ThermoGIS: An integrated web-based information system for geothermal exploration and governmental decision support for mature oil and gas basins

In the recent years the use of geothermal energy through implementation of low enthalpy geothermal production systems for both electricity and heating have been growing rapidly in north-western Europe. Geothermal exploration and production takes largely place in sedimentary basins at depths from 2 to 5 km. Geothermal activities can take considerable advantage of a wealth of existing oil and gas data. To governmental bodies, such as geological surveys, it is a major challenge to put relevant oil and gas data and derived subsurface structural, temperature, and flow property models available to the geothermal community and to facilitate in quantitative assessment of geothermal potential of targeted areas, for both heat and electricity production (EGS) . In order to face this challenge, TNO has developed a public web-based 3D information system connected to a geothermal performance assessment tool. The public information system (thermoGIS) includes high resolution 3D geological models covering the complete onshore of the Netherlands, outlining key geothermal reservoirs and allowing to assess relevant parameters and underlying uncertainties therein. State-of-the-art 3D modeling techniques have been used and developed to obtain the reservoir structures, flow properties and temperatures, using constraints from over a thousand deep wells, and detailed subsurface mapping from 3D and 2D seismic. Users can obtain key reservoir parameters, and underlying uncertainties at any location and for any reservoir. In an automated workflow these parameters are fed into the performance assessment tool, in order to asses the probability of success to meet minimum requirements on key performance indicators such as Coefficient of Performance (COP), power produced, and Unit Technical Cost (UTC). The use of the ThermoGIS will aid exploration business decisions and Dutch governmental institutions, law makers and insurance companies

Shallow burial dolomitisation of Middle–Upper Permian paleosols in an extensional tectonic context (SE Iberian Basin, Spain): Controls on temperature of precipitation and source of fluids

This work is focused on carbonate paleosols developed in three stratigraphic sections (Landete, Talayuelas and Henarejos) of theMiddle–Late Permian Alcotas Formation in the SE Iberian Basin. The Alcotas Formation, of alluvial origin, was deposited in semi-connected half-grabens developed during the early stages of the Permian–Triassic rifting stage that affected the Iberian Basin. The studied sections were located in two of these half-grabens, the Henarejos section being much closer to the basin boundary fault than the other two sections. The mineralogy and texture of the carbonate precursor of paleosols in the three studied sections are not preserved because original carbonate is replaced by coarse crystals of dolomite and/or magnesite. Dolomite crystals are typically euhedral, displaying rhombohedral shapes and reddish luminescence, although in the Henarejos section dolomite displays non-planar boundaries and frequently saddle habit. Micas are deformed and adapted to dolomite crystals, which, in turn, are affected by stylolites, suggesting that dolomite precipitated before mechanical and chemical compaction. Carbon and oxygen isotopic compositions of dolomite fromthe three sections showdifferent values (δ13CVPDB mean values=−6.7‰,−5.5‰ and −7.5‰; δ18OVPDB mean values=−4.0‰; –5.6‰and−8.2‰, at Landete, Talayuelas and Henarejos sections, respectively). The 87Sr/86Sr ratios are similar in the three sections yielding values between 0.71391 and 0.72213. The petrographic and geochemical features of dolomite in the three studied sections suggest precipitation fromsimilar fluids and during shallow burial diagenesis. Assuming that theminimum temperature for dolomite precipitation in the Henarejos sectionwas 60 °C (as suggested by the presence of non-planar saddle habit), and that the dolomitizing fluid had similar δ18O values at the three localities, then dolomite in the Talayuelas and Landete sections precipitated at temperatures around 16 and 25 °C cooler, respectively. In addition, the δ18OVSMOW values of the water from which dolomite precipitated would have ranged between −0.3 and −2.9‰. Dolomite is partially or totally replaced by non- to dark dull luminescent magnesite in the Landete and Talayuelas sections. Magnesite crystals are affected by stylolites, indicating that it precipitated before chemical compaction. The δ13C mean values are −6.5 and −6.0‰ and the δ18OVPDB mean values are −6.7 and −7.8‰, in the Landete and Talayuelas sections, respectively. The 87Sr/86Sr ratios of magnesite are similar in both sections yielding values between 0.71258 and 0.72508. This suggests that they probably precipitated from similar fluids during progressive burial and at higher temperatures than dolomites at the same sections. Assuming thatmagnesite precipitated froma fluid with similar δ18O values in both sections, then it had to precipitate at a temperature around 8 °C higher in Talayuelas than in the Landete section. Dolomitisation and magnesite precipitation probably occurred via reflux of saline to hypersaline brines from the overlying Mid-Late Triassic Muschelkalk and/or Keuper facies. The temperatures inferred for dolomite precipitation, however, are too high for shallow burial if a normal geothermal gradient is applied. Thus, it can be inferred that salinefluidswere heated as theyflowed through the syn-sedimentary extensional faults that controlledMiddle Permian to Middle Triassic sedimentation; consequently fluidswould have been at higher temperatures near the Henarejos area, which was closer to the basin boundary fault than at the Talayuelas and Landete areas, whichwere situated further away. This contention is in agreement with recent studies which demonstrate that an important thermal event took place during Late Triassic–Early Jurassic times in the Iberian Peninsula

Lithospheric folding Iberia.

Integration of stress indicator data, gravity data, crustal kinematics data, and analysis of topography and recent vertical motions demonstrates the occurrence of consistently oriented spatial patterns of large-scale Alpine to recent intraplate deformation in Iberia. The inferred upper crustal and lithospheric deformation patterns and the timing of the associated expressions at or near the surface support the existence of a close coupling with plate boundary processes operating at the margins of Iberia. Patterns of lithosphere and upper crustal folds are oriented perpendicular to the main axis of present-day intraplate compression in Iberia inferred from structural analysis of stress indicator data and focal mechanism solutions. These findings suggest the presence of lithospheric folds, with wavelengths compatible with theoretical predictions of folding wavelengths of Variscan lithosphere. Stress-induced intraplate deformation set up by plate interactions is compatible with indications for the absence of present-day deep mantle-lithosphere interactions inferred from seismic tomography