Wettability of Binary Solid-Supported Films of Zwitterionic/Anionic Phospholipids

The effect of different amounts of anionic phosphatidylglycerol in the zwitterionic phosphatidylcholine monolayers on their properties was quantitatively described in terms of the interactions between these two compounds as well as the changes of mixed monolayers' apparent surface free energy and its components. For all Langmuir films, surface pressure–area per molecule (π–A) isotherms were used to monitor the surface thermodynamics (i.e. the excess area and excess free enthalpy of mixing). This allowed to evaluate the kind and magnitude of interactions that have an influence on the phase behaviour and structural properties of the monolayers. Then, assuming that the molecular properties of Langmuir films are preserved upon transfer to a solid support, further characterizations were accomplished with advancing and receding contact angle measurements on the Langmuir–Blodgett films deposited at 35 mN/m on mica. These enabled the possibility to track changes in the wettability of the tightly packed or phase-separated phospholipid films and their surface free energy as a function of the monolayer composition. It is believed that these results throw a light on better understanding of the organizational structure of lipid films and their interactions with the surrounding environment. Moreover, the obtained results can be also helpful to identify the optimal lipid composition in the production of more effective therapeutic surfactants

Effect of Lauryl Gallate on Wetting Properties of Organized Thin Phospholipid Films on Mica

To characterize surfaces of phospholipid/lauryl gallate monolayers deposited on mica there were applied numerous methods such as measurements of advancing and receding contact angles and optical profilometry, as well as atomic force microscopy. As a result, there was no found correlation between contact angles (and their hysteresis) or surface roughness. Hence, most monolayer topographical changes at the Ångstrom level accompanied changes in surface chemistry which resulted in the hysteresis of contact angle on thin films. The obtained results indicate that stability and permeability of the binary films are determined by the composition and stoichiometry of the mixed monolayers. These results can be helpful for insight into lauryl gallate behavior in living systems, i.e., in membrane antioxidant protection and pharmacological activities

Wettability of hybrid chitosan/phospholipid coatings

Solution spreading and Langmuir-Blodgett/Schaefer techniques were used for preparation of chitosan/phospholipid (DPPC) films on air plasma treated polyethylene terephthalate (PET) plates. The surface wetting properties were determined based on the measurements of the advancing and receding contact angles of water, formamide and diiodomethane. The contact angle hysteresis model of Chibowski was applied to estimate the total surface free energy values. The coatings properties were found to be affected by molecular organisation and packing depending on the preparation technique. Phospholipid molecules modified the chitosan film surface by changing the kind and magnitude of interactions, which is revealed in the values of surface free energy. These findings may be helpful for the development of new generation polymer-supported biocompatible coatings with anti-thrombogenic and anti-bactericidal properties, thus expanding the spectrum of chitosan applications

Effect of chitosan, hyaluronic acid and/or titanium dioxide on the physicochemical characteristic of phospholipid film/glass surface

The production of preparations, whose destination action takes place in close proximity to living cells, increases the necessity to carry out studies concerning the determination of the biomaterial surface effect on the cellular response. In achieving this goal, physicochemical characteristic of the surface can be helpful. This can be established based on topography, chemical composition, wettability, and surface energy analysis. In addition, determining the changes of these properties which can occur as a result of surface modification will allow prediction of cell behaviour when contacting with biomaterial. In the study, the Langmuir-Blodgett technique was used. It enabled the transfer of the Langmuir monolayer formed from 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) to a solid support. The DPPC film imitated a natural biological membrane capable of interacting with the components of the liquid subphase: chitosan (Ch), hyaluronic acid (HA) and/or titanium dioxide (TiO2). Depending on the type and strength of interactions of phospholipid molecules with the components of the subphase, the films obtained on the solid support were characterized by specific surface properties. Their characteristics based mainly on values of the work of adhesion in connection with films topography, allowed for statement that it is possible to form semi-interpenetrating Ch network in which HA is entrapped, contributing to the enhanced adhesion of the DPPC film, additionally intensified by TiO2 inclusion. This type of research permit for better understanding of the interactions at the interface, cell membrane-Ch/HA/TiO2 and can be important in the creation of a new generation of skin or tissue substitutes

Surface characteristics of dppc monolayers deposited from titanium dioxide–chitosan–hyaluronic acid subphases on a glass support

The Langmuir-Blodgett technique was used to transfer the monolayers of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) from the subphase containing chitosan (Ch) and/or titanium(IV) oxide (TiO2) and/or hyaluronic acid (HA) on glass plates after a low-temperature air plasma treatment. The surface free energy and its components were determined on the basis of advancing and receding contact angle measurements of water (W), formamide (F), and diiodomethane (DM). To estimate the total surface free energy (), the contact angle hysteresis (CAH) model was used, and the obtained data were compared with the results calculated from the Lifshitz-van der Waals/acid–base (LWAB) approach. It was found that the subphase components modify the surface of the phospholipid monolayer by changing the type and magnitude of interactions. They were reflected as significant differences in the obtained values of total surface free energy and its components. These findings can help in the development of composite materials, thereby expanding the spectrum of applications for chitosan, TiO2, and HA, as well as understanding the interactions between biomaterial and cell

