High Poverty Schools and the Distribution of Teachers and Principals

Although many factors combine to make a successful school, most people agree that quality teachers and school principals are among the most important requirements for success, especially when success is defined by the ability of the school to raise the achievement of its students. The central question for this study is how the quality of the teachers and principals in high-poverty schools in North Carolina compares to that in the schools serving more advantaged students. A related question is why these differences emerge. The consistency of the patterns across many measures of qualifications for both teachers and principals leaves no doubt that students in the high-poverty schools are served by school personnel with lower qualifications than those in the lower poverty schools. Moreover, in many cases the differences are large. Additional evidence documents that the differences largely reflect predictable outcomes of the labor market for teachers and principals. Hence, active policy interventions are needed to counter these forces if the ultimate goal is to provide equal educational opportunity

Real-time kinetics and high-resolution melt curves in single-molecule digital LAMP to differentiate and study specific and non-specific amplification

Isothermal amplification assays, such as loop-mediated isothermal amplification (LAMP), show great utility for the development of rapid diagnostics for infectious diseases because they have high sensitivity, pathogen-specificity and potential for implementation at the point of care. However, elimination of non-specific amplification remains a key challenge for the optimization of LAMP assays. Here, using chlamydia DNA as a clinically relevant target and high-throughput sequencing as an analytical tool, we investigate a potential mechanism of non-specific amplification. We then develop a real-time digital LAMP (dLAMP) with high-resolution melting temperature (HRM) analysis and use this single-molecule approach to analyze approximately 1.2 million amplification events. We show that single-molecule HRM provides insight into specific and non-specific amplification in LAMP that are difficult to deduce from bulk measurements. We use real-time dLAMP with HRM to evaluate differences between polymerase enzymes, the impact of assay parameters (e.g. time, rate or florescence intensity), and the effect background human DNA. By differentiating true and false positives, HRM enables determination of the optimal assay and analysis parameters that leads to the lowest limit of detection (LOD) in a digital isothermal amplification assay

An Innovative Take on Filtering Carbon Dioxide Through CryoCapture

Overview (Air Mover): Carbon dioxide plays an important role in the earth's ecosystem; the lives of many organisms are based on the balancing of this gas. Plants and animals need it for survival however, an excess of carbon dioxide can also end the organism’s life. The production of the gas mostly comes from the combustion of fossil fuel, power plants, big industries, vehicles, and processes involving natural gasses. One of the most known issues of carbon dioxide pollution is global warming. The greenhouse gas essentially traps heat in the atmosphere, increasing the global temperature. The methodology provided is an innovative solution towards the creation of an environmentally friendly carbon dioxide filter. Current air filtration systems are restricted to industrial environments limiting the ability to filter the air. Due to the large noise and low range of operation of axial fans the filtration systems need controlled environments for longevity. The paper presents a versatile air mover that can be mounted onto multiple surfaces due to its low profile and bracket mounts. Furthermore, the usage of a diagonal fan inside of a PVC pipe allows for a durable system that can operate at high efficiency and low noise. The main challenge in designing the air mover was figuring out how to quantify the scalability of the device and what parameters could be changed in order to make the device more viable. The designs most prominent feature are the inclusion of a modular enclosure that can be adapted to multiple areas and environments while withstanding harsh conditions due to the PVC piping that can be coated with a diagonal fan for high volumetric flow rates and pressure differential for versatility in environments the device is placed in as well as efficiency. Overview (Carbon Storer): The Civil and Environmental Engineering team is responsible for finding a cost effective and sustainable way to transport, store and recycle the carbon caught in the air from the Carbon Catcher designed by the other engineering teams. In the team’s design, the Carbon Catcher will reduce the harmful emissions in the air by capturing CO2, store it and then utilize it in another industry which will reduce the need to mine for more raw materials which would thus further reduce the pollution emitted into the environment. Our plan is to recycle the carbon emitted from a factory and utilize it in CO2 dry ice. It's the Civil and Environmental Engineers’ job to find a way to connect a sustainable solution with a solution that improves the public’s quality of life. There are many industries that pollute immense amounts from the mining of raw material or the emission of pollutants. The team wants to show industries that the economic solution can also be the sustainable solution. Overview (Membrane) The team’s solution focuses on the use of cryogenic carbon capture, a method in which the selective freezing points of the gaseous components of air are used to separate out carbon dioxide. For this process, the team will be utilizing a 4 step filtration process. First, the flue gas will be run through a particulate filter to catch all macroscopic particles that may be present within the air. Afterwards, the gas is then passed through a dehumidifier where a majority of water content will be extracted. Following this, The gas was then run through a long pipe and progressively cool it down to the freezing point of carbon dioxide. Finally, the filtered gas is extracted, and a bubbler is used to separate the solid carbon dioxide. The carbon dioxide is then compressed and recycled around the feed pipe to help in the cooling process. Along the process of this design, the team encountered problems finding the optimum materials for temperatures this low. As well, coming up with a way to eliminate heat transfer from the outside posed a huge problem. Through the experience, the team was able to gain a greater view of what benefits and drawbacks must be balanced, along with the economic interest that comes with designing an efficient process. Unlike how most designs are focused, It was understood that using a membrane only provided so much creativity when it came to filtration. As a result, the team researched other successful methods and arrived at utilizing cryogenics to filter. Goal Research to provide a single solution to remove levels of carbon dioxide in the immediate atmosphere, transport it to a storage mechanism, and find a way to recycle it. Powerful research is required to ensure effective methodologies, material usage, and flexible scalability of the overall device. This particular team seeks to find an alternative separation process to membrane filtration, the efficacy of which has not been demonstrated beyond the scale of a laboratory

