Ferroelectricity driven by magnetism in quasi-one-dimensional Ba9Fe3Se15

The spin-induced ferroelectricity in quasi-1D spin chain system is little known, which could be fundamentally different from those in three-dimensional (3D) system. Here, we report the ferroelectricity driven by a tilted screw spin order and its exotic dynamic in the spin-chain compound Ba9Fe3Se15. It is found that the spin-induced polarization has already occurred and exhibits magnetoelectric coupling behavior far above the long-range spin order (LRSO) at TN = 14 K. The polarized entities grow and their dynamic responses slow down gradually with decreasing temperature and permeate the whole lattice to form 3D ferroelectricity at TN. Our results reveal that the short-range spin orders (SRSOs) in the decoupled chains play a key role for the exotic dynamic in this dimension reduced system. Ba9Fe3Se15 is the only example so far which exhibits electric polarization above LRSO temperature because of the formation of SRSOs

Biomedical Applications of Electrets: Recent Advance and Future Perspectives

Recently, electrical stimulation, as a non-pharmacological physical stimulus, has been widely exploited in biomedical and clinical applications due to its ability to significantly enhance cell proliferation and differentiation. As a kind of dielectric material with permanent polarization characteristics, electrets have demonstrated tremendous potential in this field owing to their merits of low cost, stable performance, and excellent biocompatibility. This review provides a comprehensive summary of the recent advances in electrets and their biomedical applications. We first provide a brief introduction to the development of electrets, as well as typical materials and fabrication methods. Subsequently, we systematically describe the recent advances of electrets in biomedical applications, including bone regeneration, wound healing, nerve regeneration, drug delivery, and wearable electronics. Finally, the present challenges and opportunities have also been discussed in this emerging field. This review is anticipated to provide state-of-the-art insights on the electrical stimulation-related applications of electrets

Multi-cavity locally resonant structure with the low frequency and broad band-gaps

A multi-cavity periodic structure with the characteristic of local resonance was proposed in the paper. The low frequency band-gap structure was comparatively analyzed by the finite element method (FEM) and electric circuit analogy (ECA). Low frequency band-gap can be opened through the dual influence of the coupling’s resonance in the cavity and the interaction among the couplings between structures. Finally, the influence of the structural factors on the band-gap was analyzed. The results show that the structure, which is divided into three parts equally, has a broader effective band-gap below the frequency of 200 Hz. It is also proved that reducing the interval between unit structures can increase the intensity of the couplings among the structures. And in this way, the width of band-gap would be expanded significantly. Through the parameters adjustment, the structure enjoys a satisfied sound insulation effect below the frequency of 500Hz. In the area of low frequency noise reduction, the structure has a lot of potential applications

Earth rotation parameter and variation during 2005–2010 solved with LAGEOS SLR data

Time series of Earth rotation parameters were estimated from range data measured by the satellite laser ranging technique to the Laser Geodynamics Satellites (LAGEOS)-1/2 through 2005 to 2010 using the dynamic method. Compared with Earth orientation parameter (EOP) C04, released by the International Earth Rotation and Reference Systems Service, the root mean square errors for the measured X and Y of polar motion (PM) and length of day (LOD) were 0.24 and 0.25 milliarcseconds (mas), and 0.068 milliseconds (ms), respectively. Compared with ILRSA EOP, the X and Y of PM and LOD were 0.27 and 0.30 mas, and 0.054 ms, respectively. The time series were analyzed using the wavelet transformation and least squares methods. Wavelet analysis showed obvious seasonal and interannual variations of LOD, and both annual and Chandler variations of PM; however, the annual variation could not be distinguished from the Chandler variation because the two frequencies were very close. The trends and periodic variations of LOD and PM were obtained in the least squares sense, and PM showed semi-annual, annual, and Chandler periods. Semi-annual, annual, and quasi-biennial cycles for LOD were also detected. The trend rates of PM in the X and Y directions were 3.17 and −1.60 mas per year, respectively, and the North Pole moved to 26.8°E relative to the crust during 2005–2010. The trend rate of the LOD change was 0.028 ms per year