Wetting properties of chitosan-modified and plasma-treated peek surfaces

In this paper, the wettability of chitosan/phospholipid (1,2-dipalmitoyl-sn-glycero-3-phosphocholine – DPPC), chitosan/lipid (cholesterol – Chol) and chitosan/protein (cyclosporine A – CsA) films on air plasma activated polyetheretherketone (PEEK) plates was studied. The layers were prepared using the solution spreading technique and their surface wetting properties were determined based on the measurements of the advancing and receding contact angles of water, formamide and diiodomethane. Moreover, based on the contact angle hysteresis model of Chibowski, values of total surface free energy were estimated. Significant changes in PEEK polarity were observed after plasma activation and modifications with Ch/DPPC, Ch/Chol and Ch/CsA layers. These molecules modulate the chitosan film surface by changing the type and magnitude of interactions, which is revealed in the values of surface free energy. These results may be important for the development and implementation of highly biocompatible bone substitution polymers coated with chitosan film with anti-fungal and anti-bactericidal properties. Those systems based on chitosan may also carry and release biologically active substances which could be relevant in the new generation of drug delivery systems

Wettability of DPPC Monolayers Deposited from the Titanium Dioxide–Chitosan–Hyaluronic Acid Subphases on Glass

The investigations were carried out to determine wettability of the 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) monolayers transferred from the liquid subphases containing chitosan (Ch), hyaluronic acid (HA), and/or titanium dioxide (TiO2) to a glass support by means of the Langmuir–Blodgett (LB) technique. For comparative purposes, the analysis of the plates surfaces emerged from the analogous subphases without the phospholipid film was also made. Characterization of the DPPC monolayers was based on the contact angle measurements using three test liquids (water, formamide, diiodomethane) and a simulated body fluid (SBF) solution in which the concentration of ions was close to that of human plasma. After deposition of the DPPC monolayers on the glass plates, a significant increase in the contact angles of all the probe liquids was observed compared to the plates pulled out from the given subphase without floating DPPC. The presence of phospholipid monolayer increased the hydrophobic character of the surface due to orientation of its molecules with hydrocarbon chains towards the air. In addition, the components of the subphase attached along with DPPC to the glass support modify the surface polarity. The largest changes were observed in the presence of TiO2

Effect of chitosan and lipid layers deposited onto polyethylene terephthalate (pet) on its wetting properties

The wetting properties of chitosan (Ch) and single 1,2-dipalmitoylsn-glycero-3-phosphocholine (DPPC), cholesterol (Chol) and binary DPPC-Chol layers deposited onto polyethylene terephthalate activated by low-temperature air plasma (PETair) were examined. PET is widely used in tissue engineering, but its low hydrophilicity limits its integration with the surrounding tissues. Ch is a biocompatible polysaccharide, distinguished by its antimicrobial properties, widely distributed in medicine. DPPC and Chol are the major building components of cell membrane, so they can perfectly mimic membrane behaviour during contact with the Ch layer. Monolayers of lipids were deposited onto PETair with or without the Ch layer using the Langmuir-Blodgett technique. The total surface free energy (SFE) and its components changes were calculated from theoretical approaches. Wettability strongly depended on the monolayer composition as well as the Ch layer. The Ch film decreased the contact angle and increased SFE of the PET surface with the lipid monolayers due to specific organisation of molecules within the chitosan scaffold. The most promising combination of surface modification for tissue engineering applications seems to be the PETair/Ch/DPPC-Chol system

Characterization of mixed langmuir monolayers of cyclosporine a with the phospholipid dppc at the chitosan subphase

The properties of one-component and mixed monolayers of phospholipid 1,2–dipalmitoyl–sn–glycero–3–phosphocholine (DPPC) and polypeptide cyclosporine A (CsA) on the chitosan subphase were studied. DPPC is the main component that builds biological membranes, and CsA is an immunosuppressive drug typically used in medicine to prevent transplant rejections. The stability and reversibility of compression of these insoluble monolayers in the presence of chitosan (Ch) were examined by the Langmuir technique. The stability of the monolayers depended on the monolayer composition as well as the initial pressure (π0) of the relaxation process. The smallest changes in the relative pressure as a function of time were obtained at π0 = 10 mN/m. During compression–decompression cycles, the effect of chitosan was noticeable and caused isotherm shifts

Wetting properties of phospholipid-polypeptide monolayers deposited onto polyethylene terephthalate

The paper presents changes in wettability of the unmodified and modified polyethylene terephthalate (PET) surfaces. A low temperature air plasma was used to activate the polymer surface and to change its hydrophilic–hydrophobic properties. Then, using the Langmuir-Blodgett technique, the Langmuir monolayers of 1,2–dipalmitoyl–sn–glycero–3–phosphocholine (DPPC) and cyclosporine A (CsA) with different molar fractions, i.e. χ=0.25, 0.50, 0.75, were deposited onto the activated PET surface. A series of DPPC and CsA monolayers was also transferred onto the PET-supported chitosan layer, previously produced by the dip-coating method. The wetting properties of such modified PET surfaces were then investigated by the contact angle measurements using three test liquids with well known surface tension components. The obtained results show that wettability depends on the composition of the deposited DPPC/CsA layer with or without chitosan. Presence of chitosan makes the DPPC/CsA film surface more polar due to specific organization of molecules that expose their polar heads outside