The Characteristics and Applications of Ceramic Laser Fusion and Ceramic Laser Sintering

The aim of present study is to investigate the possible application of the ceramic parts which are fabricated with the process of Ceramic Laser Fusion or Ceramic Laser Sintering. The experimental results reveal: (1) CLF can lead to a reduction in the porosity of the ceramic part but also can induce micro-cracks. Therefore, this process cannot produce a part with the required strength by a post-process of infiltration; (2) CLS is capable of fabricating a ceramic part with high porosity. By adjusting the slurry formulation and varying the scanning energy, the open porosity can be over 90vol% of the total porosity. After a post-process of infiltration, the density can be increased to 95%; therefore, CLS can apply to produce a part with high strength. Because the high open porosity leads to a good permeability, the process of CLS is suitable for the fabrication of ceramic shell mold.Mechanical Engineerin

Array concepts for solid-state and vacuum microelectronics millimeter-wave generation

The authors have proposed that the increasing demand for contact watt-level coherent sources in the millimeter- and submillimeter-wave region can be satisfied by fabricating two-dimensional grids loaded with oscillators and multipliers for quasi-optical coherent spatial combining of the outputs of large numbers of low-power devices. This was first demonstrated through the successful fabrication of monolithic arrays with 2000 Schottky diodes. Watt-level power outputs were obtained in doubling to 66 GHz. In addition, a simple transmission-line model was verified with a quasi-optical reflectometer that measured the array impedance. This multiplier array work is being extended to novel tripler configurations using blocking barrier devices. The technique has also been extended to oscillator configurations where the grid structure is loaded with negative-resistance devices. This was first demonstrated using Gunn devices. More recently, a 25-element MESFET grid oscillating at 10 GHz exhibited power combining and self-locking. Currently, this approach is being extended to a 100-element monolithic array of Gunn diodes. This same approach should be applicable to planar vacuum electron devices such as the submillimeter-wave BWO (backward wave oscillator) and vacuum FET

A dynamic method for magnetic torque measurement

In a magnetic suspension system, accurate force measurement will result in better control performance in the test section, especially when a wider range of operation is required. Although many useful methods were developed to obtain the desired model, however, significant error is inevitable since the magnetic field distribution of the large-gap magnetic suspension system is extremely nonlinear. This paper proposed an easy approach to measure the magnetic torque of a magnetic suspension system using an angular photo encoder. Through the measurement of the velocity change data, the magnetic torque is converted. The proposed idea is described and implemented to obtain the desired data. It is useful to the calculation of a magnetic force in the magnetic suspension system

Millimeter-wave diode-grid phase shifters

Monolithic diode grids have been fabricated on 2-cm square gallium-arsenide wafers with 1600 Schottky-barrier varactor diodes. Shorted diodes are detected with a liquid-crystal technique, and the bad diodes are removed with an ultrasonic probe. A small-aperture reflectometer that uses wavefront division interference was developed to measure the reflection coefficient of the grids. A Phase shift of 70° with a 7-dB loss was obtained at 93 GHz when the bias on the diode grid was changed from -3 V to 1 V. A simple transmission-line grid model, together with the measured low-frequency parameters for the diodes, was shown to predict the measured performance over the entire capacitive bias range of the diodes, as well as over the complete reactive tuning range provided by a reflector behind the grid, and over a wide range of frequencies form 33 GHz to 141 GHz. This shows that the transmission-line model and the measured low-frequency diode parameters can be used to design an electronic beam-steering array and to predict its performance. An electronic beam-steering array made of a pair of grids using state-of-the-art diodes with 5-Ω series resistances would have a loss of 1.4 dB at 90 GHz

The effects of nonlocality on the evolution of higher order fluxes in non-equilibrium thermodynamics

The role of gradient dependent constitutive spaces is investigated on the example of Extended Thermodynamics of rigid heat conductors. Different levels of nonlocality are developed and the different versions of extended thermodynamics are classified. The local form of the entropy density plays a crucial role in the investigations. The entropy inequality is solved under suitable constitutive assumptions. Balance form of evolution equations is obtained in special cases. Closure relations are derived on a phenomenological level.Comment: 16 pages, 1 figur

Millimeter-Wave Diode-Grid Frequency Doubler

Monolithic diode grid were fabricated on 2-cm^2 gallium-arsenide wafers in a proof-of-principle test of a quasi-optical varactor millimeter-wave frequency multiplier array concept. An equivalent circuit model based on a transmission-line analysis of plane wave illumination was applied to predict the array performance. The doubler experiments were performed under far-field illumination conditions. A second-harmonic conversion efficiency of 9.5% and output powers of 0.5 W were achieved at 66 GHz when the diode grid was pumped with a pulsed source at 33 GHz. This grid had 760 Schottky-barrier varactor diodes. The average series resistance was 27 Ω, the minimum capacitance was 18 fF at a reverse breakdown voltage of -3 V. The measurements indicate that the diode grid is a feasible device for generating watt-level powers at millimeter frequencies and that substantial improvement is possible by improving the diode breakdown voltage

Diffuse-interface model for rapid phase transformations in nonequilibrium systems

A thermodynamic approach to rapid phase transformations within a diffuse interface in a binary system is developed. Assuming an extended set of independent thermodynamic variables formed by the union of the classic set of slow variables and the space of fast variables, we introduce finiteness of the heat and solute diffusive propagation at the finite speed of the interface advancing. To describe the transformation within the diffuse interface, we use the phase-field model which allows us to follow the steep but smooth change of phases within the width of diffuse interface. The governing equations of the phase-field model are derived for the hyperbolic model, model with memory, and for a model of nonlinear evolution of transformation within the diffuse-interface. The consistency of the model is proved by the condition of positive entropy production and by the outcomes of the fluctuation-dissipation theorem. A comparison with the existing sharp-interface and diffuse-interface versions of the model is given.Comment: 15 pages, regular article submitted to Physical Review

Jarzynski equality for the transitions between nonequilibrium steady states

Jarzynski equality [Phys. Rev. E {\bf 56}, 5018 (1997)] is found to be valid with slight modefication for the transitions between nonequilibrium stationary states, as well as the one between equilibrium states. Also numerical results confirm its validity. Its relevance for nonequilibrium thermodynamics of the operational formalism is discussed.Comment: 5 pages, 2 figures, revte

Vortex length, vortex energy and fractal dimension of superfluid turbulence at very low temperature

By assuming a self-similar structure for Kelvin waves along vortex loops with successive smaller scale features, we model the fractal dimension of a superfluid vortex tangle in the zero temperature limit. Our model assumes that at each step the total energy of the vortices is conserved, but the total length can change. We obtain a relation between the fractal dimension and the exponent describing how the vortex energy per unit length changes with the length scale. This relation does not depend on the specific model, and shows that if smaller length scales make a decreasing relative contribution to the energy per unit length of vortex lines, the fractal dimension will be higher than unity. Finally, for the sake of more concrete illustration, we relate the fractal dimension of the tangle to the scaling exponents of amplitude and wavelength of a cascade of Kelvin waves.Comment: 12 pages, 1 figur