Excitatory drive to spinal motoneurones is necessary for serotonin to modulate motoneurone excitability via 5-HT2 receptors in humans

Serotonin modulates corticospinal excitability, motoneurone firing rates and contractile strength via 5-HT2 receptors. However, the effects of these receptors on cortical and motoneurone excitability during voluntary contractions have not been explored in humans. Therefore, the purpose of this study was to investigate how 5-HT2 antagonism affects corticospinal and motoneuronal excitability with and without descending drive to motoneurones. Twelve individuals (aged 24 ± 4 years) participated in a double-blind, placebo-controlled, crossover study, whereby the 5-HT2 antagonist cyproheptadine was administered. Transcranial magnetic stimulation (TMS) was delivered to the motor cortex to produce motor evoked potentials (MEPs), and electrical stimulation at the cervicomedullary junction was used to generate cervicomedullary motor evoked potentials (CMEPs) in the biceps brachii at rest and during a range of submaximal elbow flexions. Evoked potentials were also obtained after a conditioning TMS pulse to produce conditioned MEPs and CMEPs (100 ms inter-stimulus interval). 5-HT2 antagonism reduced maximal torque (p \u3c 0.001), and compared to placebo, reduced unconditioned MEP amplitude at rest (p = 0.003), conditioned MEP amplitude at rest (p = 0.033) and conditioned MEP amplitude during contractions (p = 0.020). 5-HT2 antagonism also increased unconditioned CMEP amplitude during voluntary contractions (p = 0.041) but not at rest. Although 5-HT2 antagonism increased long-interval intracortical inhibition, net corticospinal excitability was unaffected during voluntary contractions. Given that spinal motoneurone excitability was only affected when descending drive to motoneurones was present, the current study indicates that excitatory drive is necessary for 5-HT2 receptors to regulate motoneurone excitability but not intracortical circuits

Wavelength selection and symmetry breaking in orbital wave ripples

Sand ripples formed by waves have a uniform wavelength while at equilibrium and develop defects while adjusting to changes in the flow. These patterns arise from the interaction of the flow with the bed topography, but the specific mechanisms have not been fully explained. We use numerical flow models and laboratory wave tank experiments to explore the origins of these patterns. The wavelength of “orbital” wave ripples (λ) is directly proportional to the oscillating flow's orbital diameter (d), with many experimental and field studies finding λ/d ≈ 0.65. We demonstrate a coupling that selects this ratio: the maximum length of the flow separation zone downstream of a ripple crest equals λ when λ/d ≈ 0.65. We show that this condition maximizes the growth rate of ripples. Ripples adjusting to changed flow conditions develop defects that break the bed's symmetry. When d is shortened sufficiently, two new incipient crests appear in every trough, but only one grows into a full-sized crest. Experiments have shown that the same side (right or left) wins in every trough. We find that this occurs because incipient secondary crests slow the flow and encourage the growth of crests on the next flank. Experiments have also shown that when d is lengthened, ripple crests become increasingly sinuous and eventually break up. We find that this occurs because crests migrate preferentially toward the nearest adjacent crest, amplifying any initial sinuosity. Our results reveal the mechanisms that form common wave ripple patterns and highlight interactions among unsteady flows, sediment transport, and bed topography.National Science Foundation (U.S.) (Award EAR-1225865)National Science Foundation (U.S.) (Award EAR-1225879

