effect was acknowledged. The results also show that the depth of the coal seam and the petrographic composition of coal relate to character of volumetric changes of coal-gas system caused by temperature changes

    Sources of unpleasant odour inside vehicle : a case study

    No full text
    W artykule opisano procedurę badawczą pozwalającą na wskazanie i/lub potwierdzenie źródła nieprzyjemnego zapachu wewnątrz kabiny nowego samochodu. Do oceny jakości powietrza wewnętrznego wykorzystano metody sensoryczne i analityczne. Wstępną analizę zapachu panującego w samochodzie przeprowadzono przed rozpoczęciem pobierania próbek powietrza. Powietrze pobrane do pozbawionych zapachu worków po przetransportowaniu do laboratorium zostało poddane ocenie sensorycznej przez pięć wykwalifikowanych osób. Skład jakościowy i ilościowy próbek powietrza określono metodą wysokosprawnej chromatografii cieczowej (HPLC), chromatografii gazowej sprzężonej z desorpcją temperaturową i detektorami: spektrometrem mas oraz detektorem plomieniowo-jonizacyjnym (TD-GC/MS-FID) oraz chromatografii gazowej sprzężonej z detekcją olfaktometryczną (GC-O) i spektrometrem mas.Paper discussed analytical procedure allowing indication and/or proving the source of unpleasant odour inside the cabin of new vehicle. Interior air quality was determined by sensory and instrumental methods. Preliminary in-vehicle odour analysis was performed before air samples collection. Air samples collected in inert bags after transportation to laboratory were object of sensory evaluation of five qualified testers. Quantitative and qualitative composition of air samples were determined by high performance liquid chromatography (HPLC), gas chromatography coupled with thermal desorption and with mass detection and flame ionization detection (TD-GC/MS-FID) and by gas chromatography coupled with olfactometric detection (GC-O) and mass detection

    Prognosticating fire hazards in goafs in Polish collieries

    No full text
    The purpose of the study is to determine the sorption capacity of hard coals from Polish collieries with respect to several sorbets: ethane, ethylene, propane, propylene. The knowledge of the sorption capacity of coal with respect to a wide range of sorbates is essential to ensure the miners' safety and to allow for reliable forecasting fire hazard and self-heating of coal. The self-heating process is evaluated using specialist indicators based on hydrocarbon contents in mine air. Coal properties, such as porosity, coal rank, maceral content, moisture, ash and volatile matter contents as well as proportion of mineral substances are of key importance for understanding the processes taking place on the hard coal-gas interface. The quantitative analysis of these parameters supported by sorption tests will provide us information about the coal's structure's tendency to accumulate and release gases and vapours. It is important to determine the accessibility of the internal coal structure to gases and to investigate the influence of the micro- and submicro-porosity on the process of sorption. Concentrations of non-saturated hydrocarbons: ethylene and propylene are good indicators used to evaluate the scale of the self-heating process. Therefore, we need to reliably establish whether hydrocarbons present in mine air are released only through the self-heating process or whether they can be also accumulated in the coal structure and then desorbed when the conditions should change. Although preventive measures have been put place in Polish collieries, endogenous fire are still fairly frequent, so the hazard control based only on concentrations of non-saturated hydrocarbons may prove insufficient. It is also necessary to determine whether those hydrocarbons can be accumulated in coal, what factors will trigger this process and in what extent. Results of such tests will contribute to fire prevention and will help control other hazards associated with underground mining operations
    corecore