A Dopa Decarboxylase Modulating the Immune Response of Scallop Chlamys farreri

BACKGROUND: Dopa decarboxylase (DDC) is a pyridoxal 5-phosphate (PLP)-dependent enzyme that catalyzes the decarboxylation of L-Dopa to dopamine, and involved in complex neuroendocrine-immune regulatory network. The function for DDC in the immunomodulation remains unclear in invertebrate. METHODOLOGY: The full-length cDNA encoding DDC (designated CfDDC) was cloned from mollusc scallop Chlamys farreri. It contained an open reading frame encoding a polypeptide of 560 amino acids. The CfDDC mRNA transcripts could be detected in all the tested tissues, including the immune tissues haemocytes and hepatopancreas. After scallops were treated with LPS stimulation, the mRNA expression level of CfDDC in haemocytes increased significantly (5.5-fold, P<0.05) at 3 h and reached the peak at 12 h (9.8-fold, P<0.05), and then recovered to the baseline level. The recombinant protein of CfDDC (rCfDDC) was expressed in Escherichia coli BL21 (DE3)-Transetta, and 1 mg rCfDDC could catalyze the production of 1.651±0.22 ng dopamine within 1 h in vitro. When the haemocytes were incubated with rCfDDC-coated agarose beads, the haemocyte encapsulation to the beads was increased significantly from 70% at 6 h to 93% at 24 h in vitro in comparison with that in the control (23% at 6 h to 25% at 24 h), and the increased haemocyte encapsulation was repressed by the addition of rCfDDC antibody (which is acquired via immunization 6-week old rats with rCfDDC). After the injection of DDC inhibitor methyldopa, the ROS level in haemocytes of scallops was decreased significantly to 0.41-fold (P<0.05) of blank group at 12 h and 0.47-fold (P<0.05) at 24 h, respectively. CONCLUSIONS: These results collectively suggested that CfDDC, as a homologue of DDC in scallop, modulated the immune responses such as haemocytes encapsulation as well as the ROS level through its catalytic activity, functioning as an indispensable immunomodulating enzyme in the neuroendocrine-immune regulatory network of mollusc

Author Correction: The flying spider-monkey tree fern genome provides insights into fern evolution and arborescence (Nature Plants, (2022), 8, 5, (500-512), 10.1038/s41477-022-01146-6)

Correction to: Nature Plantshttps://doi.org/10.1038/s41477-022-01146-6, published online 9 May 2022. In the version of the article initially published, Dipak Khadka, who collected the samples in Nepal, was thanked in the Acknowledgements instead of being listed as an author. His name and affiliation (GoldenGate International College, Tribhuvan University, Battisputali, Kathmandu, Nepal) have been added to the authorship in the HTML and PDF versions of the article

C-Type Lectin in Chlamys farreri (CfLec-1) Mediating Immune Recognition and Opsonization

Background: C-type lectins are a superfamily of Ca 2+ dependent carbohydrate-recognition proteins that play significant diverse roles in nonself-recognition and clearance of invaders. Though they are well characterized in vertebrates, the study of the potential function and mechanism of C-type lectins in invertebrate immunity is still in its infancy. Methodology: A C-type lectin (CfLec-1) from scallop Chlamys farreri, a dominant cultured mollusk species in China, was selected to investigate its mRNA expression, localization and the possible functions in innate immunity in the present study. After scallop was stimulated by three typical PAMPs, the mRNA expression of CfLec-1 in hemocytes was poles apart. It was significantly up-regulated (p,0.01) after scallops were stimulated by LPS or b-glucan, but significantly down-regulated (p,0.01) after PGN stimulation. The binding ability of recombinant CfLec-1 (designated as rCfLec-1) towards eight PAMPs was investigated subsequently by PAMPs microarray, which revealed rCfLec-1 could bind LPS, PGN and mannan in vitro, indicating CfLec-1 served as a PRR involved in the pathogen recognition. Immunofluorescence assay with polyclonal antibody specific for CfLec-1 revealed that CfLec-1 was mainly located in the mantle and gill of the scallop. CfLec-1 could bind to the surface of scallop hemocytes and recruited hemocytes to enhance their encapsulation in vitro, and this process could be specifically blocked by anti-rCfLec-1 antibody. Meanwhile, rCfLec-1 could also enhance the phagocytic activity of scallop hemocytes against Escherichia coli

Effect of ageing on the microstructural evolution in a new design of maraging steels with carbon

