373 research outputs found
Gain functionalization of silica microresonators
Erbium-doped solgel films are applied to the surface of silica microspheres to create low-threshold microcavity lasers. This gain functionalization can be applied by use of a number of different dopants, thereby extending the wavelength range of this class of device. Also, by varying the doping concentration and thickness of the applied solgel layer, one can vary the laser dynamics so that both continuous-wave and pulsating modes of operation are possible
Ultralow Loss, High Q, Four Port Resonant Couplers for Quantum Optics and Photonics
We demonstrate a low-loss, optical four port resonant coupler (add-drop geometry), using ultrahigh Q (>108) toroidal microcavities. Different regimes of operation are investigated by variation of coupling between resonator and fiber taper waveguides. As a result, waveguide-to-waveguide power transfer efficiency of 93% (0.3 dB loss) and nonresonant insertion loss of 0.02% (<0.001 dB) for narrow bandwidth (57 MHz) four port couplers are achieved in this work. The combination of low-loss, fiber compatibility, and wafer-scale design would be suitable for a variety of applications ranging from quantum optics to photonic networks
Soft lithographic fabrication of microresonators
Using ultra-high-Q toroid microcavity masters, soft lithography is applied to fabricate polymer microcavity arrays with Q factors in excess of 10^6. This technique produces resonators with material-limited quality factors
Fiber-coupled erbium microlasers on a chip
An erbium-doped, toroid-shaped microlaser fabricated on a silicon chip is described and characterized. Erbium-doped sol-gel films are applied to the surface of a silica toroidal microresonator to create the microcavity lasers. Highly confined whispering gallery modes make possible single-mode and ultralow threshold microlasers
Scanning probe microscopy of thermally excited mechanical modes of an optical microcavity
The resonant buildup of light within optical microcavities elevates the
radiation pressure which mediates coupling of optical modes to the mechanical
modes of a microcavity. Above a certain threshold pump power, regenerative
mechanical oscillation occurs causing oscillation of certain mechanical
eigenmodes. Here, we present a methodology to spatially image the
micro-mechanical resonances of a toroid microcavity using a scanning probe
technique. The method relies on recording the induced frequency shift of the
mechanical eigenmode when in contact with a scanning probe tip. The method is
passive in nature and achieves a sensitivity sufficient to spatially resolve
the vibrational mode pattern associated with the thermally agitated
displacement at room temperature. The recorded mechanical mode patterns are in
good qualitative agreement with the theoretical strain fields as obtained by
finite element simulations
Quantum-well capture and interwell transport in semiconductor active layers
The dynamics of electrons and holes in multiquantum-well semiconductor gain media involves several different transport processes, such as diffusion and drift across the barrier region, as well as capture and escape transitions between the bound and the unbound states of the quantum wells. In addition to their fundamental interest, these processes are important because of their implications for the dynamic properties of multiquantum-well lasers and optical amplifiers. Experimentally, they have been studied with several time-domain optical techniques having (sub)picosecond resolution and, more recently, with frequency-domain techniques based on laser modulation measurements. This article gives a brief review of the work done in this area and then presents in detail a frequency-domain approach, four-wave mixing spectroscopy in semiconductor optical amplifiers, to investigate intrinsic capture and interwell equilibration. This technique allows one to extend the device modulation frequency to several hundreds of gigahertz, thus providing the required time resolution, and can be configured to isolate and directly study the transport process of interest
Modal coupling in traveling-wave resonators
High-Q traveling-wave-resonators can enter a regime in which even minute scattering amplitudes associated with either bulk or surface imperfections can drive the system into the so-called strong modal coupling regime. Resonators that enter this regime have their coupling properties radically altered and can mimic a narrowband reflector. We experimentally confirm recently predicted deviations from criticality in such strongly coupled systems. Observations of resonators that had Q>10^8 and modal coupling parameters as large as 30 were shown to reflect more than 94% of an incoming optical signal within a narrow bandwidth of 40 MHz
Theoretical and experimental study of radiation pressure-induced mechanical oscillations (parametric instability) in optical microcavities
Radiation pressure can couple the mechanical modes of an optical cavity structure to its optical modes, leading to parametric oscillation instability. This regime is characterized by regenerative oscillation of the mechanical cavity eigenmodes. Here, we present the first observation of this effect with a detailed theoretical and experimental analysis of these oscillations in ultra-high-Q microtoroids. Embodied within a microscale, chip-based device, this mechanism can benefit both research into macroscale quantum mechanical phenomena and improve the understanding of the mechanism within the context of laser interferometer gravitational-wave observatory (LIGO). It also suggests that new technologies are possible that will leverage the phenomenon within photonics
Fabrication and coupling to planar high-Q silica disk microcavities
Using standard lithographic techniques, we demonstrate fabrication of silica disk microcavities, which exhibit whispering-gallery-type modes having quality factors (Q) in excess of 1 million. Efficient coupling (high extinction at critical coupling and low, nonresonant insertion loss) to and from the disk structure is achieved by the use of tapered optical fibers. The observed high Q is attributed to the wedged-shaped edge of the disk microcavity, which is believed to isolate modes from the disk perimeter and thereby reduce scattering loss. The mode spectrum is measured and the influence of planar confinement on the mode structure is investigated. We analyze the use of these resonators for very low loss devices, such as add/drop filters
Ultralow-threshold microcavity Raman laser on a microelectronic chip
Using ultrahigh-Q toroid microcavities on a chip, we demonstrate a monolithic microcavity Raman laser. Cavity photon lifetimes in excess of 100 ns combined with mode volumes typically of less than 1000 µm^3 significantly reduce the threshold for stimulated Raman scattering. In conjunction with the high ideality of a tapered optical fiber coupling junction, stimulated Raman lasing is observed at an ultralow threshold (as low as 74 µW of fiber-launched power at 1550 nm) with high efficiency (up to 45% at the critical coupling point) in good agreement with theoretical modeling. Equally important, the wafer-scale nature of these devices should permit integration with other photonic, mechanical, or electrical functionality on a chip
- …