Shear design of HSC beams with combination of links and horizontal web steel

The existing recommendations in Eurocode 2 and the British Code of Practice for the shear design of beams are derived from research conducted essentially on normal-strength concrete (NSC) with cube strengths up to 50 MPa, and it was found that the shear strengths of high-strength concrete (HSC) members made with limestone aggregate are below the characteristic resistances of identical NSC members. Previous experimental tests have also shown that significant differences exist in the angle of crack of shear failure of NSC and HSC. This paper presents data from five beam tests, which demonstrate that HSC with limestone aggregate has a reduced shear strength compared with NSC made with gravel and thus shows a gap in knowledge in the design approach to shear resistance of HSC beams. Previous investigations have suggested that horizontal web steels can contribute to the overall shear resistance of a reinforced concrete member in conjunction with the other constituents, concrete, tension and shear steel. The paper also presents data from tests on 11 beam tests and shows that the shear resistance of HSC beams is highly dependent on dowel action resulting from horizontal web bars positioned at the centre of the depth of the beam. Past attempts to quantify this dowel action are investigated and an improved design rule is proposed

Shear design of HSC beams with combination of links and horizontal web steel

The existing recommendations in Eurocode 2 and the British Code of Practice for the shear design of beams are derived from research conducted essentially on normal-strength concrete (NSC) with cube strengths up to 50 MPa, and it was found that the shear strengths of high-strength concrete (HSC) members made with limestone aggregate are below the characteristic resistances of identical NSC members. Previous experimental tests have also shown that significant differences exist in the angle of crack of shear failure of NSC and HSC. This paper presents data from five beam tests, which demonstrate that HSC with limestone aggregate has a reduced shear strength compared with NSC made with gravel and thus shows a gap in knowledge in the design approach to shear resistance of HSC beams. Previous investigations have suggested that horizontal web steels can contribute to the overall shear resistance of a reinforced concrete member in conjunction with the other constituents, concrete, tension and shear steel. The paper also presents data from tests on 11 beam tests and shows that the shear resistance of HSC beams is highly dependent on dowel action resulting from horizontal web bars positioned at the centre of the depth of the beam. Past attempts to quantify this dowel action are investigated and an improved design rule is proposed

The Bam earthquake of 26 December 2003, Iran

A post-disaster field report

Influence of central vertical bar on the behaviour of high strength concrete transfer beam-column joints

Beam column joint (BCJ) specimens tested under monotonic loading were compared with joint shear failure predicted according to EC8-NA [1] and ACI352 [2]. Inadequacy of these design codes for accurate estimations of the shear stresses at BCJ are identified. A design rule for the prediction of BCJ failure for high strength concrete (HSC) is given. The proposed method offer better accuracy when the results are compared with design rules from the above codes and research results. Finite element numerical models for BCJ specimens were compared with the experimental ones. Furthermore parametric investigations of the influence of Central Vertical Bar, CVB, on the shear capacity of HSC- BCJ were conducted. Strut and tie model for BCJ with CVB was developed to guide the designers towards using the proposed design rule to calculate the amount of shear CVB and stirrups required in order to resist the excessive joint shear