Biological Effect of Gas Plasma Treatment on CO 2

Porous polycaprolactone (PCL) scaffolds were fabricated by using the CO2 gas foaming/salt leaching process and then PCL scaffolds surface was treated by oxygen or nitrogen gas plasma in order to enhance the cell adhesion, spreading, and proliferation. The PCL and NaCl were mixed in the ratios of 3 : 1. The supercritical CO2 gas foaming process was carried out by solubilizing CO2 within samples at 50°C and 8 MPa for 6 hr and depressurization rate was 0.4 MPa/s. The oxygen or nitrogen plasma treated porous PCL scaffolds were prepared at discharge power 100 W and 10 mTorr for 60 s. The mean pore size of porous PCL scaffolds showed 427.89 μm. The gas plasma treated porous PCL scaffolds surface showed hydrophilic property and the enhanced adhesion and proliferation of MC3T3-E1 cells comparing to untreated porous PCL scaffolds. The PCL scaffolds produced from the gas foaming/salt leaching and plasma surface treatment are suitable for potential applications in bone tissue engineering

Photocatalytic Activity of Titanate Nanotube Powders in a Hybrid Pollution Control System

The photocatalytic activity on decomposition of Rhodamine B (RB) of titanate nanotubes (TNTs) synthesized by alkali hydrothermal treatment method was evaluated using a microwave/UV/photocatalyst hybrid system. The effects of each element technique as well as the synergy effects on decomposition of organic material were investigated. When TNTs were ion-exchanged with HCl, Na+ content was reduced from 8.36 wt% to 0.03 wt%, whereas the TNTs calcined at 723 K was phase-transformed into anatase structure. The RB decomposition rate increased with TNTs dosage as well as with microwave intensity. Effect of addition of auxiliary oxidants on photocatalytic decomposition of RB was also investigated. When ozone was added, the decomposition rate increased with the amount of ozone added. When H2O2 was used as the auxiliary oxidant, however, addition of H2O2 exceeding a threshold amount caused reduction of decomposition rate. A synergy effect was observed when H2O2 addition was combined with microwave-assisted photocatalysis

A novel family VII esterase with industrial potential from compost metagenomic library

<p>Abstract</p> <p>Background</p> <p>Among the vast microbial genomic resources now available, most microbes are unculturable in the laboratory. A culture-independent metagenomic approach is a novel technique that circumvents this culture limitation. For the screening of novel lipolytic enzymes, a metagenomic library was constructed from compost, and the clone of <it>estCS2 </it>was selected for lipolytic properties on a tributyrin-containing medium.</p> <p>Results</p> <p>The <it>estCS2 </it>sequence encodes a protein of 570 amino acid residues, with a predicted molecular mass of 63 kDa, and based on amino acid identity it most closely matches (45%) the carboxylesterase from <it>Haliangium ochraceum </it>DSM 14365. EstCS2 belong to family VII, according to the lipolytic enzyme classification proposed by Arpigny and Jaeger, and it retains the catalytic triad Ser₂₄₅-Glu₃₆₃-His₄₆₆that is typical of an α/β hydrolase. The Ser₂₄₅residue in the catalytic triad of EstCS2 is located in the consensus active site motif GXSXG. The EstCS2 exhibits strong activity toward <it>p</it>-nitrophenyl caproate (C6), and it is stable up to 60°C with an optimal enzymatic activity at 55°C. The maximal activity is observed at pH 9, and it remains active between pH 6-10. EstCS2 shows remarkable stability in up to 50% (v/v) dimethyl sulfoxide (DMSO) or dimethylformamide (DMF). The enzyme has the ability to cleave sterically hindered esters of tertiary alcohol, as well as to degrade polyurethanes, which are widely used in various industries.</p> <p>Conclusions</p> <p>The high stability of EstCS2 in organic solvents and its activity towards esters of ketoprofen and tertiary alcohols, and in polyurethane suggests that it has potential uses for many applications in biotransformation and bioremediation.</p

Application of Recycled Zero-Valent Iron Nanoparticle to the Treatment of Wastewater Containing Nitrobenzene

Zero-valent iron (ZVI) was synthesized using iron oxide, a byproduct of pickling line at a steel work. ZVI with a mean particle size of 500 nm was synthesized. The reaction activity of the synthesized ZVI was much higher than commercial ZVI. When applied to the decomposition of nitrobenzene (NB), the ZVI particles underwent corrosion and passivation oxide film formation, resulting in particle size decrease. The NB decomposition rate increased with increasing ZVI dosage level and with decreasing pH. The solution pH increased monotonously with increasing reaction duration, whereas the aniline concentration showed a maximum at 50 min. Based on the GC/MS analysis, NB is presumed to be reduced into aniline via reductive intermediates such as azobenzene and azoxybenzene. When combined with a subsequent biological process, the synthesized ZVI will be able to decompose NB in wastewater effectively

Newly designed coil tube for bowel decompression in patients with small bowel obstructions

AbstractBackgroundThe purpose of this study was to clinically evaluate a coil tube that we recently designed for bowel decompression in patients with a small bowel obstruction.MethodsThe coil tube was composed of a stainless steel coil, a polyolefin tube, and a rubber adaptor. The tube was inserted under fluoroscopic guidance in 14 consecutive patients with small bowel obstructions. Technical success was defined as insertion of the distal end of the tube into at least the proximal jejunum, and clinical success was defined as intestinal decompression and relief of obstructive symptoms.ResultsThe technical success rate was 100%. Clinical success was achieved in 12 patients (86%). The clinical failures were a patient with peritoneal carcinomatosis and an ileocolic fistula, and a patient with bezoars following intestinal hemorrhage. No coil-related complications occurred.ConclusionOur newly designed coil tube was safe and effective in patients with bowel decompression associated with a small bowel obstruction. In addition, our tube has several advantages over other currently used tube types

Development of Laser Ruler in Rigid Laryngoscope

ObjectivesThe objective of this study was to develop a new device that provides a simple, noninvasive method of measuring accurate lesion size while using an endoscope.MethodsWe developed a rigid laryngoscope with a built-in laser-ruler using a one-light emitting diode and an acrylic plate. The invention incorporates a built-in laser diode that projects an auto-parallel beam into the optical path of the rigid laryngoscope to form two spots in the field of view.ResultsWhile the interspot distance remains consistent despite changes in focal plane, magnification, or viewing angle of the laryngoscope, projection to an uneven surface introduces certain variations in the shape, and size of the spots, and the distance between the two spots.ConclusionThe device enables a laryngologist to easily measure the distance between landmarks, as well as the change in real size, and the progressive change of vocal fold lesions in an outpatient setting

Chiral orbital-angular-momentum in the surface states of Bi2Se3

Locking of the spin of a quasi-particle to its momentum in split bands of on the surfaces of metals and topological insulators (TIs) is understood in terms of Rashba effect where a free electron in the surface states feels an effective magnetic field. On the other hand, the orbital part of the angular momentum (OAM) is usually neglected. We performed angle resolved photoemission experiments with circularly polarized lights and first principles density functional calculation with spin-orbit coupling on a TI, Bi2Se3, to study the local OAM of the surface states. We show from the results that OAM in the surface states of Bi2Se3 is significant and locked to the electron momentum in opposite direction to the spin, forming chiral OAM states. Our finding opens a new possibility to have strong light-induced spin-polarized current in the surface states.Comment: 5 pages, 4 figures, 1 tabl