A new maraging steel, based on carbide precipitation, is described. Two alloys were designed namely Fe-10Mn-0.25C-2Cr-1Mo wt% (2CrMo) and Fe-10Mn-0.25C-1Cr-2Mo wt% (Cr2Mo). These compositions were chosen to achieve ultra-high strength and high tensile elongation; the former and latter are promoted through the simulatenous precipitation of Cr- and Mo-rich carbides and Mn-rich reverted austenite. The alloys were manufactured through the standard melting, casting and hot working route. Following a solution treatment at 870 °C and quench, which gave a fully martensitic structure, the alloys were aged for various times at 510 °C. The microstructure and tensile properties were investigated in detail as a function of ageing time. The microstructure observed was dominated by micron scale and nanometre scale Mn segregation which determined the local Ac3 temperature. Austenite reversion occurred in both alloys, peaking at 16 h in both cases. In the 2CrMo alloy, the reverted austenite was mainly globular in morphology due the Ac3 temperature being lower than the ageing temperature, but was acicular in the Cr2Mo with Ac3 similar to the ageing temperature of 510 °C. Moreover, acicular austenite was promoted by Mn segregation at martensite lath boundaries in Cr2Mo. In the 2CrMo steel, carbide precipitation (M3C and M7C3) occurred during heating to the ageing temperature, but the carbides gradually dissolved with further ageing. In contrast, in the Cr2Mo alloy, precipitation of carbides (M7C3 and M2C) occurred during ageing, the volume fraction of which increased with ageing time. In both alloys a TRIP effect was observed, but the extent of this was greater for the Cr2Mo alloy. The complex microstructure obtained after 16 h led to an excellent combination of strength of 1.3 GPa and elongation of 18%. Physics-based models for the microstructure in martensite, precipitation kinetics, as well as for TRIP in austenite were employed to explain and predict the individual strengthtening contributions of the microstructure to the total strength, confirming that the maximum strength-elongation relationship found after 16 h is due to an optimal combination of a slightly overaged - but still strong- martensite and 30% of reverted austenite, for increased work hardening and ductility

Research on battery peak power control method based on Improved PSO algorithm

In order to better guarantee the operation effect of power equipment, a battery discharge peak power control method based on Improved PSO algorithm is proposed. The operation parameters between the peak power of battery discharge and external power supply are collected, and the operation parameters are switched by using the support bus. The power acquisition process of battery operation is standardized, and the power of battery power conversion unit is controlled by improving PSO algorithm. The results show that the control error of the battery peak power control method based on the improved PSO algorithm is significantly lower in the actual process, and the control accuracy is improved

Rationale and Clinical Research Progress on PD-1/PD-L1-Based Immunotherapy for Metastatic Triple-Negative Breast Cancer

Metastatic triple-negative breast cancer (mTNBC), a highly aggressive and malignant tumor, currently lacks an effective treatment. There has been some progress in the treatment of mTNBC with programmed death receptor-1/programmed death ligand-1 (PD-1/PD-L1) immunotherapy in recent years. The combination of PD-1/PD-L1 inhibitors with other therapies is a noteworthy treatment strategy. Immunotherapy in combination with chemotherapy or small-molecule inhibitors still faces many challenges. Additionally, there are some new immunotherapy targets in development. We aimed to further evaluate the effectiveness and usefulness of immunotherapy for treating mTNBC and to propose new immunotherapy strategies. This review explains the rationale and results of existing clinical trials evaluating PD-1/PD-L1 inhibitors alone or in combination for the treatment of mTNBC. For patients with aggressive tumors and poor health, PD-1/PD-L1 inhibitors, either alone or in combination with other modalities, have proven to be effective. However, more research is needed to explore more effective immunotherapy regimens that will lead to new breakthroughs in the treatment of mTNBC

Self-Alignment Capillary Gripper for Microfiber Manipulation

The assembly and arrangement of microfibers have wide applications in biomedicine, material science, and microsystem. However, current micromanipulation methods for positioning and orientating individual microfibers are complex and hard to use. In this article, we report a novel self-alignment capillary gripper for microfiber manipulation that is facile and convenient. We determine the key parameters of the gripper including the required meniscus volume and the tip aspect ratio of the gripper through both numerical simulation and experimental investigation. A two-stage self-alignment process is employed to achieve high precision. The gripper can pick up and self-align microfibers with an aspect ratio of up to 300:1 at an accuracy of 2.1 ± 2.0 m and 0.6 ± 0.6 ° or better and create highly parallel linear arrays. The gripper is also versatile, where multiple types of microfibers including glass fibers, carbon fibers, dandelion seed fibers, and cat hairs can be picked up and self-aligned. Additionally, the gripper can construct two-dimensional patterns and plug a fiber into a microglass capillary.Peer reviewe