SPACA9 is a lumenal protein of human ciliary singlet and doublet microtubules

The cilium-centrosome complex contains triplet, doublet, and singlet microtubules. The lumenal surfaces of each microtubule within this diverse array are decorated by microtubule inner proteins (MIPs). Here, we used single-particle cryo-electron microscopy methods to build atomic models of two types of human ciliary microtubule: the doublet microtubules of multiciliated respiratory cells and the distal singlet microtubules of monoflagellated human spermatozoa. We discover that SPACA9 is a polyspecific MIP capable of binding both microtubule types. SPACA9 forms intralumenal striations in the B tubule of respiratory doublet microtubules and noncontinuous spirals in sperm singlet microtubules. By acquiring new and reanalyzing previous cryo-electron tomography data, we show that SPACA9-like intralumenal striations are common features of different microtubule types in animal cilia. Our structures provide detailed references to help rationalize ciliopathy-causing mutations and position cryo-EM as a tool for the analysis of samples obtained directly from ciliopathy patients

Vitamin E - phosphatidylethanolamine interactions in mixed membranes with sphingomyelin: Studies by 2H NMR

Among the structurally diverse collection of lipids that comprise the membrane lipidome, polyunsaturated phospholipids are particularly vulnerable to oxidation. The role of α-tocopherol (vitamin E) is to protect this influential class of membrane phospholipid from oxidative damage. Whether lipid-lipid interactions play a role in supporting this function is an unanswered question. Here, we compare the molecular organization of polyunsaturated 1-[2H31]palmitoyl-2-docosahexaenoylphosphatidylethanolamine (PDPE-d31) and, as a control, monounsaturated 1-[2H31]palmitoyl-2-oleoylphosphatidylethanolamine (POPE-d31) mixed with sphingomyelin (SM) and α-tocopherol (α-toc) (2:2:1 mol) by solid-state 2H NMR spectroscopy. In both cases the effect of α-toc appears similar. Spectral moments reveal that the main chain melting transition of POPE-d31 and PDPE-d31 is broadened beyond detection. A spectral component attributed to the formation of inverted hexagonal HII phase in coexistence with lamellar Lα phase by POPE-d31 (20 %) and PDPE-d31 (18 %) is resolved following the addition of α-toc. Order parameters in the remaining Lα phase are increased slightly more for POPE-d31 (7%) than PDPE-d31 (4%). Preferential interaction with polyunsaturated phospholipid is not apparent in these results. The propensity for α-toc to form phase structure with negative curvature that is more tightly packed at the membrane surface, nevertheless, may restrict the contact of free radicals with lipid chains on phosphatidylethanolamine molecules that accumulate polyunsaturated fatty acids

The Archaeology and Remote Sensing of Santa Elena’s Four Millennia of Occupation

In this study, we present the results of a comprehensive, landscape-scale remote sensing project at Santa Elena on Parris Island, South Carolina. Substantial occupation at the site extends for over 4000 years and has resulted in a complex array of features dating to different time periods. In addition, there is a 40-year history of archaeological research at the site that includes a large-scale systematic shovel test survey, large block excavations, and scattered test units. Also, modern use of the site included significant alterations to the subsurface deposits. Our goals for this present work are threefold: (1) to explicitly present a logical approach to examine sites with long-term occupations; (2) to examine changes in land use at Santa Elena and its implications for human occupation of this persistent place; and (3) to use the remote sensing program and past archaeological research to make substantive suggestions regarding future research, conservation, and management of the site. Our research provides important insight into the distribution of cultural features at this National Historic Landmark. While the majority of archaeological research at the site has focused on the Spanish period, our work suggests a complex and vast array of archaeological features that can provide insight into over 4000 years of history in the region. At a gross level, we have identified possible Late Archaic structures, Woodland houses and features, Late Prehistoric and early Historic council houses, and a suite of features related to the Spanish occupation which builds on our previous research at the site. In addition to documenting possible cultural features at the site, our work illustrates the value of multiple remote sensing techniques used in conjunction with close-interval shovel test data