A solder-pump through wafer interconnection technology for advanced packaging

EThOS - Electronic Theses Online ServiceGBUnited Kingdo

A High-Voltage-Isolated MEMS Quad–Solenoid Transformer with Specific Insulation Barriers for Miniaturized Galvanically Isolated Power Applications

The paper reports on high voltage (HV)-isolated MEMS quad–solenoid transformers for compact isolated gate drivers and bias power supplies. The component is wafer-level fabricated via a novel MEMS micro-casting technique, where the tightly coupled quad–solenoid chip consists of monolithically integrated 3D inductive coils and an inserted ferrite magnetic core for high-efficiency isolated power transmission through electromagnetic coupling. The proposed HV-isolated transformer demonstrates a high inductance value of 743.2 nH, along with a small DC resistance of only 0.39 Ω in a compact footprint of 6 mm2, making it achieve a very high inductance integration density (123.9 nH/mm2) and the ratio of L/R (1906 nH/Ω). More importantly, with embedded ultra-thick serpentine-shaped (S-shaped) SiO2 isolation barriers that completely separate the primary and secondary windings, an over 2 kV breakdown voltage is obtained. In addition, the HV-isolated transformer chips exhibit a superior power transfer efficiency of over 80% and ultra-high dual-phase saturation current of 1.4 A, thereby covering most practical cases in isolated, integrated bias power supplies such as high-efficiency high-voltage-isolated gate driver solutions

Arousing Effects of Electroacupuncture on the “Shuigou Point” in Rats with Disorder of Consciousness after Traumatic Brain Injury

Orexin is an important neuropeptide that stimulates cortical activation and arousal and is involved in the regulation of wakefulness and arousal. Our previous meta-analysis showed that acupuncture fared well in the treatment of TBI-induced DOC in which “shuigou (DU 26)” was the most important and frequent point targeted. In the present study, we investigated whether electroacupuncture (EA) promotes TBI-induced unconsciousness wakefulness via orexin pathway. A TBI rat model was established using a control cortical impact (CCI) model. In the stimulated group, TBI rats received EA (15 Hz, 1.0 mA, 15 min). In the antagonist group, TBI rats were intraperitoneally injected with the orexin receptor 1 (OX1R) antagonist SB334867 and received EA. Unconsciousness time was observed in each group after TBI, and electrocorticography (ECoG) was applied to detect rats’ EEG activity. Immunohistochemistry, enzyme-linked immunosorbent assay, and western blot were used to assess the levels of orexin-1(OX1) and OX1R expression in the mPFC. We show that duration of unconsciousness and the ratio of delta power in ECoG in the EA group were significantly reduced compared with those in the TBI group. EA could increase OX1 and OX1R expression in the mPFC and reduced the loss of orexin-producing neurons in LHA. However, all the efficacy of EA was blocked by the OX1R antagonist SB334867. Our findings suggest that EA promotes the recovery of consciousness of TBI-induced unconscious rats via upregulation of OX1and OX1R expression in mPFC

MEMS-Casting Fabricated Chip-Style 3D Metal Solenoidal Transformers towards Integrated Power Supply

A silicon-chip-based 3D metal solenoidal transformer is proposed and developed to achieve AC-DC conversion for integrated power supply applications. With wafer-level micro electromechanical systems (MEMS) fabrication technique to form the metal casting mold and the following micro-casting technique to rapidly (within 6 min) fill molten ZnAl alloy into the pre-micromachined silicon mold, 45-turns primary solenoid and 7-turns secondary solenoid are fabricated in silicon wafers, where the two intertwining solenoids are located at inner deck and outer deck, respectively. Permalloy soft magnetic core is inserted into a pre-etched channel in the silicon chip, which is surrounded by the solenoids. The size of the chip-style transformer is as small as 8.5 mm × 6.6 mm × 2.5 mm. The internal resistance of the primary solenoid is 1.82 Ω and that of the secondary solenoid is 0.16 Ω. The working frequency of the transformer is 60 kHz. Combined with the testing circuit of the switch mode power supply, the DC voltage of 13.02 V is obtained when the input is 110 V at 50 Hz/60 Hz. Furthermore, the on-chip 3D solenoidal transformer is used for lighting four LEDs, which shows great potential for AC-DC power supply. The wafer-level fabricated chip-style solenoidal AC-DC transformer for integrated power supply is advantageous in uniform fabrication, small size and volume applications