Citric Acid Loaded Hydrogel-Coated Stent for Dissolving Pancreatic Duct Calculi

In recent years, the incidence of chronic pancreatitis has increased significantly. Pancreatic calculi obstruct the pancreatic duct and induce abdominal pain in the patients. Pancreatic duct stenting is the major treatment option for chronic pancreatitis with calculi. In this study, a new kind of drug-eluting stent, a pancreatic stent coated by methacrylated gelatin (GelMA) hydrogel loaded with citric acid (CA), was designed for the interventional treatment of pancreatic duct calculi. The CA loading capacity reached up to 0.7 g CA/g hydrogel-coated stent. The GelMA hydrogel coating has higher mechanical strength and lower swelling performance after loading with CA. The in vitro experiments of stents exhibited good performance in CA sustained release and the calculi can be dissolved in almost 3 days. The stents also showed good blood compatibility and cell compatibility. This research has important clinical value in the treatment of chronic pancreatitis with pancreatic calculi

Preparation and Characterization of Biocompatible Iron/Zirconium/Polydopamine/Carboxymethyl Chitosan Hydrogel with Fenton Catalytic Properties and Photothermal Efficacy

In recent years, multifunctional hydrogel nanoplatforms for the synergistic treatment of tumors have received a great deal of attention. Here, we prepared an iron/zirconium/polydopamine/carboxymethyl chitosan hydrogel with Fenton and photothermal effects, promising for future use in the field of synergistic therapy and prevention of tumor recurrence. The iron (Fe)–zirconium (Zr)@ polydopamine (PDA) nanoparticles were synthesized by a simple one-pot hydrothermal method using iron (III) chloride hexahydrate (FeCl3•6H2O), zirconium tetrachloride (ZrCl4), and dopamine, followed by activation of the carboxyl group of carboxymethyl chitosan (CMCS) using 1-(3-Dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride (EDC)/N(4)-hydroxycytidine (NHS). Finally, the Fe–Zr@PDA nanoparticles and the activated CMCS were mixed to form a hydrogel. On the one side, Fe ions can use hydrogen peroxide (H2O2) which is rich in the tumor microenvironment (TME) to produce toxic hydroxyl radicals (•OH) and kill tumor cells, and Zr can also enhance the Fenton effect; on the other side, the excellent photothermal conversion efficiency of the incorporated PDA is used to kill tumor cells under the irradiation of near-infrared light. The ability of Fe–Zr@PDA@CMCS hydrogel to produce •OH and the ability of photothermal conversion were verified in vitro, and swelling and degradation experiments confirmed the effective release and good degradation of this hydrogel in an acidic environment. The multifunctional hydrogel is biologically safe at both cellular and animal levels. Therefore, this hydrogel has a wide range of applications in the synergistic treatment of tumors and the prevention of recurrence

Investigation on Step-Bunched Homoepitaxial Layers Grown on On-Axis 4H-SiC Substrates via Molten KOH Etching

Wafer-scale on-axis 4H-SiC epitaxial layers with very low roughness were obtained in this study. By performing carbon-rich hydrogen etching and epitaxial growth of the epitaxial layer at different temperatures, local mirror regions (LMRs) with root mean square (RMS) roughness less than 0.2 nm were obtained on the epitaxial layer surface. The LMRs’ length is tens of millimeters, and the width is sub-millimeters. The step-flow growth induced by threading screw dislocations (TSDs) was observed on the epitaxial layer surface by atomic force microscopy (AFM), together with the double bi-atomic step-flow growth induced by the step bunch, which was the cause of LMRs. Furthermore, the growth mechanism was investigated by wet etching. The etching pits were found to be associated with 3C-SiC and their effect on the growth rate of epitaxial layers was further explored

Investigation on Step-Bunched Homoepitaxial Layers Grown on On-Axis 4H-SiC Substrates via Molten KOH Etching

Wafer-scale on-axis 4H-SiC epitaxial layers with very low roughness were obtained in this study. By performing carbon-rich hydrogen etching and epitaxial growth of the epitaxial layer at different temperatures, local mirror regions (LMRs) with root mean square (RMS) roughness less than 0.2 nm were obtained on the epitaxial layer surface. The LMRs’ length is tens of millimeters, and the width is sub-millimeters. The step-flow growth induced by threading screw dislocations (TSDs) was observed on the epitaxial layer surface by atomic force microscopy (AFM), together with the double bi-atomic step-flow growth induced by the step bunch, which was the cause of LMRs. Furthermore, the growth mechanism was investigated by wet etching. The etching pits were found to be associated with 3C-SiC and their effect on the growth rate of epitaxial layers was further explored