Performance analysis of electrical circuits /PANE/

Automated statistical and worst case computer program has been designed to perform dc and ac steady circuit analyses. The program determines the worst case circuit performance by solving circuit equations

A Universal Criterion for Plastic Yielding of Metallic Glasses with a (T/Tg)2/3 Temperature Dependence

Room temperature (TR) elastic constants and compressive yield strengths of ~30 metallic glasses reveal an average shear limit gammaC=0.0267±0.0020, where tauY=gammaCG is the maximum resolved shear stress at yielding, and G the shear modulus. The gammaC values for individual glasses are correlated with t=TR/Tg, and gammaC for a single glass follows the same correlation (vs t=T/Tg). A cooperative shear model, inspired by Frenkel's analysis of the shear strength of solids, is proposed. Using a scaling analysis leads to a universal law tauCT/G=gammaC0-gammaC1(t)2/3 for the flow stress at finite T where gammaC0=(0.036±0.002) and gammaC1=(0.016±0.002)

Microsatellite Analysis of Trophy Largemouth Bass from Arkansas Reservoirs

The Arkansas Game and Fish Commission (AGFC) has introduced Florida largemouth bass (FLMB; Micropterus salmoides floridanus) to water bodies historically containing the northern largemouth bass (NLMB; Micropterus salmoides salmoides) subspecies since the late 1970s in an attempt to produce a trophy LMB fishery. Since 2006, the AGFC has been biannually sampling reservoirs stocked with FLMB to determine levels of admixture. Here, total sampling efforts between 2006 and 2011 have been combined, and LMB heavier than 2,268 g (5 lb) were analyzed in an effort to investigate distribution of bass by their genetic composition designated as trophy LMB by the AGFC. Of the 148 trophy LMB sampled, 123 possessed FLMB alleles (83.1%). Thirty-two of the heaviest 50 (64.0%) LMB sampled, including a potential state record that was nullified, were genetically confirmed to be FLMB. Distributions of trophy bass within reservoirs were preferentially represented by Fx-FLMB and FLMB

Hydrogen transport in alpha titanium

Permeation experiments after nitriding the inlet surface of a hollow cylindrical membrane were conducted. Permeation data on two additional specimens given pre-oxidation or pre-nitriding treatments at both inlet and outlet surfaces are presented in terms of Arrhenius plots. Additionally, an analysis of geometry dependence on permeation rate was made for several specimens including the ones mentioned above. For simplicity in this report, the term as-polished is used to refer to a specimen which is either as-polished or is as-polished, pre-oxidized and annealed

A magnetically focused image tube employing an opaque photocathode

Image converter has been developed which uses opaque photocathode for improved efficiency. Device is easier to fabricate than previous semi-transparent photocathode converters and uses compounds from Groups 3-5 that are responsive to wave-lengths between ultraviolet (approximately 100 nm) and near infrared region (approximately 1000 nm)

Image tube

An optical image is projected onto a planar surface of a photocathode that derives an electron beam replica of the image. A target electrode displaced relative to the photocathode so that it does not obstruct the optical image includes a planar surface for receiving and deriving an accurate replica of the electron beam image. The two planar surfaces are parallel. The electron beam image is focused on the target electrode by providing throughout a region that extends between the planar surfaces of the photocathode and receiving electrode, constant homogeneous dc electric and magnetic fields. The electric field extends in a direction perpendicular to the planar surfaces while the magnetic field extends along a straight line that intersects the photocathode and target electrode at an acute angle

Change of Compressiblity at the Glass Transition and Prigogine-Defay Ratio in ZrTiCuNiBe Alloys

The change of the compressibility at the glass transition Tg is evaluated from pressure experiments in the liquid and the glassy state of the ZrTiCuNiBe bulk metallic glass forming system. Via the enthalpy recovery method, we derive an increase of Tg with pressure of 3.6 K/GPa. Comparing the changes of the compressibility, the specific heat capacity, and the thermal expansion coefficient at Tg, we estimate for the first time a Prigogine-Defay ratio in metallic systems. This ratio is about 2.4 for the present alloy and compares well with known nonmetallic glass forming systems

Gas phase hydrogen permeation in alpha titanium and carbon steels

Commercially pure titanium and heats of Armco ingot iron and steels containing from 0.008-1.23 w/oC were annealed or normalized and machined into hollow cylinders. Coefficients of diffusion for alpha-Ti and alpha-Fe were determined by the lag-time technique. Steady state permeation experiments yield first power pressure dependence for alpha-Ti and Sievert's law square root dependence for Armco iron and carbon steels. As in the case of diffusion, permeation data confirm that alpha-titanium is subject to at least partial phase boundary reaction control while the steels are purely diffusion controlled. The permeation rate in steels also decreases as the carbon content increases. As a consequence of Sievert's law, the computed hydrogen solubility decreases as the carbon content increases. This decreases in explained in terms of hydrogen trapping at carbide interfaces. Oxidizing and nitriding the surfaces of alpha-titanium membranes result in a decrease in the permeation rate for such treatment on the gas inlet surfaces but resulted in a slight increase in the rate for such treatment on the gas outlet surfaces. This is explained in terms of a discontinuous TiH2 layer

Reliability evaluation of hermetic dual in-line flat microcircuit packages

The relative strengths and weaknesses of 35 commonly used hermetic flat and dual in-line packages were determined and used to rank each of the packages according to a numerical weighting scheme for package attributes. The list of attributes included desirable features in five major areas: lead and lead seal, body construction, body materials, lid and lid seal, and marking. The metal flat pack and multilayer integral ceramic flat pack and DIP received the highest rankings, and the soft glass Cerdip and Cerpak types received the lowest rankings. Loss of package hermeticity due to lead and lid seal problems was found to be the predominant failure mode from the literature/data search. However, environmental test results showed that lead and lid seal failures due to thermal stressing was only a problem with the hard glass (Ceramic) body DIP utilizing a metal lid and/or bottom. Insufficient failure data were generated for the other package types tested to correlate test results with the package ranking